1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 12697-19:2012Bituminous mixtures Testmethods for hot mix asphaltPart 19: Permeability of specimenCopyright European Committee for Standardization Provided by IHS under lice
2、nse with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 12697-19:2012 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 12697-19:2012. It supersedes BS EN 12697-19:2004 which is withdrawn.The UK participation in its pre
3、paration was entrusted to Technical Committee B/510/1, Asphalt products.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct app
4、lication. The British Standards Institution 2012. Published by BSI Standards Limited 2012ISBN 978 0 580 75770 9 ICS 93.080.20 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy
5、Committee on 31 May 2012.Amendments issued since publicationDate T e x t a f f e c t e dCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 12697-19:2012EUROPEAN STANDARD NORME
6、 EUROPENNE EUROPISCHE NORM EN 12697-19 April 2012 ICS 93.080.20 Supersedes EN 12697-19:2004+A1:2007English Version Bituminous mixtures - Test methods for hot mix asphalt - Part 19: Permeability of specimen Mlanges bitumineux - Mthodes dessai pour mlange hydrocarbon chaud - Partie 19: Permabilit des
7、prouvettes Asphalt - Prfverfahren fr Heiasphalt - Teil 19: Durchlssigkeit der Probekrper This European Standard was approved by CEN on 26 February 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the stat
8、us of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, Ge
9、rman). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croat
10、ia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR ST
11、ANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12697-19:2012: ECopyright European Committee for
12、Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 12697-19:2012EN 12697-19:2012 (E) 2 Contents page Foreword 31 Scope 62 Normative references 63 Principle 64 Vertical permeability 64.1 General 64.2 Apparatus
13、 for vertical permeability .64.3 Procedure .74.4 Calculation 85 Horizontal permeability .95.1 General 95.2 Apparatus for horizontal permeability .95.3 Procedure 105.4 Calculation . 116 Test report . 126.1 General . 126.2 Information on specimen . 126.3 Information on the test and results . 127 Preci
14、sion 12Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 12697-19:2012EN 12697-19:2012 (E) 3 Foreword This document (EN 12697-19:2012) has been prepared by Technical Committe
15、e CEN/TC 227 “Road materials”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2012, and conflicting national standards shall be withdrawn at the l
16、atest by October 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12697-19:2004+A1:2007. The followin
17、g is a list of significant technical changes since the previous edition: clarification in the scope that the method is for bituminous mixtures with interconnecting voids; clarification of the requirements for the permeameters for both vertical and horizontal permeability; note added that the measuri
18、ng time can be decreased for large amounts of water for measuring both vertical and horizontal permeability; clarification that the typical value from the calculation of the horizontal permeability is only for when testing porous asphalt; additional item in test results on testing time, if less than
19、 60 s, for individual samples. This document is one of a series of standards as listed below: EN 12697-1, Bituminous mixtures Test methods for hot mix asphalt Part 1: Soluble binder content EN 12697-2, Bituminous mixtures Test methods for hot mix asphalt Part 2: Determination of particle size distri
20、bution EN 12697-3, Bituminous mixtures Test methods for hot mix asphalt Part 3: Bitumen recovery: Rotary evaporator EN 12697-4, Bituminous mixtures Test methods for hot mix asphalt Part 4: Bitumen recovery: Fractionating column EN 12697-5, Bituminous mixtures Test methods for hot mix asphalt Part 5:
21、 Determination of the maximum density EN 12697-6, Bituminous mixtures Test methods for hot mix asphalt Part 6: Determination of bulk density of bituminous specimens EN 12697-7, Bituminous mixtures Test methods for hot mix asphalt Part 7: Determination of bulk density of bituminous specimens by gamma
22、 rays EN 12697-8, Bituminous mixtures Test methods for hot mix asphalt Part 8: Determination of void characteristics of bituminous specimens Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license fr
23、om IHS-,-,-BS EN 12697-19:2012EN 12697-19:2012 (E) 4 EN 12697-10, Bituminous mixtures Test methods for hot mix asphalt Part 10: Compactibility EN 12697-11, Bituminous mixtures Test methods for hot mix asphalt Part 11: Determination of the affinity between aggregate and bitumen EN 12697-12, Bituminou
24、s mixtures Test methods for hot mix asphalt Part 12: Determination of the water sensitivity of bituminous specimens EN 12697-13, Bituminous mixtures Test methods for hot mix asphalt Part 13: Temperature measurement EN 12697-14, Bituminous mixtures Test methods for hot mix asphalt Part 14: Water cont
25、ent EN 12697-15, Bituminous mixtures Test methods for hot mix asphalt Part 15: Determination of the segregation sensitivity EN 12697-16, Bituminous mixtures Test methods for hot mix asphalt Part 16: Abrasion by studded tyres EN 12697-17, Bituminous mixtures Test methods for hot mix asphalt Part 17:
26、Particle loss of porous asphalt specimen EN 12697-18, Bituminous mixtures Test methods for hot mix asphalt Part 18: Binder drainage EN 12697-19, Bituminous mixtures Test methods for hot mix asphalt Part 19: Permeability of specimen EN 12697-20, Bituminous mixtures Test methods for hot mix asphalt Pa
27、rt 20: Indentation using cube or cylindrical specimens EN 12697-21, Bituminous mixtures Test methods for hot mix asphalt Part 21: Indentation using plate specimens EN 12697-22, Bituminous mixtures Test methods for hot mix asphalt Part 22: Wheel tracking EN 12697-23, Bituminous mixtures Test methods
