1、LTR A B THE ORIGINAL FIRST SHEET OF THIS DRAWING HAS BEEN REPLACED. DESCRIPTION DATE (YR-MO-DA) APPROVED Editorial changes throughout. Change to one part-one part number format. Add appendix. Change drawing to current requirements. Editorial changes throughout. - drw 92-1 1-04 M. A. Frye Raymond Mon
2、nin 04-09-24 -Ht SHEET PREPARED BY Joseph A. Kerby CHECKED BY Charies E. Besore APPROVEDBY Michael A. Frye DRAWING APPROVAL DATE 89-1 0-06 REVISION LEVEL B REV STATUS OF SHEETS DEFENSE SUPPLY CENTER COLUMBUS http:/www.dccc.dla.mil COLUMBUS, OHIO 43218-3990 MICROCIRCUIT, LINEAR, DUAL, SPDT ANALOG SWI
3、TCH, MONOLITHIC SILICON SIZE CAGE CODE A 67268 5962-89763 MIC NIA STANDARD MICROCIRCUIT DRAWING THIS DRAWING IS AVAILABLE FOR USE BY ALL DEPARTMENTS AND AGENCIES OF THE DEPARTMENT OF DEFENSE AMSC NIA ISCC FORM 2233 APR 97 5962-E433-04 Provided by IHSNot for ResaleNo reproduction or networking permit
4、ted without license from IHS-,-,-1. SCOPE STANDARD DEFENSE SUPPLY CENTER COLUMBUS MICROCIRCUIT DRAWING COLUMBUS, OHIO 43218-3990 1.1 Scope. This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M and space application (device class V). A choic
5、e of case outlines and lead finishes are available and are reflected in the Pari or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN. 1.2 m. The PIN is as shown in the following example: SIZE A 5962-89763 REVISION LEVEL SHEET 6
6、3 59r , 89763 7 7 4 Federal RHA Device Device Case Lead stock class designator type class outline finish designator (see 1.2.1) (see 1.2.2) designator (see 1.2.4) (see 1.2.5) I (see 1.2.3) V Drawing number 1.2.1 RHA desianator. Device classes Q and V RHA marked devices meet the MIL-PRF-38535 specifi
7、ed RHA levels and are marked with the appropriate RHA designator. Device class M RHA marked devices meet the MIL-PRF-38535, appendix A specified RHA levels and are marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device. 1.2.2 Device for case outline 2, 10 mW/“C. - 3/ Cross
8、talk performance is improved with case outline 2. DSCC FORM 2234 APR 97 - Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-3. REQUIREMENTS 3.1 Item requirements. The individual item requirements for device classes Q and V shall be in accordance with M
9、IL-PRF-38535 and as specified herein or as modified in the device manufacturets Quality Management (QM) plan. The modification in the QM plan shall not affect the form, fit, or function as described herein. The individual item requirements for device class M shall be in accordance with MIL-PRF-38535
10、, appendix A for non-JAN class level B devices and as specified herein. STANDARD MICROCIRCUIT DRAWING COLUMBUS, OHIO 4321 8-3990 DEFENSE SUPPLY CENTER COLUMBUS 3.2 Desian, construction. and Dhvsical dimensions. The design, construction, and physical dimensions shall be as specified in 3.2.1 Case out
11、lines. The case outlines shall be in accordance with 1.2.4 herein. 3.2.2 Terminal connections. The terminal connections shall be as specified on figure 1. 3.3 Electrical Derformance characteristics and Dostirradiation Darameter limits. Unless otherwise specified herein, the MIL-PRF-38535 and herein
12、for device classes Q and V or MIL-PRF-38535, appendix A and herein for device class M. electrical performance Characteristics and postirradiation parameter limits are as specified in table I and shall apply over the full ambient operating temperature range. 3.4 Electrical test requirements. The elec
13、trical test requirements shall be the subgroups specified in table II. The electrical tests for each subgroup are defined in table I. 3.5 Markinq. The part shall be marked with the PIN listed in 1.2 herein. In addition, the manufacturers PIN may also be marked. For packages where marking of the enti
