1、3. DIMENSIONS AND TOLERANCES: Dimensions and tolerances not shown shall be in accordance with the 4. TWDS: Tp“hIads shall be in accordance with Screw-Thread Standards for.Federa1 Services, Handbook Passivatior. treatment in accordance with procureeebt specification. ME Standard for 37 Degree Flared
2、Fittings (SAE 5514). na. S. PART NUMBER: ne )(S part amber consists of the US nurber plus the darh nuaber A. For body onl cadrim plated, use the US number, plus the body dash number. B. For caplete assembly (with nuts and sleeves), cadrium plated, use the MS number C. gor zinc coating add (2) to the
3、 dash number. Example: WS51519B22 or D. For phos hate coating add (P) to the dash number. Example: HS5151982P E. For corrosion-resisting steel add (S) to the dash number. hple : USIBSZ. lus the assembly dash number. Example: MSS1519A2. MS51519622. or MS515E962P. Example: MS51519BZS or MS51519AZS. 6.
4、 ?or design feature purpores, this standard takes precedence over procurement documents referenced herein. 7. Reference docuents shall be of the issue in effect on date of invitations for bid. 8. The illustration is for identification purpose only and is not intended to restrict designs and mhapes m
5、ot iiwmsioned. 9. Procure the O-lints separately and install irediatelv before installation of fittinIs 10After 17 January 1979 bodies will be used for production Only and SHALL NOT be stockedfor maintenance. Existing stock of bodies should be used until depleted. f ED. SUP CLASS LI - LEEVE- MS515 S
6、TRAIGHT THREAD NOTES : 1. JUTLRIN: Steel. carbon in accordance with Drocurement suecification. 2. FROTCCTIVE COATIh: Cadmium plated ln accordance with procurement specification. Steel corrosion-resistin6 in accbrdance with brocurement specification. Zinc plated in accordance with procurement specification. Phosphate coating in accordance with Drocurement sDecification. l I Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
