1、BS EN 4644-142:2016Aerospace series Connector,electrical and optical,rectangular, modular,rectangular inserts, operatingtemperature 175 C (or 125 C)continuousPart 142: Size 4 receptacle for rack andpanel application, class C and D ProductstandardBSI Standards PublicationWB11885_BSI_StandardCovs_2013
2、_AW.indd 1 15/05/2013 15:06BS EN 4644-142:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 4644-142:2016. It supersedes BS EN 4644-142:2012 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee ACE/6, Aerospace avion
3、ic electrical and fibre optic technology.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards
4、 Institution 2017.Published by BSI Standards Limited 2017ISBN 978 0 580 95147 3 ICS 49.060; 49.090 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 201
5、7.Amendments/corrigenda issued since publicationDate Text affectedBS EN 4644-142:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4644-142 December 2016 ICS 49.060; 49.090 Supersedes EN 4644-142:2012English Version Aerospace series - Connector, electrical and optical, rectangular, modular, r
6、ectangular inserts, operating temperature 175 C (or 125 C) continuous - Part 142: Size 4 receptacle for rack and panel application, class C and D - Product standard Srie arospatiale - Connecteur, lectrique et optique, rectangulaire, modulaire, inserts rectangulaires, temprature de fonctionnement 175
7、 C (ou 125 C) continu - Partie 142 : Embase, taille 4, pour applications rackables, classes C et D - Norme de produit Luft- und Raumfahrt - Elektrische und optische Rechtecksteckverbinder, modular, rechteckige Kontakteinstze, Dauerbetriebstemperatur 175 C (oder 125 C) konstant - Teil 142: Fester Ste
8、ckverbinder, Gre 4, fr Einschubanwendungen, Klasse C und D - Produktnorm This European Standard was approved by CEN on 23 October 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national
9、standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version
10、in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
11、 Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EURO
12、PEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4644-142:2016 EB
13、S EN 4644-142:2016EN 4644-142:2016 (E) 2 Contents Page European foreword 3 1 Scope 4 2 Normative references 4 3 Terms and definitions . 4 4 Required characteristics 4 5 Designation . 9 6 Marking . 9 7 Technical specification . 9 BS EN 4644-142:2016EN 4644-142:2016 (E) 3 European foreword This docume
14、nt (EN 4644-142:2016) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this European Standard has received the approval of the National Associations an
15、d the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2017, and conflicting national standards shall be wit
16、hdrawn at the latest by June 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 4644-142:2012. Accordin
17、g to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Gr
18、eece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 4644-142:2016EN 4644-142:2016 (E) 4 1 Scope This European Standard specifies the size 4 r
19、eceptacle for rack and panel application used in the family of modular rectangular electrical and optical connector with rectangular inserts. The plug corresponding to this receptacle is defined in EN 4644-141. 2 Normative references The following documents, in whole or in part, are normatively refe
20、renced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 4644-001, Aerospace series Connector, electrical and optical, rectangu
21、lar, modular, rectangular inserts, operating temperature 175 C (or 125 C) continuous Part 001: Technical specification EN 4644-002, Aerospace series Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 C (or 125 C) continuous Part 002: Specification
22、 of performance and contact arrangements EN 4644-141, Aerospace series Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 C (or 125 C) continuous Part 141: Size 4 plug for rack and panel applications, class C and D Product standard 3 Terms and def
23、initions For the purposes of this document, the terms and definitions given in EN 4644-001 apply. 4 Required characteristics 4.1 Dimensions and recommended panel cut out See Figures 1 to 2. BS EN 4644-142:2016EN 4644-142:2016 (E) 5 Key 1 Coding pins NOTE Ar, Br, Cr axis, see EN 4644-001. Figure 1 BS
24、 EN 4644-142:2016EN 4644-142:2016 (E) 6 Key 1 2 self-locking thread (see housing type in Clause 5 “Designation“ for more details) 2 Chamfer 3 Axis of 177,60 4 See EN 4644-001 NOTE Ar, Br, Cr axis, see EN 4644-001. Figure 2 Universal panel cut-out (compatible with all the shell coding) BS EN 4644-142
25、:2016EN 4644-142:2016 (E) 7 4.2 Mass 80 g max. 4.3 Panel cut-out coding. When several size 4 connectors are used in the same equipment, a coding is available on the shell to associate the correct shell with the correct panel cut-out. On the panel cut-out, four area are coded, area 1, 2, 3 and 4 (see