14、re SMD PIN number is not feasible due to space limitations, the manufacturer has the option of not marking the “5962-“ on the device. For RHA product using this option, the RHA designator shall still be marked. Marking for device classes Q and V shall be in accordance with MIL-PRF-38535. Marking for
15、 device class M shall be in accordance with MIL-PRF-38535, appendix A. 3.5.1 Certification/compliance mark. The certification mark for device classes Q and V shall be a “QML“ or “Q“ as required in MIL-PRF-38535. The compliance mark for device class M shall be a “C“ as required in MIL-PRF-38535, appe
16、ndix A. 3.6 Certificate of cornpliance. For device classes Q and V, a certificate of compliance shall be required from a QML-38535 listed manufacturer in order to supply to the requirements of this drawing (see 6.6.1 herein). For device class M, a certificate of compliance shall be required from a m
17、anufacturer in order to be listed as an approved source of supply in MIL-HDBK-103 (see 6.6.2 herein). The certificate of compliance submitted to DSCC-VA prior to listing as an approved source of supply for this drawing shall affirm that the manufacturers product meets, for device classes Q and V, th
18、e requirements of MIL-PRF-38535 and herein or for device class M, the requirements of MIL-PRF-38535, appendix A and herein. 3.7 Certificate of conformance. A certificate of conformance as required for device classes Q and V in MIL-PRF-38535 or for device class M in MIL-PRF-38535, appendix A shall be
19、 provided with each lot of microcircuits delivered to this drawing. herein) involving devices acquired to this drawing is required for any change that affects this drawing. option to review the manufacturers facility and applicable required documentation. Offshore documentation shall be made availab
20、le onshore at the option of the reviewer. 3.8 Notification of chanqe for device class M. For device class M, notification to DSCC-VA of change of product (see 6.2 3.9 Verification and review for device class M. For device class M, DSCC, DSCCs agent, and the acquiring activity retain the 3.10 Microci
21、rcuit wouD assianment for device class M. Device class M devices covered by this drawing shall be in microcircuit group number 82 (see MIL-PRF-38535, appendix A). SIZE 5962-89763 A REVISION LEVEL SHEET B 4 DSCC FORM 2234 APR 97 Provided by IHSNot for ResaleNo reproduction or networking permitted wit
22、hout license from IHS-,-,-TABLE 1. Electrical performance characteristics. Conditions I/ -55C S TA S +I 25C UnleSS otherwise specified Symbol GroupA Device Limits Unit subgroups type Min I Max IIL 1,2 1,2 VIN under test = 0.8 V, all others = 24 V VIN under test = 2.4 V, all others = 0.8 V llH All I1
23、 .o PA All I1.0 VA bN FF 10, Il 275 V+=+13.5V, V-=-13.5V, 1 1 I All I I 35 1 Cl STANDARD MICROCIRCUIT DRAWING COLUMBUS, OHIO 4321 8-3990 DEFENSE SUPPLY CENTER COLUMBUS - I I SIZE 5962-89763 A REVISION LEVEL SHEET B 5 I 233 I I I 45 I Is = -10 rnA, VD = 110 V V+= +16.5V,V-=-16.5V, 1 1 I All I 3 I Cl
24、V+= +16.5V, V-=-16.5V, I 1 I V+ = 16.5 V, V- = -1 6.5 V, VD = +I 5.5 V, Vs = -1 5.5 V All 10.25 i0.25 nA V+ = +16.5V, V- = -16.5 V, I 1 I All I I 10.25 I nA I I V+ = 16.5 V, V- = -1 6.5 V, VD = +I 5.5 V, Vs = -1 5.5 V V+ = 16.5V, V-= -16.5V, I 1 I All 1 I 10.4 I nA I lo I I I 250 I l-k-l I 11 I I I
25、175 I OSCC FORM 2234 APR 97 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Conditions Il -55C 2 TA 2 +125“C Group A Device Limits Symbol unless otherwise specified subgmups type Test Min Max to RL = 300Q CL = 35 PF 9 All 10 150 Break-before-ma ke ti
