1、BRITISH STANDARDBS EN 1870-13:2007+Safety of woodworking machines Circular sawing machines Part 13: Horizontal beam panel sawing machinesICS 79.120.10g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g
2、39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58A2:2012National forewordThis British Standard is the UK implementation of EN 1870-13:2007+A2:2012. It supersedes BS EN 1870-13:2007+A1:2009 which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by
3、 tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“.The UK participation in its preparation was entrusted to Technical Committee MTE/23, Woodworking machines.A list of organizations represented on this com
4、mittee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.BS EN 1870-13:2007+A2:2012Thi
5、s British Standard waspublished under the authorityof the Standards Policy andStrategy Committee on31 January 2008 The British Standards Institution 2012. Published by BSI Standards Limited 2012.Amendments/corrigenda issued since publicationDate Comments 30 June 2008 Supersession details updated in
6、national foreword31 December 2009 Implementation of CEN amendment A1:200930 April 2012 Implementation of CEN amendment A2:2012ISBN 978 0 580 72230 1EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1870-13:2007+A2 March 2012 ICS 79.120.10 Supersedes EN 1870-13:2007+A1:2009English Version Safety o
7、f woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machines Scurit des machines pour le travail du bois - Machines scie circulaire - Partie 13: Scies panneaux horizontales presseur Sicherheit von Holzbearbeitungsmaschinen - Kreissgemaschinen - Teil 13: Horizont
8、ale Plattenkreissgemaschinen mit Druckbalken This European Standard was approved by CEN on 21 October 2007 and includes Amendment 1 approved by CEN on 13 August 2009 and Amendment 2 approved by CEN on 30 January 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which st
9、ipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This Europea
10、n Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are t
11、he national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden,
12、Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membe
13、rs. Ref. No. EN 1870-13:2007+A2:2012: EEN 1870-13:2007+A2:2012 (E) 2 Contents Page Foreword 4Introduction .61 Scope 72 Normative references 83 Terms and definitions 103.1 #General$ 103.2 #Definitions$ . 104 List of significant hazards . 175 Safety requirements and / or measures . 205.1 General . 205
14、.2 Controls . 205.2.1 Safety and reliability of control systems 205.2.2 Position of controls 215.2.3 Starting 215.2.4 Normal stopping . 225.2.5 Emergency stop 235.2.6 Pressure beam control . 245.2.7 #Speed control$ . 245.2.8 Failure of the power supply . 245.2.9 Failure of the control circuits 255.3
15、 Protection against mechanical hazards . 255.3.1 Stability 255.3.2 Hazard resulting from break-up during operation . 255.3.3 Tool holder and tool design . 265.3.4 Braking . 265.3.5 Workpiece supports and guides . 275.3.6 Prevention of access to moving parts 285.3.7 Guarding of drives 395.4 Protectio
16、n against non-mechanical hazards . 405.4.1 Fire . 405.4.2 Noise 405.4.3 Emission of chips and dust . 415.4.4 Electricity . 425.4.5 Ergonomics and handling 425.4.6 Pneumatics 435.4.7 Electromagnetic compatibility . 435.4.8 Static electricity 435.4.9 Errors of fitting 435.4.10 Laser 445.4.11 Supply di
17、sconnection (isolation) 445.4.12 Maintenance 446 Information for use . 456.1 Warning devices . 456.2 Marking 456.3 Instruction handbook . 46Annex A (normative) Impact test method for guards . 52A.1 General . 52A.2 Test method . 52A.2.1 Preliminary remarks . 52BS EN 1870-13:2007+A2:2012EN 1870-13:200
18、7+A2:2012 (E) 3 A.2.2 Testing equipment . 52A.2.3 Projectile for guards 52A.2.4 Sampling. 52A.2.5 Test procedure . 52A.3 Results 53A.4 Assessment . 53A.5 Test report 53A.6 Test equipment for impact test 53Annex B (normative) Saw spindle dimensional tolerances 55Annex C (normative) Rigidity test for
19、sectional safety curtain material . 56Annex D (normative) Braking tests . 58D.1 Conditions for all tests 58D.2 Tests . 58D.2.1 Un-braked run-down time . 58D.2.2 Braked run-down time . 58Annex ZA (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive
20、 2006/42/EC$ 61Bibliography 65BS EN 1870-13:2007+A2:2012EN 1870-13:2007+A2:2012 (E) 4 Foreword This document (EN 1870-13:2007+A2:2012) has been prepared by Technical Committee CEN/TC 142 “Woodworking machines - Safety”, the secretariat of which is held by UNI. This European Standard shall be given t
21、he status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2012, and conflicting national standards shall be withdrawn at the latest by September 2012. Attention is drawn to the possibility that some of the elements of this document may
22、 be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document includes Amendment 1, approved by CEN on 2009-08-13, and Amendment 2, approved by CEN on 2012-01-30. This document supersedes #EN 1870-13:2007+A1:2009$. The
23、 start and finish of text introduced or altered by amendment is indicated in the text by tags ! “ and # $. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of the Machinery Directive.
