1、BRITISH STANDARDBS EN 14035-15:2003IncorporatingCorrigendum No. 1Fireworks Part 15: Fountains Specification and test methodsThe European Standard EN 14035-15:2003 has the status of a British StandardICS 71.100.30g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g4
2、4g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 14035-15:2003This British Standard was published under the authority of the Standards Policy and Strategy Committee on 8 August 2003 BSI 14 March 2006ISBN 0 580 42423 5National forew
3、ordThis British Standard is the official English language version of EN 14035-15:2003, including Corrigendum January 2005. It partially supersedes BS 7114-2:1988 and BS 7114-3:1988 which have been declared obsolescent.NOTE BS 7114-2:1988 and BS 7114-3:1988 are cited in The Fireworks (Safety) Regulat
4、ions 1997.The UK participation in its preparation was entrusted to Technical Committee CII/47, Fireworks, which has the responsibility to: aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK
5、 interests informed; monitor related international and European developments and promulgate them in the UK.A list of organizations represented on this committee can be obtained on request to its secretary.Additional information The United Kingdom, as a member of CEN, is obliged to publishEN 14035-15
6、:2003 as a British Standard and to incorporate the corrigendum EN 14035-15/AC:2005. However, attention is drawn to the fact that the United Kingdom voted against the approval of the draft corrigendum.The main reason for this disapproval is that BSI Committee CII/47 considers that Figure 2 in 8.8, as
7、 changed by the corrigendum, is still inaccurate because various elements of the figure are too small. The BSI Committee recommends that if a transparent template is used to check type sizes on labelling, the template should be accurately produced so that the height of each character and symbol on t
8、he template is within +0.10mm of the relevant minimum height specified in this standard. Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogueunder the section entitled “International Standards Corr
9、espondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard does not o
10、f itself confer immunity from legal obligations.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 35 and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publ
11、icationAmd. No. Date Comments15918 Corrigendum No. 1March 2006 Addition to the national foreword and implementation of CEN corrigendum January 2005 (indicated by sideline)EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 14035-15May 2003ICS 71.100.30 Incorporating corrigendum January 2005English ver
12、sionFireworks - Part 15: Fountains - Specification and test methodsArtifices de divertissement - Partie 15: Fontaines -Spcifications et mthodes dessaiFeuerwerkskrper - Teil 15: Fontnen - Anforderungen undPrfverfahrenThis European Standard was approved by CEN on 7 November 2002.CEN members are bound
13、to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Manage
14、ment Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the offi
15、cialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR
16、STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2003 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14035-15:2003 EContentspageForeword31 Scope 52 Nor
17、mative references 53 Terms and definitions64 Construction.64.1 Means of ignition .64.2 Attachment of initial fuse (outdoor fountains only) .64.3 Protection of initial fuse 64.4 Materials of firework case .74.5 Integrity.74.6 Net explosive content74.7 Vertical stability75 Performance .75.1 Indoor fou
18、ntains.75.2 Initial fuses (outdoor fountains only).85.3 Principal effects .85.4 Functioning.85.5 Explosions and other failures.85.6 Height of effects and burning matter (indoor fountains only) 85.7 Burning matter (outdoor fountains only).85.8 Stability .86 Primary pack or selection pack.87 Minimum l
19、abelling requirements97.1 General97.2 Type name and category.97.3 Safety information97.4 Name, address and telephone number of manufacturer or distributor or importer .117.5 Reference to this standard117.6 Printing117.7 Marking of very small fountains.117.8 Additional information on the primary pack