28、for hot mix asphalt Part 23: Determination of the indirect tensile strength of bituminous specimens EN 12697-24, Bituminous mixtures Test methods for hot mix asphalt Part 24: Resistance to fatigue EN 12697-25, Bituminous mixtures Test methods for hot mix asphalt Part 25: Cyclic compression test EN 1
29、2697-26, Bituminous mixtures Test methods for hot mix asphalt Part 26: Stiffness EN 12697-27, Bituminous mixtures Test methods for hot mix asphalt Part 27: Sampling EN 12697-28, Bituminous mixtures Test methods for hot mix asphalt Part 28: Preparation of samples for determining binder content, water
30、 content and grading EN 12697-29, Bituminous mixtures Test method for hot mix asphalt Part 29: Determination of the dimensions of a bituminous specimen EN 12697-30, Bituminous mixtures Test methods for hot mix asphalt Part 30: Specimen preparation by impact compactor EN 12697-31, Bituminous mixtures
31、 Test methods for hot mix asphalt Part 31: Specimen preparation by gyratory compactor EN 12697-32, Bituminous mixtures Test methods for hot mix asphalt Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor Copyright European Committee for Standardization Provided by IHS under
32、license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 12697-19:2012EN 12697-19:2012 (E) 5 EN 12697-33, Bituminous mixtures Test methods for hot mix asphalt Part 33: Specimen prepared by roller compactor EN 12697-34, Bituminous mixtures Test methods
33、for hot mix asphalt Part 34: Marshall test EN 12697-35, Bituminous mixtures Test methods for hot mix asphalt Part 35: Laboratory mixing EN 12697-36, Bituminous mixtures Test methods for hot mix asphalt Part 36: Determination of the thickness of a bituminous pavement EN 12697-37, Bituminous mixtures
34、Test methods for hot mix asphalt Part 37: Hot sand test for the adhesivity of binder on precoated chippings for HRA EN 12697-38, Bituminous mixtures Test methods for hot mix asphalt Part 38: Common equipment and calibration EN 12697-39, Bituminous mixtures Test methods for hot mix asphalt Part 39: B
35、inder content by ignition EN 12697-40, Bituminous mixtures Test methods for hot mix asphalt Part 40: In situ drainability EN 12697-41, Bituminous mixtures Test methods for hot mix asphalt Part 41: Resistance to de-icing fluids EN 12697-42, Bituminous mixtures Test methods for hot mix asphalt Part 42
36、: Amount of coarse foreign matters in reclaimed asphalt EN 12697-43, Bituminous mixtures Test methods for hot mix asphalt Part 43: Resistance to fuel EN 12697-44, Bituminous mixtures Test methods for hot mix asphalt Part 44: Crack propagation by semi-circular bending test EN 12697-45, Bituminous mix
37、tures Test methods for hot mix asphalt Part 45: Saturation ageing tensile stiffness (SATS) conditioning test EN 12697-46, Bituminous mixtures Test methods for hot mix asphalt Part 46: Low temperature cracking and properties by uniaxial tension tests EN 12697-47, Bituminous mixtures Test methods for
38、hot mix asphalt Part 47: Determination of the ash content of natural asphalt prEN 12697-48, Bituminous mixtures Test methods for hot mix asphalt Part 48: Inter-layer bond strength1)prEN 12697-49, Bituminous mixtures Test methods for hot mix asphalt Part 49: Determination of friction after polishing1
39、)prEN 12697-50, Bituminous mixtures Test methods for hot mix asphalt Part 50: Scuffing resistance of surface course1)According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bul
40、garia, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. 1) In pre
41、paration Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 12697-19:2012EN 12697-19:2012 (E) 6 1 Scope This European Standard specifies a method for determining the vertical
42、and horizontal permeability of cylindrical specimens of bituminous mixtures with interconnecting voids. The standard applies to specimens cored out of the road, specimens from laboratory made slabs or laboratory specimens prepared with a compaction device provided the thickness of the specimen is no
43、t less than twice the nominal maximum particle size of the aggregate in the mixture. The nominal diameter of specimens should be either 100 mm or 150 mm unless the nominal maximum particle size of the aggregate size exceeds 22 mm, when the nominal diameter is 150 mm. 2 Normative references The follo
44、wing documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12697-29, Bit
45、uminous mixtures Test methods for hot mix asphalt Part 29: Determination of the dimensions of a bituminous specimen 3 Principle A column of water with a constant height is applied to a cylindrical specimen and is allowed to permeate through the specimen for a controlled time in either a vertical or
46、horizontal direction depending upon the parameter being measured. The resultant flow rate of the water Qvor Qhis a calculated measure of the permeability value Kvor Kh. The test is carried out at ambient temperature. NOTE When the void content of the same specimen is determined, the relationship bet
47、ween permeability and void content can be established. 4 Vertical permeability 4.1 General In this method, only the water flow in a vertical direction through the specimen is measured. 4.2 Apparatus for vertical permeability 4.2.1 Apparatus as shown in Figure 1. The dimensions shall be such so as to
48、 ensure the water column height is (300 1) mm. The external diameter of the tube and any fittings shall be such that no water can flow between the wall of the tube and the specimen when in place; the thickness of the tube shall be sufficient to ensure it retains its shape but shall not be more than 5 mm. NOTE 1 The external diameter of the tube should generally be greater than th
