1、 REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Update to reflect latest changes in format and requirements. Editorial changes throughout. -les 05-01-27 Raymond Monnin B Update drawing as part of 5 year review. -jt 11-02-01 C. SAFFLE THE ORIGINAL FIRST PAGE OF THIS DRAWING HAS BEEN REPLACED. C
2、URRENT CAGE CODE 67268 REV SHEET REV SHEET REV STATUS REV B B B B B B B B B B OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 PMIC N/A PREPARED BY David W. Queenan DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 http:/www.dscc.dla.mil STANDARD MICROCIRCUIT DRAWING THIS DRAWING IS AVAILABLE FOR USE BY ALL DEPAR
3、TMENTS AND AGENCIES OF THE DEPARTMENT OF DEFENSE CHECKED BY D. A. DiCenzo APPROVED BY N. A. Hauck MICROCIRCUIT, DIGITAL, BIPOLAR, BCD COUNTER MONOLITHIC SILICON DRAWING APPROVAL DATE 87-02-03 AMSC N/A REVISION LEVEL B SIZE A CAGE CODE 14933 5962-86727 SHEET 1 OF 10 DSCC FORM 2233 APR 97 5962-E205-11
4、 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-86727 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL B SHEET 2 DSCC FORM 2234 APR 97 1. SCOPE 1.1 Scope. This drawing describes device requirem
5、ents for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A. 1.2 Part or Identifying Number (PIN). The complete PIN is as shown in the following example: 5962-86727 01 E X Drawing number Device type (see 1.2.1) Case outline (see 1.2.2) Lead finish
6、 (see 1.2.3) 1.2.1 Device type. The device type identify the circuit function as follows: Device type Generic number Circuit function 01 93S16 4 bit binary counter 1.2.2 Case outlines. The case outlines are as designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals
7、 Package style E GDIP1-T16 or CDIP2-T16 16 dual-in-line F GDFP2-F16 or CDFP3-F16 16 flat 1.2.3 Lead finish. The lead finish is as specified in MIL-PRF-38535, appendix A. 1.3 Absolute maximum ratings. Supply voltage range -0.5 V dc to +7.0 V dc Input voltage range . -1.5 V dc to +7.0 V dc Storage tem
8、perature range . -65C to +150C Maximum power dissipation (PD) 1/ 1.25 W Lead temperature (soldering, 10 seconds) . +300C Thermal resistance, junction-to-case (JC) . See MIL-STD-1835 Junction temperature (TJ) +150C DC output voltage range -0.5V to +VCCmaximum DC input current -30 mA to +5.0 mA DC out
9、put current into output . +30 mA 1.4 Recommended operating conditions. Supply voltage (VCC) . -4.5 V dc to 5.5 V dc Minimum high level input voltage (VIH) . 2.0 V dc Maximum low level input voltage (VIL) 0.8 V dc Ambient operating temperature range (TA) . -55C to +125C _ 1/ Maximum power dissipation
10、 is defined as VCCx ICC, and must withstand the added PDdue to short-circuit test; e.g., IOS. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-86727 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEV
11、EL B SHEET 3 DSCC FORM 2234 APR 97 2. APPLICABLE DOCUMENTS 2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those cit
12、ed in the solicitation or contract. DEPARTMENT OF DEFENSE SPECIFICATION MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for. DEPARTMENT OF DEFENSE STANDARDS MIL-STD-883 - Test Method Standard Microcircuits. MIL-STD-1835 - Interface Standard Electronic Component Case Outline
13、s. DEPARTMENT OF DEFENSE HANDBOOKS MIL-HDBK-103 - List of Standard Microcircuit Drawings. MIL-HDBK-780 - Standard Microcircuit Drawings. (Copies of these documents are available online at https:/assist.daps.dla.mil/quicksearch/ or from the Standardization Document Order Desk, 700 Robbins Avenue, Bui
14、lding 4D, Philadelphia, PA 19111-5094.) 2.2 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text of this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exe
15、mption has been obtained. 3. REQUIREMENTS 3.1 Item requirements. The individual item requirements shall be in accordance with MIL-PRF-38535, appendix A for non-JAN class level B devices and as specified herein. Product built to this drawing that is produced by a Qualified Manufacturer Listing (QML)
16、certified and qualified manufacturer or a manufacturer who has been granted transitional certification to MIL-PRF-38535 may be processed as QML product in accordance with the manufacturers approved program plan and qualifying activity approval in accordance with MIL-PRF-38535. This QML flow as docum