20、 (if applicable).128 Test methods128.1 Attachment of protruding fuse (type test and batch test) .128.2 Attachment of sealing paper and ignition head (type test) .128.3 Vertical stability test (type test)138.4 Performance of indoor fountains (type test and batch test) .138.5 Performance of outdoor fo
21、untains (type test and batch test).148.6 Determination of net explosive content (type test) 158.7 Side ignition of initial fuse (type test)158.8 Labelling (type test and batch test)17Annex A (normative) Type testing18Annex B (normative) Batch testing 27Annex C (normative) Specification for test pape
22、r.31Annex D (normative) Method for determination of smouldering rate of cigarette 33Annex E (informative) A-Deviations35Page 2EN 1403515:2003ForewordThis document (EN 14035-15:2003) has been prepared by Technical Committee CEN/TC 212 “Fireworks”, thesecretariat of which is held by NEN.This European
23、Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by November 2003, and conflicting national standards shall be withdrawn at the latestby November 2003.This European Standard is one of a series of standards as listed
24、 below.EN 14035-1, Fireworks - Part 1: Terminology.EN 14035-2, Fireworks - Part 2: Categorisation.prEN 14035-3, Fireworks - Part 3: Aerial wheels - Specification and test methods.EN 14035-4, Fireworks - Part 4: Bangers and banger batteries - Specification and test methods.prEN 14035-6, Fireworks - P
25、art 6: Bengal flames - Specification and test methods.prEN 14035-7, Fireworks - Part 7: Bengal matches - Specification and test methods.prEN 14035-8, Fireworks - Part 8: Bengal sticks - Specification and test methods.prEN 14035-9, Fireworks - Part 9: Crackling granules - Specification and test metho
26、ds.prEN 14035-10, Fireworks - Part 10: Double bangers - Specification and test methods.EN 14035-12, Fireworks - Part 12: Flash bangers and flash banger batteries - Specification and test methods.prEN 14035-13, Fireworks - Part 13: Flash pellets - Specification and test methods.EN 14035-15, Fireworks
27、 - Part 15: Fountains - Specification and test methods.prEN 14035-17, Fireworks - Part 17: Ground spinners - Specification and test methods.prEN 14035-18, Fireworks - Part 18: Hand-held fountains - Specification and test methods.EN 14035-19, Fireworks - Part 19: Hand-held sparklers - Specification a
28、nd test methods.prEN 14035-20, Fireworks - Part 20: Jumping crackers - Specification and test methods.prEN 14035-21, Fireworks - Part 21: Jumping ground spinners - Specification and test methods.prEN 14035-22, Fireworks - Part 22: Mines - Specification and test methods.EN 14035-23, Fireworks - Part
29、23: Non-hand-held sparklers - Specification and test methods.prEN 14035-24, Fireworks - Part 24: Novelty matches - Specification and test methods.prEN 14035-25, Fireworks - Part 25: Party poppers - Specification and test methods.Page 3EN 1403515:2003prEN 14035-5, Fireworks Part 5: Batteries and comb
30、inations Specification and test methods.EN 14035-27, Fireworks - Part 27: Rockets - Specification and test methods.prEN 14035-28, Fireworks - Part 28: Roman candles - Specification and test methods.prEN 14035-29, Fireworks - Part 29: Serpents - Specification and test methods.prEN 14035-33, Fireworks
31、 - Part 33: Spinners - Specification and test methods.EN 14035-34, Fireworks - Part 34: Table bombs - Specification and test methods.prEN 14035-35, Fireworks - Part 35: Throwdowns - Specification and test methods.prEN 14035-36, Fireworks - Part 36: Wheels - Specification and test methods.prEN 14035-
32、37, Fireworks - Part 37: Whistlers - Specification and test methods.In this European Standard the annexes A to D are normative and the annex E is informative and contains nationaldeviations due to regulations, the alteration of which is for the time being outside the competence of theCEN/CENELEC mem
33、ber.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Nether
34、lands, Norway, Portugal,Slovakia, Spain, Sweden, Switzerland and the United Kingdom.Page 4EN 1403515:2003prEN 14035-31, Fireworks Part 31: Shell-in-mortars Specification and test methods. prEN 14035-38, Fireworks Part 38: Shot tubes Specification and test methods.1 ScopeThis European Standard specif
35、ies requirements for the construction, performance, primary packaging and labellingof fountains and the corresponding test methods. It is applicable to indoor fireworks which are classified asfountains in category 1 in EN 14035-2 and in which the pyrotechnic composition is based on nitrocellulose wi