26、 Figure 3). For each area, 1 of the 2 holes should be drilled (hole No. 1 or hole No. 2) Each hole on the panel cut-out corresponds to the use of a coding pin on the shell. Coding shown on Figure 3 as an example is: Coding H: 1221 Hole No. 1 drilled in Area 1 Hole No. 2 drilled in Area 2 Hole No. 2
27、drilled in Area 3 Hole No. 1 drilled in Area 4 Key 1 Black holes correspond to holes that should not be machined in the example. Figure 3 Panel front view BS EN 4644-142:2016EN 4644-142:2016 (E) 8 Table 1 Panel cut-out coding Hole No. drilled in area Remarks 1 2 3 4 Shell coding equivalent to the pa
28、nel cut-out coding Position of the coding pin in Area 1 Position of the coding pin in Area 2 Position of the coding pin in Area 3 Position of the coding pin in Area 4 A Hole 1 and 2 drilled on the panel cut-out Coding pin delivered unassembled with the shell Hole 1 and 2 drilled on the panel cut-out
29、 Coding pin delivered unassembled with the shell Hole 1 and 2 drilled on the panel cut-out Coding pin delivered unassembled with the shell Hole 1 and 2 drilled on the panel cut-out Coding pin delivered unassembled with the shell Universal panel cut-out that could be used with all the shell B 1 1 1 1
30、 C 1 1 1 2 D 1 1 2 1 E 1 1 2 2 F 1 2 1 1 G 1 2 1 2 H 1 2 2 1 (shown in Figure 3) J 1 2 2 2 K 2 1 1 1 L 2 1 1 2 M 2 1 2 1 N 2 1 2 2 P 2 2 1 1 R 2 2 1 2 S 2 2 2 1 T 2 2 2 2 Z Connector delivered without coding pin BS EN 4644-142:2016EN 4644-142:2016 (E) 9 5 Designation EXAMPLE Description block ELECTR
31、ICAL CONNECTOR, SIZE 4 RECEPTACLE Identity block EN4644-142CM000G Number of this standard Shell class (see EN 4644-002) Housing type (see Figure 2) M: self-locking thread M3 0,5 U: self-locking thread 4-40 UNC 2B Polarization code: 999: shell delivered with no polarizing hardware 000: shell delivere
32、d with polarizing hardware unassembled Others codes: shell delivered with polarizing hardware assembled (see EN 4644-002) Panel cut-out coding A to T (see Table 1) 6 Marking Housing identification marking, as specified in Clause 5. In addition, marking shall show: date of manufacture (year-week); ma
33、nufacturer name or trademark. 7 Technical specification See EN 4644-001. This page deliberately left blankThis page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Ro
34、yal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)About usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -base
35、d solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you wi
36、th the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European a
37、nd international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.Copyright in BSI publicationsAll the content in BSI
38、publications, including British Standards, is the property of and copyrighted by BSI or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use.Save for t
39、he provisions below, you may not transfer, share or disseminate any portion of the standard to any other person. You may not adapt, distribute, commercially exploit, or publicly display the standard or any portion thereof in any manner whatsoever without BSIs prior written consent.Storing and using
40、standardsStandards purchased in soft copy format: A British Standard purchased in soft copy format is licensed to a sole named user for personal or internal company use only. The standard may be stored on more than 1 device provided that it is accessible by the sole named user only and that only 1 c
41、opy is accessed at any one time. A single paper copy may be printed for personal or internal company use only.Standards purchased in hard copy format: A British Standard purchased in hard copy format is for personal or internal company use only. It may not be further reproduced in any format to crea
42、te an additional copy. This includes scanning of the document.If you need more than 1 copy of the document, or if you wish to share the document on an internal network, you can save money by choosing a subscription product (see Subscriptions).Reproducing extractsFor permission to reproduce content f
43、rom BSI publications contact the BSI Copyright & Licensing team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 Br
44、itish and adopted European and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscript
45、ion format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of memb
46、ership, please visit a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as theyre available, you can be sure your documentation is current. For further information, e
47、mail .RevisionsOur British Standards and other publications are updated by amendment or revision. We continually improve the quality of our products and services to benefit your business. If you find an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the Know
48、ledge Centre.Useful ContactsCustomer ServicesTel: +44 345 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 345 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Group Headquarters389 Chiswick High Road London W4 4AL UKBSI Back Cover.indd 1 27/01/2016 14:20
