1、BSI Standards PublicationBS EN 2833-005:2013Aerospace series Glass fibrethermosetting preimpregnates Technical specificationPart 005: Glass fabric/phenolic resinpreimpregnateBS EN 2833-005:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 2833-005:2013.The UK
2、 participation in its preparation was entrusted to TechnicalCommittee ACE/65, Non-metallic materials for aerospace purposes.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a c
3、ontract. Users are responsible for its correctapplication. The British Standards Institution 2013.Published by BSI Standards Limited 2013ISBN 978 0 580 81716 8 ICS 49.025.40Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the
4、authority of theStandards Policy and Strategy Committee on 31 August 2013.Amendments issued since publicationDate Text affectedThis British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 September 2013.Amendments/corrigenda issued since publicationDate
5、 Text affectedBS EN 2833-005:2013EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 2833-005 August 2013 ICS 49.025.40 English Version Aerospace series - Glass fibre thermosetting preimpregnates - Technical specification - Part 005: Glass fabric/phenolic resin preimpregnate Srie arospatiale - Prim
6、prgns de verre textile/rsine thermodurcissable - Spcification technique - Partie 005 : Verre textile/rsine phnolique primprgns Luft- und Raumfahrt - Warmhrtbare Glasfaser - Prepregs -Technische Lieferbedingungen - Teil 005: Gewebe - Prepregs aus Glasfaser und Phenolharz This European Standard was ap
7、proved by CEN on 8 May 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national s
8、tandards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language an
9、d notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hunga
10、ry, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Managemen
11、t Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2833-005:2013: EBS EN 2833-005:2013EN 2833-005:2013 (E)2Contents PageForeword3 1 Scope 4 2 Normative references 4 3 Definitions, abbre
12、viations.5 4 Material description.5 5 Testing 6 5.1 Screening6 5.2 Qualification .6 5.3 Batch release .6 BS EN 2833-005:2013EN 2833-005:2013 (E)3ForewordThis document (EN 2833-005:2013) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN).After
13、 enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN.This European Standard shall be given the status of a nat
14、ional standard, either by publication of an identical text or by endorsement, at the latest by February 2014, and conflicting national standards shall be withdrawn at the latest by February 2014.Attention is drawn to the possibility that some of the elements of this document may be the subject of pa
15、tent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights.According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cr
16、oatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
17、 the United Kingdom.BS EN 2833-005:2013EN 2833-005:2013 (E)2Contents PageForeword3 1 Scope 4 2 Normative references 4 3 Definitions, abbreviations.5 4 Material description.5 5 Testing 6 5.1 Screening6 5.2 Qualification .6 5.3 Batch release .6 BS EN 2833-005:2013EN 2833-005:2013 (E)3ForewordThis docu
18、ment (EN 2833-005:2013) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN).After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Of
19、ficial Services of the member countries of ASD, prior to its presentation to CEN.This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2014, and conflicting national standards shall be withdraw
20、n at the latest by February 2014.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights.According to the CEN-CENELEC Internal Regulations, the
21、 national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia
22、, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.BS EN 2833-005:2013EN 2833-005:2013 (E)41 ScopeThis standard specifies the requirements for glass fabric/phenolic resin preimpregnates.It shal
23、l be used together with EN 2833-1.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referen
24、ced document (including any amendments) applies.EN 2155-12 Aerospace series Test methods for transparent materials for aircraft glazing Part 12: Determination of linear thermal expansionEN 2377 Aerospace series Glass fibre reinforced plastics Test method Determination of apparent interlaminar shear
25、strengthEN 2379 Aerospace series Fluids for assessment of non-metallic materialsEN 2489 Aerospace series Fibre reinforced plastics Determination of the action of test fluidsEN 2743 Aerospace series Fibre reinforced plastics Standard procedures for conditioning prior to testing unaged materialsEN 282
26、4 Aerospace series Burning behaviour of non-metallic materials under the influence of radiating heat and flames Determination of smoke density and gas components in the smoke of materials Test equipment, apparatus and mediaEN 2825 Aerospace series Burning behaviour of non-metallic materials under th
27、e influence of radiating heat and flames Determination of smoke densityEN 2826 Aerospace series Burning behaviour of non-metallic materials under the influence of radiating heat and flames Determination of gas components in the smokeEN 3783 Aerospace series Fibre composite materials Normalization of
28、 fibre dominated mechanical propertiesEN 3844-1 Aerospace series Flammability of non-metallic materials Part 1: Small burner test, vertical Determination of the vertical flame propagationEN 38344-2 Aerospace series Flammability of non-metallic materials Part 2: Small burner test, horizontal Determin
29、ation of the horizontal flame propagation1)EN 3844-3 Aerospace series Flammability of non-metallic materials Part 3: Small burner test, 45 Determination of the resistance of material to flame and glow propagation and to flame penetrationISO 1183-2 Plastics Methods for determining the density of non-
