1、A-A-54433 25 June leel COMMERCIAL ITEM DESCRI PT ION CAP, Ol?EHATIhJQ, GUHICAL The Ueneral Services Adm1nist.ration has authorized the use of this Commercial Item Description as a replacement for MIL-C-37015 which ig cancelled. This Commercial Item Description covers two styles of a disposable, hood
2、-type, universal cap with elastic neck closure, and tie tape neck closure suitable for one-time use by surgical team members. Salient Characteristics: The caps shall be disposable, universal size. surgical hoods with a face port and elasticized neck closure or tie tape neck closure. The caps shall b
3、e pastel shades of blue, green or grey and furnished in the following styles: Style A - Elastic Neck Closure Style B - Tie Tape Neck Closure Style A shall include overall nominal dimensions, when flattened, of 14 inches in height and a 5-1/2 inch face port. approximately 5 inches above the base line
4、. The elasticized, fully etretched neck opening shall tie at leagt 13-1/2 inches flat dimension. The machine direction of the fabric shall run in the vertical direction of the hood. There shall be no openings in the seanis. Style B shall have overall nominal dimensions. when flattened, of 11 inches
5、in height, 10 inchee in width at. the base, with a face port of 6-3/4 inches wide located approximately 1-3/4 inche6 above the base line. The deeign Ehall consist of two Eide panels, or equivalent, and a cpown, with the lower sectione of the side panels extended forward to form tie tapes approximate
6、ly 1-3/4 inches wide and 16 inches long, with the machine direction of the nonwoven fabric parallel to the tie extension direction. There Ehall be no openings in the seams. The cap shall be fabricated of a nonwoven fabric of rayon or AMSC N/A FSC 6332. DISTRIBUTION STATEMENT A! Approved-for public r
7、elease: distribution is unlimted. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-54433 b5 Yqqqq74 00b123 2 A-A-54433 comparable fibers and suitable bonding materials with a minimum weight of 31 grams per square yard. The nonwoven fabric shall be
8、 non-pilling, lint-free, noiseless, free of objectionable odors when wet. or dry, non-toxic arid non-irritating. The caps shall comply with NFPA BQ requirements for surface resist.ivity (static) and with NFPA 102, Class III for flame resistance. Workmanshk The disposable operating caps shall be free
9、 from defects which det.ract from their appearance or impair their serviceability. Unit. Package (Pa). ne package containing five hundred caps for style A or two hundred cape for style B. as specified, constitutes one unit. Quaiitv Assurance Provisions. Responsibility for inspection. Unless otherwis
10、e Epecified in the contract or purchase order. the contractor is responsible for the performance of all inspect.ion requirements as specified herein. Except as otherwise specified in the contract or purchaBe order, the contractor may uae hi8 own or any facilities Evitable for the performance of the
11、inspection requirements specified herein, unless disapproved by the overnment. The aovernment reserve8 the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to aasure eupplies and services conform to prescvibed requirements. Hecords. R
12、ecords of examinationa. and tests performed by or for the contractor shall be maintained by the contractor and made available to the Government upon the Governments request, at any time, or from time to time, during the performance of the contract and for a period of three yearg after delivery of th
13、e supplies to which such records relate. Inspection. Inspection, as used herein, is defined as both examination (such as visual or auditory investigat.ion without the use of special laboratory appliance8 OP procedures) and testing (determination by technical means of physical and chemical propertiee
14、l of the item. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-54433 b5 m 9999974 00bLB24 4 m A- A- 54433 Sampling for examination. Sampling for examination shall be conducted in accordance with MIL-STD-105, with an AQL of 1.0 (percent defective)
15、 and an inspection level of II. The unit of product for examination purposes shall be one package of operating caps. Sampling for tests. Sampling for tests, including dimensional test, shall be conducted in accordance with MIL-STD-105, with an AQL of 2.5 (percent defective) and an inspection level o
16、f S-l. The unit of product for test purposes shall be one package of operating caps. Tests. Tests shall be conducted to determine compliance with specification requirements. Where feasible, the same sample shall be used for the determination of two or more test characteristics. Tests shall include,
17、but =hall not be limited to, the following: 1. NFPA 09, for surface resistivity 2. NFFA 702, class III. for flame resistance M-ric! products. Products manufactured to metric dimensiona will Le considered on an equal basis with those manufactured using inch-pound units, providing they fall within the
18、 tolerances gpeclfled using conversion tab.les contained in the latest revision of Federal Standard 376. and all other requirements of I thie document are met. If a product is manufactured to metric dimenslona and thoge dimeneione exceed the tolerances specified in the inchipound unite, a request sh
19、ould be made to the contracting officer to determine if the product is acceptable. The contracting, officer has the option of accepting or rejecting the product. Contractor certification. The contractor shall certify that the product offered meets the salient characteristice of this deccription and
20、conforms to the producers own drawings, specifications, standards. and quality assurance practices. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the Contract. 3 Provided by IHSNo
21、t for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-54433 b5 9999974 00bL825 b D A-A-54433 Re du 1 at OP y. r e cru i r e men tsL Federal Food, Dru,g arid Cosmetic Act. If the product. covered bjr this doeument. has been determined by the U.S. Food and Drue Administr
22、ation to be under its jurisdiction, the of feror/contractor shall comply, and be responsi ble foi. compliance bv its subont.ractors/suylierE I with the requirements of the Federal Food, Drug and Cosmetic Act, as amended. and regulations promulgated thelaeurider. In addi tion, the offeror/cantractor
23、shall comply, and be reeponsible for compliance by its subcont.ractors/eupFliere, with the requirements of all other applicable Federal. State, and local statu te. ordinances and regulations. &covered materials. The offeror/contractor is encouraged to use recovered material in accordance with Federa
24、l Acquieition Regulation Subpart 23.4 1.0 the maximum extent practical. Preservation, Packaeing, p acking, labeline, and markine. Unless nt.herwise specified, preservation, packaging, and packing shall be to a degree of protection to preclude damage to containers and/or contents thereof under normal
25、 shipping conditions, handling, etc., involving shipment from the supply souice to the receiving activity, plus eshipment from receiving activity, and shall conform to applicable carriers rules and regulations. Intermediate and exterior package quantities and labeling and marking shall be as specifi
26、ed in the contract and/or order. Ordering data. Intermediate/exterior package quantities. labeling. and marking must be specified in the contrarit and/or order. NOTE: The following National Stock Numbers are covered by this document. 4 Provided by IHSNot for ResaleNo reproduction or networking permi
27、tted without license from IHS-,-,-A-A-54433 b5 9997974 00bL82b 8 A-A-5 4 4 33 MILITARY INTERESTS: Custodians: Army - MD Navy - MS Air Force - 03 PREPARINB ACTIVITY: DoD-ME Agent I DLA-DM CIVIL ACIENCY COORDINATINa ACTIVITIES: VA-OSS USPHS FDA - MP Q AS Project. Number: 65.52-1205 Location: CAPOFCID. 15E Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
