1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 50525-2-41:2011Electric cables Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Part 2-41: Cables for general applications Single core cable
2、s with crosslinked silicone rubber insulationBS EN 50525-2-41:2011 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN50525-2-41:2011. It partially supersedes BS6007:2006.The UK participation in its preparation was entrusted to TechnicalCommittee GEL/20/17, Electric
3、 Cables - Low voltage.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2011ISBN 978 0 580 64367 5ICS 29.060.20
4、Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 September 2011.Amendments issued since publicationDate Text affectedBS EN 50525-2-41:2011 BRITISH STANDARDNation
5、al forewordThis British Standard is the UK implementation of EN50525-2-41:2011. It partially supersedes BS6007:2006.The UK participation in its preparation was entrusted to TechnicalCommittee GEL/20/17, Electric Cables - Low voltage.A list of organizations represented on this committee can beobtaine
6、d on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2011ISBN 978 0 580 64367 5ICS 29.060.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This Brit
7、ish Standard was published under the authority of theStandards Policy and Strategy Committee on 30 September 2011.Amendments issued since publicationDate Text affectedThis British Standard is the UK implementation of EN 50525-2-41:2011.In the UK, the BS EN 50525 series of standards nullontain nullom
8、plenullsnullpersession details. The tanullle nullelonull nullest snullmmarinulles the relationship nulletnulleen these standards:Part 1 together with Supersedes2-null1 BS nullnullnull-4:1nullnullnull2-41, 2-42 BS null00null: 200null2-11 nullin partnull, 2-12, 2-21 nullin partnull, 2-null1 BS null500
9、:20002-11 nullin partnull, 2-21 nullin partnull, 2-51 nullin partnull, 2-nullnull, null-21 BS nullnull1null:20012-null1, 2-51 nullin partnull BS 6004:2000null-41 BS 7211:19982-22, 2-null2, 2-null2, null-11, null-null1 NoneNOTE All British Standards will remain current until they are withdrawn on 31
10、December 2012. British Standards in bold are only partially supersedednull and new editions onull BS null00null and BS null211 will be introduced on 1 nullanuary 2013.National nullnnenull Nnull nullinformatinullenull nullinulles information on the orinullins and identinullnullation of partinullnulll
11、ar nullanullle tnullpes.BS EN 50525-2-41:2011EUROPEAN STANDARD EN 50525-2-41 NORME EUROPENNE EUROPISCHE NORM May 2011 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Av
12、enue Marnix 17, B - 1000 Brussels 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 50525-2-41:2011 E ICS 29.060.20 Supersedes HD 22.3 S4:2004 + A1:2006English version Electric cables - Low voltage energy cables of rated voltag
13、es up to and including 450/750 V (U0/U) - Part 2-41: Cables for general applications - Single core cables with crosslinked silicone rubber insulation Cbles lectriques - Cbles dnergie basse tension de tension assigne au plus gale 450/750 V (U0/U) - Partie 2-41: Cbles pour applications gnrales - Condu
14、cteurs isols en silicone rticul Kabel und Leitungen - Starkstromleitungen mit Nennspannungen bis 450/750 V (U0/U) - Teil 2-41: Starkstromleitungen fr allgemeine Anwendungen - Einadrige Leitungen mit vernetzter Silikon-Isolierung This European Standard was approved by CENELEC on 2011-01-17. CENELEC m
15、embers are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on applic
16、ation to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretaria
17、t has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
18、 the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 50525-2-41:2011EN 50525-2-41:2011 - 2 - Foreword This European Standard was prepared by the Technical Committee CENELEC TC 20, Electric cables. The text of the draft was
19、submitted to the formal vote and was approved by CENELEC as EN 50525-2-41 on 2011-01-17. This document, which is one of a multipart series, supersedes HD 22.3 S4:2004 + A1:2006. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN
20、and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2012-01-17 latest date by which the na
21、tional standards conflicting with the EN have to be withdrawn (dow) 2014-01-17 _ BS EN 50525-2-41:2011- 3 - EN 50525-2-41:2011 Contents Page 1 Scope 42 Normative references . 43 Terms and definitions . 44 Heat resistant cables (180 C) . 54.1 Non-sheathed cables for fixed wiring H05S-U and H05S-K . 5
22、4.2 Non-sheathed cables for internal wiring H03S-K 54.3 Braided cables for fixed wiring H05SJ-U and H05SJ-K . 64.4 Sheathed cables for fixed wiring H05SS-K . 6Annex A (normative) Tests for cables to EN 50525-2-41 8Annex B (normative) General data . 9Annex C (normative) Requirements for compatibility
23、 test . 11C.1 Test conditions . 11C.2 Requirements . 11Bibliography . 12Tables Table A.1 8Table B.1 Dimensions of Types H05S-U, H05S-K . 9Table B.2 Dimensions of Type H03S-K. 9Table B.3 Dimensions of Types H05SJ-U and H05SJ-K . 10Table B.4 Dimensions of Type H05SS-K 10Table C.1 Requirements . 11BS E
24、N 50525-2-41:2011EN 50525-2-41:2011 - 4 - 1 Scope EN 50525-2-41 applies to cross-linked silicone rubber insulated single core cables. The types included are either insulated only, or insulated and braided, or insulated and sheathed. The cables are of rated voltages U0/U up to and including 300/500 V
25、. The cables are intended for use in fixed installations within high temperature zones. The maximum conductor operating temperature for each of the cables in this standard is 180 C. NOTE HD 516 contains extensive guidance on the safe use of cables in this standard. This EN 50525-2-41 should be read
26、in conjunction with EN 50525-1, which specifies general requirements. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced d
27、ocument (including any amendments) applies. NOTE One or more references to the standards below are in respect of a specific sub-division of that standard, for instance a clause, a table, a class or a type. Cross-references to these standards are undated and, at all times, the latest version applies.
