1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 4165-025:2011Aerospace series Connectors, electrical,rectangular, modular Operating temperature 175 CcontinuousPart 025: Module receptacle ProductNormCopyright European Com
2、mittee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 4165-025:2011 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 4165-025:2011.The UK participation in its prep
3、aration was entrusted to TechnicalCommittee ACE/6, Aerospace avionic electrical and fibre optictechnology.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are
4、 responsible for its correctapplication. BSI 2011ISBN 978 0 580 75695 5ICS 49.060Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 December 2011.Amendments issued
5、 since publicationDate Text affectedCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 4165-025:2011EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4165-025 November 2011
6、 ICS 49.060 English Version Aerospace series - Connectors, electrical, rectangular, modular -Operating temperature 175 C continuous - Part 025: Module receptacle - Product Norm Srie Arospatiale - Connecteurs lectriques rectangulaires, modulaires dutilisation temprature 175 C continu - Partie 025: Em
7、base mono-module - Norme de produit Luft- und Raumfahrt - Elektrischer Rechtecksteckverbinder in Modularer Bauweise - Betriebstemperatur 175 C konstant - Teil 025: Fester teckverbinder, fr ein Modul - Produknorm This European Standard was approved by CEN on 24 September 2011. CEN members are bound t
8、o comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-C
9、ENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
10、the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Pol
11、and, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by
12、any means reserved worldwide for CEN national Members. Ref. No. EN 4165-025:2011: ECopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 4165-025:2011EN 4165-025:2011 (E) 2 Conte
13、nts Page Foreword 31 Scope 42 Normative references 43 Terms and definitions .44 Required characteristics .45 Designation . 236 Marking 257 Technical specification 258 Mounting example 25Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproducti
14、on or networking permitted without license from IHS-,-,-BS EN 4165-025:2011EN 4165-025:2011 (E) 3 Foreword This document (EN 4165-025:2011) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordanc
15、e with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an
16、identical text or by endorsement, at the latest by May 2012, and conflicting national standards shall be withdrawn at the latest by May 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held res
17、ponsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Fin
18、land, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Copyright European Committee for Standardization Provided by IHS under license
19、 with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 4165-025:2011EN 4165-025:2011 (E) 4 1 Scope This European Standard defines the single module receptacle used in the family of rectangular electrical connectors. The receptacle corresponding to this plug
20、 is defined in EN 4165-024. Accessories and protective cover corresponding to those plugs are defined in EN 4165-026. The cavity of this connector is uncoded, so it can accept polarized modules N, A, B, C and D as defined in EN 4165-002. 2 Normative references The following referenced documents are
21、indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2424, Aerospace series Marking of aerospace products EN 4165-001, Aerospace series Co
22、nnectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 001: Technical specification EN 4165-002, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 002: Specification of performance and contact arrangements EN 416
23、5-024, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 024: Single module plug Product standard EN 4165-026, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 026: Accessories for single
24、 modules Product standard 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 4165-001 apply. 4 Required characteristics 4.1 Single module flange receptacle design (short receptacle) Type 0 Dimensions and positions of keying polarization, see Clause 5. Se
25、e Figures 1, 2, 3 and 4. Mass = 6 g max. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 4165-025:2011EN 4165-025:2011 (E) 5 Dimensions in millimetres Figure 1 Dimensions i
26、n millimetres Figure 2 Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 4165-025:2011EN 4165-025:2011 (E) 6 Dimensions in millimetres Figure 3 Dimensions in millimetres Figu
27、re 4 Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 4165-025:2011EN 4165-025:2011 (E) 7 4.2 Single module jack receptacle (extender) design (long receptacle) Type 7 Dimens
