1、A-A-54588 65 M 9999974 00b3747 O M A-A-545 88 10 February 1992 COMMERCIAL ITEM DESCRIPTION SUPPORT, CERVICAL The General Services Administration has authorized the use of this Commercial Item Description This Commercial Item Description covers a universal size cervical collar. Salient Characteristic
2、s: The universal size cervical support shall be approximately 19-1/2 inches long and 3 inches wide, made of soft polyurethane foam material with a seamless, close fit stockinette covering. Each support shall have a hook and pile closure designed to permit application with only minimal movement of th
3、e patients head. The hook and pile fastener shall be securely sewn to the collar. Workmanship. The cervical support shall be free from defects which detract from its appearance or impair its serviceability. Unit. Each (EA). One cervical support, as specified, constitutes one unit. Quality Assurance
4、Provisions. a Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract or purchase order, the contractor may use his
5、 own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies
6、 and services conform to prescribed requirements. AMSC N/A FSC 6515 DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-54 5 8 8 Records. Records of examinations and te
7、sts performed by or for the contractor shall be maintained by the contractor and made available to the Government upon the Governments request, at any time, or from time to time, during the performance of the contract and for a period of three years after delivery of the supplies to which such recor
8、ds relate. Inspection. Inspection, as used herein, is defined as both examination (such as visual or auditory investigation without the use of special laboratory appliances or procedures) and testing (determination by technical means of physical and chemical properties) of the item. Samplinq for exa
9、mination. Sampling for examination shall be conducted in accordance with MIL-STD-105, with an AQL of 1.0 and an inspection level of II. The unit of product for examination purposes shall be one cervical support. Tests. Tests shall be conducted to determine compliance with specification requirements.
10、 Where feasible, the same sample shall be used for the determination of two or more test characteristics. Metric products. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured using inch-pound units, providing they fall within the tolerances specifi
11、ed using conversion tables contained in the latest revision of Federal Standard 376, and all other requirements of this document are met. If a product is manufactured to metric dimensions and those dimensions exceed the tolerances specified in the inch/pound units, a request should be made to the co
12、ntracting officer to determine if the product is acceptable. The contrac-Ling officer has the option of accepting or rejecting the product. Contractor certification. The contractor shall certify that the product offered meets the salient characteristics of this description and conforms to the produc
13、ers own drawings, specifications, standards, and quality assurance practices. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract. 2 I Provided by IHSNot for ResaleNo repro
14、duction or networking permitted without license from IHS-,-,-, A-A-54588 65 9999974 0063749 4 A-A-5 4 5 8 8 Requlatory requirements. e Federal Food, Druq and Cosmetic Act. If the product covered by this document has been determined by the U.S. Food and Drug Administration to be under its jurisdictio
15、n, the offeror/contractor shall comply, and be responsible for compliance by its subcontractors/suppliers, with the requirements of the Federal Food, Drug and Cosmetic Act, as amended, and regulations promulgated thereunder. In addition, the offeror/contractor shall comply, and be responsible for co
16、mpliance by its subcontractors/suppliers, with the requirements of all other applicable Federal, State, and local statutes, ordinances, and regulations. Recovered materials. The offeror/contractor is encouraged to use recovered material in accordance with Federal Acquisition Regulation Subpart 23.4
17、to the maximum extent practical. Preservation, packaqinq, p ackinq, labelinq, and markinq. Unless otherwise specified, preservation, packaging, and packing shall be to a degree of protection to preclude damage to containers and/or contents thereof under normal shipping conditions, handling, etc., in
18、volving shipment from the supply source to the receiving activity, plus reshipment from receiving activity, and shall conform to applicable carriers rules and regulations. Intermediate and exterior package quantities and labeling and marking shall be as specified in the contract and/or order. 0 Orde
19、rinq data. Intermediate/exterior package quantities, labeling, and marking must be specified in the contract and/or order. NOTE: The following National Stock Number is covered by this document. 6515-01-112-6410 MILITARY INTERESTS: PREPARING ACTIVITY: Custodians: DoD-MB Army - MD Agent: Navy - MS Air Force - 03 DLA-DM CIVIL AGENCY COORDINATING ACTIVITIES: VA - OSS USPHS FDA - MPQAS Project Number: 6515-5266 Location: CERVLC1A.DOC 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