24、#For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document.$ Organisations contributing to the preparation of this European Standard include the European Committee of Woodworking Machinery Manufacturers Association “EUMABOIS“. The European Standards
25、produced by CEN/TC 142 are particular to woodworking machines and complement the relevant A and B Standards on the subject of general safety (see introduction of #EN ISO 12100:2010$ for a description of A, B and C standards). EN 1870, Safety of woodworking machines Circular sawing machines, consists
26、 of the following parts: Part 1: Circular saw benches (with and without sliding table), dimension saws and building site saws; !deleted text“ Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches; Part 4: Multi-blade rip sawing machines with manual loa
27、ding and/or unloading; Part 5: Circular saw -benches/up-cutting cross-cut sawing machines; Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading; Part 7: Single blade log sawing machines with in
28、tegrated feed table and manual loading and/or unloading; Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading; Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unload
29、ing; BS EN 1870-13:2007+A2:2012EN 1870-13:2007+A2:2012 (E) 5 Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines; Part 11: Semi-automatic and automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws); Part 12: Pendulum cross-cut sawing mac
30、hines; Part 13: Horizontal beam panel sawing machines; Part 14: Vertical panel sawing machines; Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading; Part 16: Double mitre sawing machines for V-cutting; Part 17: Manual horizontal cu
31、tting cross-cut sawing machines with one saw unit (manual radial arm saws); # Part 18: Dimension saws; Part 19: Circular saw benches (with and without sliding table) and building site saws.$ According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following coun
32、tries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slov
33、enia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 1870-13:2007+A2:2012EN 1870-13:2007+A2:2012 (E) 6 Introduction This document has been prepared to be a harmonised standard to provide one means of conforming to the essential safety requirements of the Machinery Directive, and as
34、sociated EFTA regulations. This document is a type C standard as defined in #EN ISO 12100:2010$. The machinery concerned and the extent to which hazards, hazardous situations and events are covered are indicated in the scope of this document. When provisions of this type C standard are different fro
35、m those which are stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of other standards, for machines that have been designed and built according to the provisions of this type C standard. The requirements of this document are directed to manu
36、facturers and their authorised representatives of horizontal beam panel sawing machines. This document is also useful for designers and importers. This document also includes provision and examples of information to be provided by the manufacturer to the user. Common requirements for tooling are giv
37、en in #EN 847-1:2005+A1:2007$. BS EN 1870-13:2007+A2:2012EN 1870-13:2007+A2:2012 (E) 7 1 Scope This document deals with !all significant hazards“, hazardous situations and events as listed in Clause 4 which are relevant to horizontal beam panel sawing machines #where the saw unit of the front cuttin
38、g line is mounted$ below the workpiece support and which are manually or mechanically loaded and / or unloaded, fitted with: a side pressure device and / or the facility for scoring and / or the facility for post-formed / soft-formed edge pre-cutting and / or a panel turning device and / or a pushin
39、g out device and / or pneumatic clamping of the saw blade and / or a powered panel loading device and / or a grooving device and / or additional cutting line(s) inside the machine for longitudinal and / or head cut (before transversal cutting line) and / or workpiece vacuum clamping as part of a pan
40、el turning device or of a panel loading device, hereinafter referred to as “machines“ when they are used as intended and under the conditions foreseen by the manufacturer #including reasonably foreseeable misuse$. The machines are designed for cutting panels consisting of: a) wood based materials su
41、ch as chipboard, fibreboard, plywood and also these materials where they are covered with plastic/light alloy laminates which can be cut easily; b) solid wood; c) hardened rubber and hardened plastic material; d) non ferrous materials e.g. light alloy; e) gypsum boards, gypsum bounded fibreboards; f
42、) composite boards made from the materials listed above. This document does not deal with specific hazards related to: 1) specific features which differ from the list above; 2) the machining of panels with grooving tools; 3) mechanical unloading of panels; 4) the combination of a single machine bein
43、g used with any other machine (as part of a line). This document is not applicable to horizontal beam panel sawing machines which are manufactured before the date of its publication as EN. BS EN 1870-13:2007+A2:2012EN 1870-13:2007+A2:2012 (E) 8 NOTE Machines covered by this standard if manually load
44、ed and / or unloaded are listed under #1.4$ of Annex IV of the Machinery Directive. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of th
45、e referenced document (including any amendments) applies. !deleted text“ #EN 614-1:2006+A1:2009$, Safety of machinery Ergonomic design principles Part 1: Terminology and general principles #EN 847-1:2005+A1:2007$, Tools for woodworking Safety requirements Part 1: Milling tools, circular saw blades #
46、EN 894-1:1997+A1:2008$, Safety of machinery Ergonomics requirements for the design of displays and control actuators Part 1: General principles for human interactions with displays and control actuators #EN 894-2:1997+A1:2008$, Safety of machinery Ergonomics requirements for the design of displays a
47、nd control actuators Part 2: Displays #EN 894-3:2000+A1:2008$, Safety of machinery Ergonomics requirements for the design of displays and control actuators Part 3: Control actuators #deleted text$ #EN 1005-1:2001+A1:2008$, Safety of machinery Human physical performance Part 1: Terms and definitions
48、#EN 1005-2:2003+A1:2008$, Safety of machinery Human physical performance Part 2: Manual handling of machinery and component parts of machinery #EN 1005-3:2002+A1:2008$, Safety of machinery Human physical performance Part 3: Recommended force limits for machinery operation #EN 1005-4:2005+A1:2008$, S
49、afety of machinery Human physical performance Part 4: Evaluation of working postures and movements in relation to machinery #EN 1037:1995+A1:2008$, Safety of machinery Prevention of unexpected start-up #EN 1088:1995+A2:2008$, Safety of machinery Interlocking devices associated with guards Principles for design and selection #EN 1760-3:2004+A
