1、BRITISH STANDARD BS EN 12958:2000 Incorporating Amendment No. 1 Footwear Test methods for shanks Fatigue resistance The European Standard EN 12958:2000, with the incorporation of amendment A1:2004, has the status of a British Standard ICS 61.060 BS EN 12958:2000 This British Standard, having been pr
2、epared under the direction of the Sector Committee for Materials and Chemicals, was published under the authority of the Standards Committee and comes into effect on 15 May 2000 BSI 6 July 2004 ISBN 0 580 34280 8 National foreword This British Standard is the official English language version of EN
3、12958:2000, including amendment A1:2004. The UK participation in its preparation was entrusted to Technical Committee TCI/69, Footwear and leather, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The
4、 British Standards which implement international publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. Th
5、is publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible int
6、ernational/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN
7、 title page, pages 2 to 5 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments 15048 6 July 2004 Replacement of text in Clause 1EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM E
8、N 12958 February 2000 + A1 May 2004 ICS 61.060 English version Footwear Test methods for shanks Fatigue resistance (includes amendment A1:2004) Chaussures Mthodes dessai pour cambrions Rsistance la fatigue (inclut lamendement A1:2004) Schube Prfverfahren fr Gelenke Ermdungswiderstand (enthlt nderung
9、 A1:2004) This European Standard was approved by CEN on 1 January 2000; Amendment A1 was approved by CEN on 2 March 2004. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard witho
10、ut any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language ma
11、de by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany
12、, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central
13、 Secretariat: rue de Stassart 36, B-1050 Brussels 2000 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members Ref. No. EN 12958:2000 + A1:2004 EEN 12958:2000 BSI 6 July 2004 2 Foreword This European Standard has been prepared by Technical Committee CE
14、N/TC 309, Footwear, the Secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2000, and conflicting national standards shall be withdrawn at the latest by A
15、ugust 2000. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands,
16、 Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Foreword to amendment A1 This document (EN 12958:2000/A1:2004) has been prepared by Technical Committee CEN/TC 309, Footwear, the Secretariat of which is held by AENOR. This amendment to the European Standard EN 12958:2000/A1:2004
17、 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2004, and conflicting national standards shall be withdrawn at the latest by November 2004. According to the CEN/CENELEC Internal Regulations, the national stand
18、ards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Sl
19、ovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Contents Page Foreword 2 1S c o p e 3 2 Normative references 3 3 Definitions 3 4 Apparatus and materials 3 5 Sampling and conditioning 3 6 Test method 4 7 Expression of results 4 8 Test report 4EN 12958:2000 BSI 6 July 2004 3 1 Sco
20、pe This European Standard specifies a test method for assessing the fatigue resistance of steel shanks of at least 100 mm in length used for the reinforcement of the waist region of womens shoes and of some mens and childrens shoes. NOTE Steel shanks below 100 mm in length cannot be reliably tested
21、by this method. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendme
22、nts to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. for undated references the latest edition of the publication referred to applies. EN 12222, Footwear Standard atmospheres for conditioning and testing of footwear a
23、nd components for footwear. 3 Definitions For the purposes of this standard the following definition applies. 3.1 fatigue resistance the resistance of a shank, under specified conditions, to repeated loading cycles 4 Apparatus and materials A test machine shall be used to measure the fatigue resista
24、nce of steel shanks. For multi station machines each station shall include the items described in a) to d). a) A fixed lower jaw with flat hardened steel face plates of height 32 mm 2 mm and of width suitable to securely clamp the shank. b) An adjustable upper jaw with flat hardened steel face plate
25、s with a means of exerting a force of 49 N 2 N on the shank perpendicular to the plane of the lower clamp faces at a rate of four cycles per second. One complete cycle being the application of the load in a forward and reverse direction as in a simple harmonic motion. An illustration of suitable upp
26、er and lower jaw configuration is given in Figure 1. c) A method of counting the number of complete cycles up to break of the specimen. d) A method of controlling the clamping force of the jaws see items a) and b), to 4 900 N mm 50 N mm. NOTE A torque wrench is suitable. 5 Sampling and conditioning
27、The test specimen shall be a complete shank. At least four samples of each type of shank shall be tested. Condition samples for 48 h prior to testing in a controlled atmosphere in accordance with EN 12222. Tests shall be carried out in a suitable conditioned atmosphere in accordance with EN 12222, o
28、r, where this is not possible tests shall be carried out within 15 minutes of removing the test specimen from the conditioned atmosphere.EN 12958:2000 4 BSI 6 July 2004 6 Test method The shank is clamped at its rear end as it would be in a shoe and bent as a cantilever beam by an alternating force a
29、pplied to the shank. The number of loading cycles required to break the shank is termed the fatigue life. Insert the heel end of the shank centrally in the lower jaw see 4a) so that 32 mm of shank are clamped with the end of the shank level with the bottom edge of the jaw and the specimen is perpend
30、icular to the clamping forces of the lower jaw. Close and tighten the lower jaw see 4a) ensuring that the torque exerted at the upper edge of the jaw is 4 900 N mm by using a device according to 4d). Such a high torque does not need to be applied to the lower edge of the clamp, but apply sufficient
31、to ensure that the lower edge is secure and that the faces of the jaws remain parallel. Place the upper jaw see 4b) on the specimen so that the distance between the top edge of the lower clamp see 4a) and the centre of the upper jaw see 4b) is 70 mm 2 mm. Uniformly close and tighten the upper jaw se
32、e 4b) ensuring that the total torque exerted is 4 900 N mm see 4d). 7 Expression of results Operate the testing machine and record the total number of load cycles as each specimen breaks. For each specimen report the total number of load cycles to break and calculate the arithmetic mean of the four
33、results. 8 Test report The test report shall include the following information: a) results, expressed in accordance with Clause 7; b) reference to this test method; c) full description of the samples tested including commercial styles codes, colours, nature, etc.; d) the number of test specimens if
34、other than four; e) any deviations from this standard method; f) date of testing.EN 12958:2000 BSI 6 July 2004 5 Figure 1BS EN 12958:2000 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It pr
35、esents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of
36、BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20
37、 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Cust
38、omer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British
39、 Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give detai
40、ls on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of th
41、ese and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the
42、BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in
43、 a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.