17、ented in the Quality Management (QM) plan may make modifications to the requirements herein. These modifications shall not affect form, fit, or function of the device. These modifications shall not affect the PIN as described herein. A “Q“ or “QML“ certification mark in accordance with MIL-PRF-38535
18、 is required to identify when the QML flow option is used. 3.2 Design, construction, and physical dimensions. The design, construction, and physical dimensions shall be as specified in MIL-PRF-38535, appendix A and herein. 3.2.1 Case outlines. The case outlines shall be in accordance with 1.2.2 here
19、in. 3.2.2 Terminal connections. The terminal connections shall be as specified on figure 1. 3.2.3 Truth table. The truth table shall be as specified on figure 2. 3.2.4 Logic diagram. The logic diagram shall be as specified on figure 3. 3.3 Electrical performance characteristics. Unless otherwise spe
20、cified herein, the electrical performance characteristics are as specified in table I and shall apply over the full ambient operating temperature range. 3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table II. The electrical tests for each subg
21、roup are described in table I. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-86727 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL B SHEET 4 DSCC FORM 2234 APR 97 3.5 Marking. Marking shall b
22、e in accordance with MIL-PRF-38535, appendix A. The part shall be marked with the PIN listed in 1.2 herein. In addition, the manufacturers PIN may also be marked. For packages where marking of the entire SMD PIN number is not feasible due to space limitations, the manufacturer has the option of not
23、marking the “5962-“ on the device. 3.5.1 Certification/compliance mark. A compliance indicator “C” shall be marked on all non-JAN devices built in compliance to MIL-PRF-38535, appendix A. The compliance indicator “C” shall be replaced with a “Q“ or “QML“ certification mark in accordance with MIL-PRF
24、-38535 to identify when the QML flow option is used. 3.6 Certificate of compliance. A certificate of compliance shall be required from a manufacturer in order to be listed as an approved source of supply in MIL-HDBK-103 (see 6.6 herein). The certificate of compliance submitted to DLA Land and Mariti
25、me -VA prior to listing as an approved source of supply shall affirm that the manufacturers product meets the requirements of MIL-PRF-38535, appendix A and the requirements herein. 3.7 Certificate of conformance. A certificate of conformance as required in MIL-PRF-38535, appendix A shall be provided
26、 with each lot of microcircuits delivered to this drawing. 3.8 Notification of change. Notification of change to DLA Land and Maritime -VA shall be required for any change that affects this drawing. 3.9 Verification and review. DLA Land and Maritime, DLA Land and Maritime s agent, and the acquiring
27、activity retain the option to review the manufacturers facility and applicable required documentation. Offshore documentation shall be made available onshore at the option of the reviewer. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICR
28、OCIRCUIT DRAWING SIZE A 5962-86727 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL B SHEET 5 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics. Test Symbol Conditions -55C TA +125C unless otherwise specified Group A subgroups Device type Limits Unit Min Max High le
29、vel output voltage VOHVCC= 4.5 V, IOH= -1.0 mA, 1, 2, 3 All 2.5 V VIN= 0.8 V or 2.0 V Low level output voltage VOLVCC= 4.5 V, IOL= 20 mA VIN= 0.8 V or 2.0 V 1, 2, 3 All 0.5 V Input clamp voltage VI CVCC= 4.5 V, IIN= -18 mA 1, 2, 3 All -1.2 V Low level input current IILVCC= 5.5 V, P, MR , CEP 1, 2, 3
30、 All -2.0 mA VIN= 0.5 V CET -3.0 PE -4.0 CP -5.0 High level input current IIHVCC= 5.5 V, P, MR , CEP 1, 2, 3 All 50 A VIN= 2.7 V CET 75 PE 100 CP 125 VCC= 5.5 V, VIN= 5.5 V 1, 2, 3 All 1.0 mA Short circuit output current IOSVCC= 5.5 V, VOUT= 0.0 V 1/ 1, 2, 3 All -40 -100 mA Supply current ICCVCC= 5.
