1、Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessoriesPart 004: Die for crimping tool M22520/5-01 - Product standardBS EN 4008-004:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPE
2、NNE EUROPISCHE NORM EN 4008-004 September 2017 ICS 49.060 English Version Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 004: Die for crimping tool M22520/5-01 - Product standard Srie Arospatiale - Organes de connexion lectrique et
3、 optique - Outils de sertissage et accessoires associs - Partie 004 : Positionneur pour pince sertir M22520/5-01 - Norme de produit Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Crimpwerkzeuge und zugehriges Zubehr - Teil 004: Crimpbacken fr Crimpzange M22520/5-01 - Produktnor
4、m This European Standard was approved by CEN on 2 January 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical re
5、ferences concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a
6、CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedo
7、nia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATI
8、ON EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4008-004:2017 ENational forewordThis British Standard is the UK implementation
9、of EN 4008-004:2017.The UK participation in its preparation was entrusted to Technical Committee ACE/6, Aerospace avionic electrical and fibre optic technology.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to inclu
10、de all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 96016 1ICS 49.060Compliance with a British Standard cannot confer immunity from legal obligations.This Britis
11、h Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 4008004:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4008-004 September 2017 ICS 49.060 E
12、nglish Version Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 004: Die for crimping tool M22520/5-01 - Product standard Srie Arospatiale - Organes de connexion lectrique et optique - Outils de sertissage et accessoires associs - Pa
13、rtie 004 : Positionneur pour pince sertir M22520/5-01 - Norme de produit Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Crimpwerkzeuge und zugehriges Zubehr - Teil 004: Crimpbacken fr Crimpzange M22520/5-01 - Produktnorm This European Standard was approved by CEN on 2 January 2
14、017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained
15、 on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CE
16、NELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, It
17、aly, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Ce
18、ntre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4008-004:2017 EBS EN 4008004:2017EN 4008-004:2017 (E) 2 Contents Page European foreword . 3 1 Scope 4 2 Normative references 4 3 Terms and
19、 definitions . 4 4 Required characteristics 4 5 Designation 7 6 Marking . 7 7 Technical specification 7 BS EN 4008004:2017EN 4008-004:2017 (E) 3 European foreword This document (EN 4008-004:2017) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-S
20、TAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the sta
21、tus of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2018, and conflicting national standards shall be withdrawn at the latest by March 2018. Attention is drawn to the possibility that some of the elements of this document may be the subjec
22、t of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
23、Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey an
24、d the United Kingdom. BS EN 4008004:2017EN 4008-004:2017 (E) 4 1 Scope This European Standard specifies the characteristics for the crimp dies used with the M22520/5-01 crimping tool to crimp electrical contacts according to EN 4008-002. 2 Normative references The following documents, in whole or in
25、 part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2591-100, Aerospace series Elements of elec
26、trical and optical connection Test methods Part 100: General EN 4008-001, Aerospace series Elements of electrical and optical connection Crimping tools and associated accessories Part 001: Technical specification EN 4008-002, Aerospace series Elements of electrical and optical connection Crimping to
27、ols and associated accessories Part 002: List of product standards SAE AS 22520/5-01, Crimping Tools, Terminal, Hand, Wire Termination. Large for Coaxial, Shielded Contacts and Ferrules, Terminal Lugs, Splices and End Caps 1)3 Terms and definitions For the purposes of this document, the terms and de
28、finitions given in EN 2591-100 apply. 4 Required characteristics 4.1 Description Securing the dies on the crimping tool is provided by the location of the undercut on the die lug into the spring retention mechanism of the crimp tool. The appropriate longitudinal positioning of the contacts with resp
29、ect to the crimp dies is provided by correct location of the contact into fixed positions on the crimp dies. 4.2 Dimensions See Figures 1 to 3. 1) Published by: SAE National (US) Society of Automotive Engineers http:/www.sae.org/ BS EN 4008004:2017EN 4008-004:2017 (E) 5 Key 1 M10 cap HD bolt 2 Guide
30、 plate 3 Type 2 places Figure 1 Crimp die assembly BS EN 4008004:2017EN 4008-004:2017 (E) 6 Detail A Pin position when jaws are closed Figure 2 Dimensions jaws closed Key 1 Spherical radius to blend Figure 3 Indenter BS EN 4008004:2017EN 4008-004:2017 (E) 7 5 Designation EXAMPLE NOTE If necessary, t
31、he code I9005 shall be placed between the description block and the identity block. 6 Marking See Figure 1. 7 Technical specification See EN 4008-001. BS EN 4008004:2017This page deliberately left blankThis page deliberately left blankBSI is the national body responsible for preparing British Standa
32、rds and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)About usWe bring together business, industry, government, consum
33、ers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors
34、 choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou
35、 can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can
36、 be ordered from our Customer Services team.Copyright in BSI publicationsAll the content in BSI publications, including British Standards, is the property of and copyrighted by BSI or some person or entity that owns copyright in the information used (such as the international standardization bodies)
37、 and has formally licensed such information to BSI for commercial publication and use.Save for the provisions below, you may not transfer, share or disseminate any portion of the standard to any other person. You may not adapt, distribute, commercially exploit, or publicly display the standard or an
38、y portion thereof in any manner whatsoever without BSIs prior written consent.Storing and using standardsStandards purchased in soft copy format: A British Standard purchased in soft copy format is licensed to a sole named user for personal or internal company use only. The standard may be stored on
39、 more than 1 device provided that it is accessible by the sole named user only and that only 1 copy is accessed at any one time. A single paper copy may be printed for personal or internal company use only.Standards purchased in hard copy format: A British Standard purchased in hard copy format is f
40、or personal or internal company use only. It may not be further reproduced in any format to create an additional copy. This includes scanning of the document.If you need more than 1 copy of the document, or if you wish to share the document on an internal network, you can save money by choosing a su
41、bscription product (see Subscriptions).Reproducing extractsFor permission to reproduce content from BSI publications contact the BSI Copyright & Licensing team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further information on our subscrip
42、tion products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with standards developments and rec
43、eive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revise
44、d or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences can cover as few or as many users as you wish. With updates supplied as soo
45、n as theyre available, you can be sure your documentation is current. For further information, email .RevisionsOur British Standards and other publications are updated by amendment or revision. We continually improve the quality of our products and services to benefit your business. If you find an i
46、naccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowledge Centre.Useful ContactsCustomer ServicesTel: +44 345 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 345 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Group Headquarters389 Chiswick High Road London W4 4AL UKBSI Back Cover.indd 1 27/01/2016 14:20