30、cellular plastics Part 2: Density gradient column methodISO 1889 Reinforcement yarns Determination of linear densityISO 3572 Textiles Weaves Definitions of general terms and basic weavesprEN 2823 Aerospace series Fibre reinforced plastics Determination of the effect of exposure to humid atmosphere o
31、n physical and mechanical characteristics1)BS EN 2833-005:2013EN 2833-005:2013 (E)5prEN 2833-1 Aerospace series Glass fibre thermosetting preimpregnates Technical specification Part 1: General requirements1)prEN 3615 Aerospace series Fibre reinforced plastics Determination of the conditions of expos
32、ure to humid atmosphere and of moisture absorption1)prEN 3703 Aerospace series Heat release rate for materials and products under the influence of radiating heat and flames Test method 1)prEN 6032 Aerospace series Fibre reinforced plastics Test method Determination of the glass transition temperatur
33、es1)prEN 6037 Aerospace series Fibre reinforced plastics Test method Determination of bearing strength1)prEN 7000-1 Aerospace series Non-metallic materials Rules for the drafting and presentation of material standards Part 1: General rules1)ASTM D-2520 Standard Test Methods for Complex Permittivity
34、(Dielectric Constant) of Solid Electrical Insulating Materials at Microwave Frequencies and Temperatures to 1 650 C2)3 Definitions, abbreviationsNot applicable.4 Material descriptionSee table 1.Table 1 Description of preimpregnate materialParameter TypeResinType PhenolicGrade Flame resistantReinforc
35、ementFibre “E” glassForm Fabric in accordance with ISO 35721) Published as ASD-STAN Prestandard at the date of publication of this standard2) Published by: American Society for Testing and Materials (ASTM), 1916 Race Street, Philadelphia, PA 19103, USA.BS EN 2833-005:2013EN 2833-005:2013 (E)41 Scope
36、This standard specifies the requirements for glass fabric/phenolic resin preimpregnates.It shall be used together with EN 2833-1.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated refere
37、nces, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.EN 2155-12 Aerospace series Test methods for transparent materials for aircraft glazing Part 12: Determination of linear thermal expansionEN 2377 Aerospace s
38、eries Glass fibre reinforced plastics Test method Determination of apparent interlaminar shear strengthEN 2379 Aerospace series Fluids for assessment of non-metallic materialsEN 2489 Aerospace series Fibre reinforced plastics Determination of the action of test fluidsEN 2743 Aerospace series Fibre r
39、einforced plastics Standard procedures for conditioning prior to testing unaged materialsEN 2824 Aerospace series Burning behaviour of non-metallic materials under the influence of radiating heat and flames Determination of smoke density and gas components in the smoke of materials Test equipment, a
40、pparatus and mediaEN 2825 Aerospace series Burning behaviour of non-metallic materials under the influence of radiating heat and flames Determination of smoke densityEN 2826 Aerospace series Burning behaviour of non-metallic materials under the influence of radiating heat and flames Determination of
41、 gas components in the smokeEN 3783 Aerospace series Fibre composite materials Normalization of fibre dominated mechanical propertiesEN 3844-1 Aerospace series Flammability of non-metallic materials Part 1: Small burner test, vertical Determination of the vertical flame propagationEN 38344-2 Aerospa
42、ce series Flammability of non-metallic materials Part 2: Small burner test, horizontal Determination of the horizontal flame propagation1)EN 3844-3 Aerospace series Flammability of non-metallic materials Part 3: Small burner test, 45 Determination of the resistance of material to flame and glow prop
43、agation and to flame penetrationISO 1183-2 Plastics Methods for determining the density of non-cellular plastics Part 2: Density gradient column methodISO 1889 Reinforcement yarns Determination of linear densityISO 3572 Textiles Weaves Definitions of general terms and basic weavesprEN 2823 Aerospace
44、 series Fibre reinforced plastics Determination of the effect of exposure to humid atmosphere on physical and mechanical characteristics1)BS EN 2833-005:2013EN 2833-005:2013 (E)5prEN 2833-1 Aerospace series Glass fibre thermosetting preimpregnates Technical specification Part 1: General requirements
45、1)prEN 3615 Aerospace series Fibre reinforced plastics Determination of the conditions of exposure to humid atmosphere and of moisture absorption1)prEN 3703 Aerospace series Heat release rate for materials and products under the influence of radiating heat and flames Test method 1)prEN 6032 Aerospac
46、e series Fibre reinforced plastics Test method Determination of the glass transition temperatures1)prEN 6037 Aerospace series Fibre reinforced plastics Test method Determination of bearing strength1)prEN 7000-1 Aerospace series Non-metallic materials Rules for the drafting and presentation of materi
47、al standards Part 1: General rules1)ASTM D-2520 Standard Test Methods for Complex Permittivity (Dielectric Constant) of Solid Electrical Insulating Materials at Microwave Frequencies and Temperatures to 1 650 C2)3 Definitions, abbreviationsNot applicable.4 Material descriptionSee table 1.Table 1 Des
48、cription of preimpregnate materialParameter TypeResinType PhenolicGrade Flame resistantReinforcementFibre “E” glassForm Fabric in accordance with ISO 35721) Published as ASD-STAN Prestandard at the date of publication of this standard2) Published by: American Society for Testing and Materials (ASTM)
49、, 1916 Race Street, Philadelphia, PA 19103, USA.BS EN 2833-005:2013EN 2833-005:2013 (E)65 Testing5.1 ScreeningScreening shall be carried out in accordance with prEN 2833-1 and tables 2, 3 and 5 of this standard.5.2 QualificationQualification shall be carried out in accordance with prEN 2833-1 and tables 2, 3, 4 and 5 of this specification.5.3 Batch releaseBatch r
