1、MS53875 REV A 47 W 9797732 00310b7 7 = TUBL 0.D. )ASH NLXBER 1 1: 3/8 1/4 2 12 3/R 3 i - 13 :fi 3/8 SEE NOTE 9 I 4730 +LI- 4 B B1 C2 D D1 G1 G2 L1 s STRAIGHT STRAIGHT HEX DIA DIA DIA DIA CLASS 2A CLASS 2A NOH DRILL DRILL -0.003 -0.003 ?0.02 H.AX THREAD FLAT +0.002 +0.002 THREAD 9/16-18UNF 7/16-20UNF
2、 13/16 0.281 0.203 0.482 0.364 1.22 0.60 3/4 -16UNF 9/16-16UNF 1 0.422 0.282 0.660 C.482 1.33 0.69 1-1/16-12UN 9/16-18UNF 1-3/8 0.656 0.281 0.945 0.482 1.60 0.88 LhlJT-MS51823 LLO-RING MS28778 LCiEEVE-MS5825 (SEE NOTE IO) NOTES: 1. MATERIAL: Steel carbon in accbrdance with procurcient specification.
3、 Steel: corrosion-resisting in accordance with procureient specification. 2. PHOTECTIVE COLTIhl;: Cadmium platrd in accordance with procurrnent rpecifiration. Zinc lited in accordance with procuremcnt specification. PhorpRatr coating in accordance with procuremcnt specification. Passivation treatmen
4、t in accordance .with procurrmrnt specification. 3. DIMENSIONS AND TOLERANCES: Diicnsionc and tolerances not shown shill br in accordance with the SAE Standard for Flareless Tube Fittings (SAE JS14). 4. m: Threads shill be in accordance with Screw-Thread Standards for Federal Services, FED-CTD-HZR.
5、5. PART NIMBER: Rie US part number consists of the HS number. plus the dash number and (for complete assembly) the applicable US51625 sleeve style designator. A. For complete assembly (with nuts and sleeves), cadmium plated, use the US number, plus the assembly dash number and the sleeve style desig
6、nator. Example: US5lU95-lA or HS51895-1B. B. For body only, cadmium plated, use the US number and the body dash number. Example: HS51695-11. C. For zinc coating add “2“ and (for complete assembly) the sleeve style designator to the dash number. Example: US51U95-lZA or EIS51895-IZB or US51695-112. Fo
7、r phosphate coating add “P“ and (for complete assembly) the sleeve style designator to the dash number. Example: US51U95-IPA or us51895-IPB or HS51895-LIP. D. E. For corrosion-resisting steel add “SC“ and (for complete assembly) the sleeve style designator to the dash number. Example: US51895-ISSA o
8、r US51695-LSSB or HS51895-IlCC. fi. For design frature purpose, this standard takes precedence over procurrient documents rcfer- rncrd herein. i. Heercncr docmcnts shall br of the issue in effect on date of invitations for bid. 8. The illustration is for identification and is not intended to restric
9、t designs or shapes not dimrnsionrd. Y. At manufacturers optian, through passages NY conform with the suller diameter specified or at the appropriate end my be counterbored to the larger dianeter for depth S. 10. . Procure thr O-Rings separately and install isediitely before installation of thc fitting. The bodies will be usrd for production only and SHALL NOT be stocked far maintenance. *ll. r- 03 m rl Denotes change MILITARY STANDARD AR TITLE P.A Cihw Cusi SH REWCER,TUBE,LARGE HEX, O-RING, ci Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