28、ions and positions of keying polarizations, see Clause 5. See Figures 5, 6, 7, 8 and 9. Mass = 7,5 g max. Dimensions in millimetres Figure 5 Dimensions in millimetres Figure 6 Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or netw
29、orking permitted without license from IHS-,-,-BS EN 4165-025:2011EN 4165-025:2011 (E) 8 Dimensions in millimetres Figure 7 Dimensions in millimetres Figure 8 Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted w
30、ithout license from IHS-,-,-BS EN 4165-025:2011EN 4165-025:2011 (E) 9 Dimensions in millimetres Key 1 Keying module 2 Index for rear accessory Figure 9 4.3 Single module extender rear accessory attachment design for Type 7 only Dimensions and positions of keying polarizations, see Clause 5. See Figu
31、res 10, 11, 12 and 13. Dimensions in millimetres Figure 10 Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 4165-025:2011EN 4165-025:2011 (E) 10 Dimensions in millimetres Ke
32、y 1 Cavity 2 2 on flats Figure 11 Dimensions in millimetres Figure 12 Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 4165-025:2011EN 4165-025:2011 (E) 11 Dimensions in mil
33、limetres Figure 13 4.4 Class See Table 1. Table 1 Class Description M Receptacle with housing (shell) nickel plated, composite material, 500 h resistance to salt mist, maximum operating temperature 175 C continuous Copyright European Committee for Standardization Provided by IHS under license with C
34、ENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 4165-025:2011EN 4165-025:2011 (E) 12 4.5 Panel cut out See Figures 14, 15, 16, 17, 18, 19, 20, 21, 22, 23 and 24. Free cut out is all receptacles wathever polarization, see Figure 15. Orientation cut out is fo
35、r all receptacle wathever polarization but provide 180 orientation, see Figure 16. Other Figure 17 to Figure 24 provide polarized panel cut out. Dimensions in millimetres Figure 14 Panel cut out general dimensions Dimensions in millimetres Figure 15 Free mounting cut out dimensions Figure 16 Oriente
36、d panel cut out dimensions Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 4165-025:2011EN 4165-025:2011 (E) 13 Dimensions in millimetres Polarization N Polarization A Figu
37、re 17 Detail keying dimensions for N and A panel cut out Dimensions in millimetres Polarization B Polarization C Figure 18 Detail keying dimensions for B and C panel cut out Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networ
38、king permitted without license from IHS-,-,-BS EN 4165-025:2011EN 4165-025:2011 (E) 14 Dimensions in millimetres Polarization D Polarization E Figure 19 Detail keying dimensions for D and E panel cut out Dimensions in millimetres Polarization F Polarization G Figure 20 Detail keying dimensions for F
39、 and G panel cut out Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 4165-025:2011EN 4165-025:2011 (E) 15 Dimensions in millimetres Polarization H Polarization J Figure 21
40、Detail keying dimensions for H and J panel cut out Dimensions in millimetres Polarization K Polarization M Figure 22 Detail keying dimensions for K and M panel cut out Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking p
41、ermitted without license from IHS-,-,-BS EN 4165-025:2011EN 4165-025:2011 (E) 16 Dimensions in millimetres Polarization P Polarization Q Figure 23 Detail keying dimensions for P and Q panel cut out Dimensions in millimetres Polarization R Figure 24 Detail keying dimensions for R panel cut out 4.6 Ad
42、ditional parts 4.6.1 Colour coding plate (Type code C) Colour according to polarization, see 5.2. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 4165-025:2011EN 4165-025:2
43、011 (E) 17 See Figures 25, 26, 27, 28, 29, 30, 31, 32 and 33. Dimensions are in millimetres. Mass = 1,2 g max. Dimensions in millimetres Key 1 Four holes 2,93,1Figure 25 Panel cut out general dimensions Dimensions in millimetres Polarization N Polarization A Figure 26 Detail keying dimensions for N
44、and A colour coding plate Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 4165-025:2011EN 4165-025:2011 (E) 18 Dimensions in millimetres Polarization B Polarization C Figur
45、e 27 Detail keying dimensions for B and C colour coding plate Dimensions in millimetres Polarization D Polarization E Figure 28 Detail keying dimensions for D and E colour coding plate Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproductio
46、n or networking permitted without license from IHS-,-,-BS EN 4165-025:2011EN 4165-025:2011 (E) 19 Dimensions in millimetres Polarization F Polarization G Figure 29 Detail keying dimensions for F and G colour coding plate Dimensions in millimetres Polarization H Polarization J Figure 30 Detail keying
47、 dimensions for H and J colour coding plate Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 4165-025:2011EN 4165-025:2011 (E) 20 Dimensions in millimetres Polarization K Polarization M Figure 31 Detail keying dimensions for K and M colour coding plate Dimensions in millimetres Polarization P Polarization Q Figure 32 Detail k