26、me delay Positive supply current I+ V+ = 16.5 V, V- = -16.5 V, 1 All +1.0 23 +5.0 VIN = O V or 5.0 V Negative supply current I- V+ = 16.5 V, V- = -16.5 V, 1 All -1 .o 2, 3 -5.0 VIN = O V or 5.0 V Low supply current IL V+ = 16.5 V, V- = -16.5 V, 1 All +1.0 2,3 +5.0 VIN = O V or 5.0 V Ground current I
27、GND V+ = 16.5 V, V- = -16.5 V, 1 All -1 .o 2, 3 -5.0 VIN = O V or 5.0 V Unit ns pA PA pA PA - DSCC FORM 2234 APR 97 STANDARD MICROCIRCUIT DRAWING DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 SIZE 5962-89763 A REVISION LEVEL SHEET B 6 Provided by IHSNot for ResaleNo reproduction or networ
28、king permitted without license from IHS-,-,-1 Devicetype 1 o1 I FIGURE 1. Terminal connections. STANDARD MICROCIRCUIT DRAWING DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 4321 8-3990 1 5962-89763 I B I SHEET 7 I REVISION LEVEL DSCC FORM 2234 APR 97 Provided by IHSNot for ResaleNo reproduction or ne
29、tworking permitted without license from IHS-,-,-4. VERIFICATION 4.1 Samplinq and inspection. For device classes Q and V, sampling and inspection procedures shall be in accordance with MIL-PRF-38535 or as modified in the device manufacturers Quality Management (QM) plan. The modification in the QM pl
30、an shall not affect the form, fit, or function as described herein. For device class M, sampling and inspection procedures shall be in accordance with MIL-PRF-38535, appendix A. 4.2 Screeninq. For device classes Q and V, screening shall be in accordance with MIL-PRF-38535, and shall be conducted on
31、all devices prior to qualification and technology conformance inspection. For device class M, screening shall be in accordance with method 5004 of MIL-STD-883, and shall be conducted on all devices prior to quality conformance inspection. 4.2.1 Additional criteria for device class M. a. Burn-in test
32、, method 1015 of MIL-STD-883. (I) Test condition A or C. The test circuit shall be maintained by the manufacturer under document revision level control and shall be made available to the preparing or acquiring activity upon request. The test circuit shall specify the inputs, outputs, biases, and pow
33、er dissipation, as applicable, in accordance with the intent specified in method 1015. (2) TA = +125“C, minimum. Interim and final electrical test parameters shall be as specified in table II herein. b. 4.2.2 Additional critena for device classes Q and V. a. The burn-in test duration, test condition
34、 and test temperature, or approved alternatives shall be as specified in the device manufacturers QM plan in accordance with MIL-PRF-38535. The burn-in test circuit shall be maintained under document revision level control of the device manufacturers Technology Review Board (TRB) in accordance with
35、MIL-PRF-38535 and shall be made available to the acquiring or preparing activity upon request. The test circuit shall specify the inputs, outputs, biases, and power dissipation, as applicable, in accordance with the intent specified in method 1 O1 5 of MIL-STD-883. b. c. Interim and final electrical
36、 test parameters shall be as specified in table II herein. Additional screening for device class V beyond the requirements of device class Q shall be as specified in MIL-PRF-38535, appendix B. 4.3 Qualification inspection for device classes Q and V. Qualification inspection for device classes Q and
37、V shall be in accordance with MIL-PRF-38535. Inspections to be performed shall be those specified in MIL-PRF-38535 and herein for groups A, 6, C, D, and E inspections (see 4.4.1 through 4.4.4). 4.4 Conformance inspection. Technology conformance inspection for classes Q and V shall be in accordance w
