DOD A-A-54031-1989 INDICATOR STERILIZATION STEAM《蒸汽消毒指示器》.pdf

上传人:lawfemale396 文档编号:701705 上传时间:2019-01-01 格式:PDF 页数:4 大小:139.63KB
下载 相关 举报
DOD A-A-54031-1989 INDICATOR STERILIZATION STEAM《蒸汽消毒指示器》.pdf_第1页
第1页 / 共4页
DOD A-A-54031-1989 INDICATOR STERILIZATION STEAM《蒸汽消毒指示器》.pdf_第2页
第2页 / 共4页
DOD A-A-54031-1989 INDICATOR STERILIZATION STEAM《蒸汽消毒指示器》.pdf_第3页
第3页 / 共4页
DOD A-A-54031-1989 INDICATOR STERILIZATION STEAM《蒸汽消毒指示器》.pdf_第4页
第4页 / 共4页
亲,该文档总共4页,全部预览完了,如果喜欢就下载吧!
资源描述

1、A-A-5 40 3 1 24 November 1989 COMMERCIAL ITEM DESCRIPTION INDICATOR, STERILIZATION, STEAM The General Services Administration has authorized the use of this Commercial item Description. This Commercial Item Description covers a steam sterilization indicator strip. Salient characteristics: The steril

2、ization indicator strip shall provide visual indication of exposure to steam sterilization conditions by a distinctive color change on the strip. The indicator area shall change color when used as directed incide a surgical pack and sublected to stean at 250 F for 15 minutes or at 2700 F for 3 minut

3、es. Other tnan the color change, the entire indicator shall be totally unaffected by autoclaving conditions. Smudging, flaking, or any form of physical damage to the indicator shall De unaccegtable. Tne color change and original color must be distinctive enough for the end-user to easily differentia

4、te between gas or steam sterilization indicators. Indicator strips shall not be less than 6-1/2 inches long and 1/2 inch wide. Each strip shall be imprinted with instructions for use and for posicive determination of complete6 exposures. Workmanship. The steam sterilization indicator shall be free f

5、ror defect which detract from its appearance or impair its serviceability. Unit. PacKage (PG) . One package containing two hundred and fifty (250) ineicators, witr: Instruczion for use, as specified, ConsLitutes one unit. AMSC N/A FSC 6530 DISTRIBTION STATEMENT A. Approved for public release; distri

6、bution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A- 5 4 O 31 Quality Assurance Provisions. Responsibility for inspection. Unless otnerwise specified in the contract or purchase order, the contractor is responsible for the perfor

7、mance of all inspection requirements as Specified herein. Except as otherwise specified in the contract or purchase order, the contractor may use hic own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Governme

8、nt reserves the right to perform any of the inspections set forch in the specification wnere such inspections are deemed necessary to assure supplies and services conform to prescribed requirements. Records. Records of examinations and tests performed by or for the contractor shall be maintained by

9、the contractor and made available to the Government upon the Governments request, at any time, or from time to tirne, during the performance of the contract and for a period of three years after delivery of the supplies to which such records relate. Inspection. Inspection, as use nerein, is defined

10、as both examination (such as visual or auditory investlgation witnout the use of special laboratory appliances or procedures) and testing (determination by technical means of pnycical and chemical properties! of the item. Tests. Tests shall be conucte to determine compliance with specification requi

11、rements. Where feasible, the same sample shall be used for the determination of two or more test characteristics. Samplinq for examination. Sampling for examination shall be conuctec 11: accordance with MIL-STD-105, wrth an AQL of 2 (percent defective) and an Inspectior, level of S-2. The unit of pr

12、oduct for examination purposes shall be one package of 250 indicators, as specified in tnis description. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-54 O 3 1 Contractor certification. The contractor shall certify that the product offered me

13、ets the salient characteristics of this description and conforms to the producers own drawings, specifications, standards, and quality assurance practices. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for u

14、nder the provisions of the contract. Regulatory requirements. Federal Food, Drug and Cosmetic Act. If the product covered by this document has been derermined by the U.S. Food and Drug Administration to be under its jurisdiction, the offeror/contractor shall comply, and De responsible for compliance

15、 by its subcontractors/suppliers, with the requirements of the Federal Food, Drug and Cosmetic Act, as amended, and regulations promulgated thereunder. In addition, the offeror/contractor shall comply, and be responsible for compliance by its subcontractors/suppliers, with the requirements of all ot

16、her applicable Federal, State, and local statutes, ordinances, and regulations. Recovered materials. The offeror/contractor is encouraged to use recovered material in accordance with Public Law 94-580, as amended, and as implemented by Federal Acquisition Regulation Subpart 23.4 to the maximum exten

17、t practical. Preservation, packaging, packAng, labeling, and marking. Unless otnerwise specified, preservation, packaging, and packing shall be to a degree of protection to preclude damage to containezs and/or contents thereof under normal shipping conditions, handling, etc., involving shipment from

18、 the supply source to the receiving activity, plur resnipment from receiving activity, and shail coniorrr, to applicable carriers rules and regulations. Intermediate and exterioc package quantities and labeling and marking shall be as specified in the contract and/or order. N3TE: The foilowing Satio

19、nai Stack Number is covered by tnis ocument : 6530-00-074-7039 Orering data. nLermediate/exterior package quantities, labeling, and marking must be specified in the contract and/or order. 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-54031 MI