36、th amass fraction of nitrogen of not more than 12,6 %.It is applicable to outdoor fireworks which are classified as fountains in categories 1, 2 and 3 in EN 14035-2.It is not applicable to fountains containing pyrotechnic composition which includes any of the following substances: arsenic or arsenic
37、 compounds; mixtures containing a mass fraction of chlorates greater than 80 %; mixtures of chlorates with metals; mixtures of chlorates with red phosphorus; mixtures of chlorates with potassium hexacyanoferrate(II); mixtures of chlorates with sulfur; mixtures of chlorates with sulfides; lead or lea
38、d compounds; mercury compounds; white phosphorus; picrates or picric acid; potassium chlorate with a mass fraction of bromates greater than 0,15 %; sulfur with an acidity, expressed in mass fraction of sulphuric acid, greater than 0,002 %; zirconium with a particle size of less than 40 m.NOTE In EN
39、14035-2, fountains are classified as follows: brief description: non-metallic case containing sparks- and flame-producing pyrotechnic composition and designed to beplaced on the ground, or to be fixed in the ground, or to be fixed to a support; principal effects: emission of sparks and flames with a
40、ural effect other than report or without any aural effect.Schemes for type testing of fountains and batch testing of fountains are specified in annex A and annex Brespectively.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications.
41、 Thesenormative references are cited at the appropriate places in the text, and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For und
42、ated references the latest edition of thepublication referred to applies (including amendments).EN 14035-1:2003, Fireworks Part 1: Terminology.Page 5EN 1403515:2003EN 14035-2, Fireworks Part 2: Categorisation.EN 20187, Paper, board and pulps - Standard atmosphere for conditioning and testing and pro
43、cedure formonitoring the atmosphere and conditioning of samples (ISO 187:1990).EN ISO 536, Paper and board Determination of grammage (ISO 536:1995).EN ISO 845, Cellular plastics and rubbers Determination of apparent (bulk) density (ISO 845:1988).EN ISO 868, Plastics and ebonite Determination of inde
44、ntation hardness by means of a durometer (ShoreHardness) (ISO 868:1985).Flexible cellular polymeric materials Determination of hardness (indentation technique) (includingTechnical Corrigendum 1:2001).ISO 2859-1, Sampling procedures for inspection by attributes Part 1: Sampling schemes indexed by acc
45、eptancequality limit (AQL) for lot-by-lot inspection.3 Terms and definitionsFor the purposes of this European Standard, the terms and definitions given in EN 14035-1 apply.4 Construction4.1 Means of ignitionThe means of ignition shall be identified by a protruding fuse, a sealing paper or an ignitio
46、n head.Conformity to this requirement shall be verified by visual examination.4.2 Attachment of initial fuse (outdoor fountains only)NOTE Category 1 indoor fountains do not usually have an initial fuse (producing the principal effects immediately afterignition).For fountains with protruding fuse, th
47、e attachment of the protruding fuse to the fountain shall be secure when testedin accordance with 8.1.For fountains with sealing paper or ignition head, the attachment of the sealing paper or ignition head to thefountain shall be secure when tested in accordance with 8.2.4.3 Protection of initial fu
48、se4.3.1 GeneralThe initial fuse shall be protected in one of the ways specified in 4.3.2, 4.3.3 or 4.3.4.4.3.2 Initial fuse protected by fuse coverAn orange fuse cover shall be in place over the initial fuse.Conformity to this requirement shall be verified by visual examination.Page 6EN 1403515:2003
49、EN-ISO 2439 ,4.3.3Conformity to this requirement shall be verified by visual examination.4.3.4 Protruding fuse designed to resist side ignitionWhen tested in accordance with 8.7, the protruding fuse shall not ignite.4.4 Materials of firework caseThe body of the firework case shall be made of paper, cardboard or plastics. The base and/or means of fixing shallbe made of non-metallic material.Conformity to these requirements shall be verified by visual examination.4.5 Integrity4.5.1 Fire