38、ith MIL-PRF-38535 including groups A, B, C, D, and E inspections and as specified herein. Quality conformance inspection for device class M shall be in accordance with MIL-PRF-38535, appendix A and as specified herein. Inspections to be performed for device class M shall be those specified in method
39、 5005 of MIL-STD-883 and herein for groups A, B, C, D, and E inspections (see 4.4.1 through 4.4.4). STANDARD MICROCIRCUIT DRAWING DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 4321 8-3990 IA I 1 5962-89763 I SHEET 8 1 REVISION LEVEL B DSCC FORM 2234 APR 97 Provided by IHSNot for ResaleNo reproductio
40、n or networking permitted without license from IHS-,-,-4.4.1 Group A inspection. Tests shall be as specified in table II herein. TABLE II. Electrical test requirements. method 5005, table I) Device class M 1 Interim electrical parameters (see 4.2) I I Subgroups I Subgroups Device Device class Q clas
41、s V 1 I (in accordance with (in accordance with Test requirements I 1 MIL-STD-883. I MIL-PRF-38535. table 111) 11 1,2,3,9 Final electrical - parameters (see 4.2) - 11 1, 2, 3,9 11 1, 2, 3, 9 Group A test Group C end-point electrical Group D end-point electrical Group E end-point electrical requireme
42、nts (see 4.4) parameters (see 4.4) parameters (see 4.4) parameters (see 4.4) 21 1,2, 3,9, - 2! 1,2, 3, 9, 10,ll 10,ll - 21 1, 2, 3, 9, 10, Il 1 1 1 1 1 I _ _- -_ - 11 PDA applies to subgroup 1. - 21 Subgroups 10 and 11 if not tested shall be guaranteed to the limits specified in table I. STANDARD MI
43、CROCIRCUIT DRAWING COLUMBUS, OHIO 43218-3990 DEFENSE SUPPLY CENTER COLUMBUS 4.4.2 Group C inspection. The group C inspection end-point electrical parameters shall be as specified in table II herein. 4.4.2.1 Additional criteria for device class M. Steady-state life test conditions, method 1005 of MIL
44、-STD-883: a. Test condition A or C. The test circuit shall be maintained by the manufacturer under document revision level control and shall be made available to the preparing or acquiring activity upon request. The test circuit shall specify the inputs, outputs, biases, and power dissipation, as ap
45、plicable, in accordance with the intent specified in method 1005 of MIL- STD-883. SIZE 5962-89763 A REVISION LEVEL SHEET B 9 b. TA = +125“C, minimum. c. Test duration: 1,000 hours, except as permitted by method 1005 of MIL-STD-883. Provided by IHSNot for ResaleNo reproduction or networking permitted
46、 without license from IHS-,-,-4.4.2.2 Additional criteria for device classes Q and V. The steady-state life test duration, test condition and test temperature, Or approved alternatives shall be as specified in the device manufacturers QM plan in accordance with MIL-PRF-38535. The test circuit shall
47、be maintained under document revision level control by the device manufacturers TRB in accordance with MIL-PRF-38535 and shall be made available to the acquiring or preparing activity upon request. The test circuit shall specify the inputs, outputs, biases, and power dissipation, as applicable, in a
48、ccordance with the intent specified in method 1005 of MIL-STD, 883. STANDARD MICROCIRCUIT DRAWING COLUMBUS, OHIO 43218-3990 DEFENSE SUPPLY CENTER COLUMBUS 4.4.3 Group D inspection. The group D inspection end-point electrical parameters shall be as specified in table Il herein. 4.4.4 Group E inspecti
49、on. Group E inspection is required only for paris intended to be marked as radiation hardness assured (see 3.5 herein). SIZE 5962-89763 A REVISION LEVEL SHEET B IO a. End-point electrical parameters shall be as specified in table II herein. b. For device classes Q and V, the devices or test vehicle shall be subjected to radiation hardness assured tests as specified in MIL-PRF-38535 for the