31、5 V, Measured with MR = 0 V, all other inputs high and all outputs open 1, 2, 3 All 127 mA Functional tests See 4.3.1C 7, 8 All Propagation delay from tPLH1CL= 15 pF 10%, TA= 25C, 2/ 9 All 9 ns clock to Q output RL= 280 5% 3/ 9, 10, 11 All 11 ns tPHL1TA= 25C, 2/ 9 All 13 ns 3/ 9, 10, 11 All 15 ns Pr
32、opagation delay from tPLH2TA= 25C, 2/ 9 All 18 ns clock to TC 3/ 9, 10, 11 All 20 ns tPHL2TA= 25C, 2/ 9 All 12 ns 3/ 9, 10, 11 All 14 ns Propagation delay from tPLH3TA= 25C, 2/ 9 All 10 ns CET to TC 3/ 9, 10, 11 All 12 ns tPHL3TA= 25C, 2/ 9 All 10 ns 3/ 9, 10, 11 All 11 ns See footnotes at end of ta
33、ble. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-86727 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL B SHEET 6 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics - Cont
34、inued. Test Symbol Conditions -55C TA +125C unless otherwise specified Group A subgroups Device type Limits Unit Min Max Propagation delay from tPHL4CL= 15 pF 10%, TA= 25C, 2/ 9 All 20 ns MR to Q RL= 280 5% 3/ 9, 10, 11 22 Recovery time for MR ttec TA= 25C, 2/ 9 All 6 ns (inactive) 3/ 9, 10, 11 8 Ma
35、ster reset (MR ) pulse tpw1TA= 25C, 2/ 9 All 13 ns width 3/ 9, 10, 11 17 Clock pulse width tPw22/ TA= 25C, HIGH 9 All 6 ns LOW 9, 10, 11 10 3/ TA= 25C, HIGH 9 All 8 ns LOW 9, 10, 11 13 Data setup time ts1TA= 25C, 2/ 9 All 8 ns 3/ 9, 10, 11 10 Data hold time th1TA= 25C, 2/ 9 All 0 ns 3/ 9, 10, 11 0 P
36、E setup time ts2TA= 25C, 2/ 9 All 16 ns 3/ 9, 10, 11 21 PE hold time th2TA= 25C, 2/ 9 All 0 ns 3/ 9, 10, 11 0 CEP or CET setup time ts3TA= 25C, 2/ 9 All 12 ns 3/ 9, 10, 11 16 CEP or CET hold time th3TA= 25C, 2/ 9 All 0 ns 3/ 9, 10, 11 0 1/ Not more than one output should be shorted at a time and the
37、 duration of the short circuit condition should not exceed one second. 2/ VCC= 5.0 V 3/ VCC= 4.5 V to 5.5 V Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-86727 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-399
38、0 REVISION LEVEL B SHEET 7 DSCC FORM 2234 APR 97 Device type 01 Case outlines E and F Terminal number Terminal symbol 1 MR 2 CP 3 P04 P15 P26 P37 CEP 8 GND 9 PE 10 CET 11 Q312 Q213 Q114 Q015 TC 16 VCCFIGURE 1. Terminal connections. Inputs Outputs CP MR PE CEP CET P0P1P2P3Q0Q1Q2Q3X L X X X X X X X L
39、L L L H L X X D0D1D2D3D0D1D2D3 H H L L X X X X NC NC NC NC H H L H X X X X NC NC NC NC H H H L X X X X NC NC NC NC H H H H X X X X Count H = High level X = Dont care L = Low level Di= May be either high or low NC = No change = LOW to HIGH transition FIGURE 2. Truth table. Provided by IHSNot for Resa
40、leNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-86727 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL B SHEET 8 DSCC FORM 2234 APR 97 FIGURE 3. Logic diagram. Provided by IHSNot for ResaleNo reproduction or networking pe
41、rmitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-86727 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL B SHEET 9 DSCC FORM 2234 APR 97 4. VERIFICATION 4.1 Sampling and inspection. Sampling and inspection procedures shall be in accordance with MIL-PRF-3853
42、5, appendix A. 4.2 Screening. Screening shall be in accordance with method 5004 of MIL-STD-883, and shall be conducted on all devices prior to quality conformance inspection. The following additional criteria shall apply: a. Burn-in test, method 1015 of MIL-STD-883. (1) Test condition A, B, C, or D.
43、 The test circuit shall be maintained by the manufacturer under document revision level control and shall be made available to the preparing or acquiring activity upon request. The test circuit shall specify the inputs, outputs, biases, and power dissipation, as applicable, in accordance with the in
44、tent specified in method 1015 of MIL-STD-883. (2) TA= +125C, minimum. b. Interim and final electrical test parameters shall be as specified in table II herein, except interim electrical parameter tests prior to burn-in are optional at the discretion of the manufacturer. TABLE II. Electrical test req
45、uirements. MIL-STD-883 test requirements Subgroups (in accordance with MIL-STD-883, method 5005, table I) Interim electrical parameters (method 5004) - Final electrical test parameters (method 5004) 1*, 2, 3, 7, 8, 9, 10, 11 Group A test requirements (method 5005) 1, 2, 3, 7, 8, 9, 10*, 11* Groups C
46、 and D end-point electrical parameters (method 5005) 1, 2, 3 * PDA applies to subgroup 1. * Subgroups 10 and 11, if not tested, shall be guaranteed to the specified limits in table I. 4.3 Quality conformance inspection. Quality conformance inspection shall be in accordance with method 5005 of MIL-ST
47、D-883 including groups A, B, C, and D inspections. The following additional criteria shall apply. 4.3.1 Group A inspection. a. Tests shall be as specified in table II herein. b. Subgroups 4, 5, and 6 in table I, method 5005 of MIL-STD-883 shall be omitted. C. Subgroups 7 and 8 shall include verifica
48、tion of the truth table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-86727 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL B SHEET 10 DSCC FORM 2234 APR 97 4.3.2 Groups C and D inspections. a. End-point electrical parameters shall be as specified in table II herein. b. Steady-state life test cond