20、LITARY INTERESTS: PREPARING ACTIVITY: Custodians: Army - MD Navy - MS kir Force - 03 DD - MB Agent: DLA-DM CIVIL AGENCY COORDINATING ACTIVITIES: VA-OSS PHS FDA-MPQAS Project No. 6530-1932 Location: CID/INDICATOR/HlB-33 -1 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-

展开阅读全文
相关资源
猜你喜欢
  • AECMA PREN 2445-1997 Aerospace Series Steel FE-PL8201 (41NiCrMo2) Air Melted Hardened and Tempered Forgings De Less Than or Equal to 45 mm 900 MPa Less Than or Equal to Rm Less Tha.pdf AECMA PREN 2445-1997 Aerospace Series Steel FE-PL8201 (41NiCrMo2) Air Melted Hardened and Tempered Forgings De Less Than or Equal to 45 mm 900 MPa Less Than or Equal to Rm Less Tha.pdf
  • AECMA PREN 2446-1981 Steel FE-PL45 1100 MPa Less Than or Equal to Rm Less Than or Equal to 1300 MPa Bars De Less Than or Equal to 25 mm Aerospace Series Edition 1《航空航天系列FE-PL45 钢棒材.pdf AECMA PREN 2446-1981 Steel FE-PL45 1100 MPa Less Than or Equal to Rm Less Than or Equal to 1300 MPa Bars De Less Than or Equal to 25 mm Aerospace Series Edition 1《航空航天系列FE-PL45 钢棒材.pdf
  • AECMA PREN 2447-1981 Steel FE-PL45 1100 MPa Less Than or Equal to Rm Less Than or Equal to 1300 MPa Forgings De Less Than or Equal to 25 mm Aerospace Series Edition 1《航空航天系列FE-PL45.pdf AECMA PREN 2447-1981 Steel FE-PL45 1100 MPa Less Than or Equal to Rm Less Than or Equal to 1300 MPa Forgings De Less Than or Equal to 25 mm Aerospace Series Edition 1《航空航天系列FE-PL45.pdf
  • AECMA PREN 2448-1981 Steel FE-PL45 900 MPa Less Than or Equal to Rm Less Than or Equal to 1100 MPa Bars De Less Than or Equal to 40 mm Aerospace Series Edition 1《航空航天系列FE-PL45 钢棒材 .pdf AECMA PREN 2448-1981 Steel FE-PL45 900 MPa Less Than or Equal to Rm Less Than or Equal to 1100 MPa Bars De Less Than or Equal to 40 mm Aerospace Series Edition 1《航空航天系列FE-PL45 钢棒材 .pdf
  • AECMA PREN 2449-1981 Steel FE-PL45 900 MPa Less Than or Equal to Rm Less Than or Equal to 1100 MPa Forgings De Less Than or Equal to 40 mm Aerospace Series Edition 1《航空航天系列FE-PL45 .pdf AECMA PREN 2449-1981 Steel FE-PL45 900 MPa Less Than or Equal to Rm Less Than or Equal to 1100 MPa Forgings De Less Than or Equal to 40 mm Aerospace Series Edition 1《航空航天系列FE-PL45 .pdf
  • AECMA PREN 2450-1981 Steel FE-PL73 1230 MPa Less Than or Equal to Rm Less Than or Equal to 1420 MPa Bars De Less Than or Equal to 40 mm Aerospace Series Edition 1《航空航天系列FE-PL73钢棒材D.pdf AECMA PREN 2450-1981 Steel FE-PL73 1230 MPa Less Than or Equal to Rm Less Than or Equal to 1420 MPa Bars De Less Than or Equal to 40 mm Aerospace Series Edition 1《航空航天系列FE-PL73钢棒材D.pdf
  • AECMA PREN 2451-1981 Steel FE-PL73 1230 MPa Less Than or Equal to Rm Less Than or Equal to 1420 MPa Forgings De Less Than or Equal to 40 mm Aerospace Series Edition 1《航空航天系列FE-PL73.pdf AECMA PREN 2451-1981 Steel FE-PL73 1230 MPa Less Than or Equal to Rm Less Than or Equal to 1420 MPa Forgings De Less Than or Equal to 40 mm Aerospace Series Edition 1《航空航天系列FE-PL73.pdf
  • AECMA PREN 2452-1981 Steel FE-PL73 1080 MPa Less Than or Equal to Rm Less Than or Equal to 1280 MPa Bars De Less Than or Equal to 150 mm Aerospace Series Edition 1《航空航天系列FE-PL73钢棒材.pdf AECMA PREN 2452-1981 Steel FE-PL73 1080 MPa Less Than or Equal to Rm Less Than or Equal to 1280 MPa Bars De Less Than or Equal to 150 mm Aerospace Series Edition 1《航空航天系列FE-PL73钢棒材.pdf
  • AECMA PREN 2454-1981 Steel FE-PL73 880 MPa Less Than or Equal to Rm Less Than or Equal to 1080 MPa Bars De Less Than or Equal to 150 mm Aerospace Series Edition 1《航空航天系列FE-PL73 880.pdf AECMA PREN 2454-1981 Steel FE-PL73 880 MPa Less Than or Equal to Rm Less Than or Equal to 1080 MPa Bars De Less Than or Equal to 150 mm Aerospace Series Edition 1《航空航天系列FE-PL73 880.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1