28、 EN 50363-1 Insulating, sheathing and covering materials for low voltage energy cables - Part 1: Cross-linked elastomeric insulating compounds EN 50363-2-1 Insulating, sheathing and covering materials for low voltage energy cables - Part 2-1: Cross-linked elastomeric sheathing compounds EN 50395 Ele
29、ctrical test methods for low voltage energy cables EN 50396 Non electrical test methods for low voltage energy cables EN 50525-1 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 1: General requirements EN 60228 Conductors of insulated cables (
30、IEC 60228) EN 60332-1-2 Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame (IEC 60332-1-2) EN 60811-1-2 Insulating and sheathing materials of electric and optical c
31、ables - Common test methods - Part 1-2: General application - Thermal ageing methods (IEC 60811-1-2:1985 + A1:1989 + corr. May 1986) EN 60811-1-4 Insulating and sheathing materials of electric and optical cables - Common test methods - Part 1-4: General application - Tests at low temperature (IEC 60
32、811-1-4:1985 + A1:1993 + corr. May 1986) 3 Terms and definitions For the purposes of this document, the terms and definitions given in Clause 3 of EN 50525-1 apply. BS EN 50525-2-41:2011- 5 - EN 50525-2-41:2011 4 Heat resistant cables (180 C) 4.1 Non-sheathed cables for fixed wiring H05S-U and H05S-
33、K 4.1.1 Construction 4.1.1.1 Conductor The conductor shall be class 1 or class 5, according to EN 60228. 4.1.1.2 Sizes of cable The sizes of cable shall be: class 1 0,5 mm2to 2,5 mm2; class 5 0,5 mm2to 2,5 mm2. 4.1.1.3 Insulation The insulation shall be a cross-linked elastomeric compound of Type EI
34、 2 to EN 50363-1 applied around the conductor. 4.1.1.4 Marking The cable shall be marked with the CENELEC code H05S-U for cables with class 1 conductor, or H05S-K for cables with class 5 conductor. The marking shall comply with Clause 6 of EN 50525-1. 4.1.2 Requirements Each cable shall comply with
35、the appropriate requirements given in EN 50525-1, and the particular requirements of this Part. Testing shall be in accordance with Annex A, and the relevant tests indicated in column 6. The dimensions of the cables shall conform to Table B.1 for the relevant size. 4.2 Non-sheathed cables for intern
36、al wiring H03S-K 4.2.1 Construction 4.2.1.1 Conductor The conductor shall be class 5, according to EN 60228. 4.2.1.2 Sizes of cable The sizes of cable shall be 0,5 mm2to 2,5 mm2. 4.2.1.3 Insulation The insulation shall be a cross-linked elastomeric compound of Type EI 2 to EN 50363-1 applied around
37、the conductor. 4.2.1.4 Marking The cable shall be marked with the CENELEC code H03S-K. The marking shall comply with Clause 6 of EN 50525-1. BS EN 50525-2-41:2011EN 50525-2-41:2011 - 6 - 4.2.2 Requirements Each cable shall comply with the appropriate requirements given in EN 50525-1, and the particu
38、lar requirements of this Part. Testing shall be in accordance with Annex A, and the relevant tests indicated in column 7. The dimensions of the cables shall conform to Table B.2 for the relevant size. 4.3 Braided cables for fixed wiring H05SJ-U and H05SJ-K 4.3.1 Construction 4.3.1.1 Conductor The co
39、nductor shall be class 1 or class 5, according to EN 60228. 4.3.1.2 Sizes of cable The sizes of cable shall be: class 1 1,0 mm2to 10 mm2; class 5 0,5 mm2to 95 mm2. 4.3.1.3 Insulation The insulation shall be a cross-linked elastomeric compound of Type EI 2 to EN 50363-1 applied around the conductor.
40、4.3.1.4 Outer braid The core shall be covered by a treated glass fibre braid complying with 5.5.7 of EN 50525-1. 4.3.1.5 Marking The cable shall be marked with the CENELEC code H05SJ-U for cables with class 1 conductor, or H05SJ-K for cables with class 5 conductor. The marking shall be on the insula
41、tion and shall comply with Clause 6 of EN 50525-1. 4.3.2 Requirements Each cable shall comply with the appropriate requirements given in EN 50525-1, and the particular requirements of this Part. Testing shall be in accordance with Annex A, and the relevant tests indicated in column 8. The dimensions
42、 of the cables shall conform to Table B.3 for the relevant size. 4.4 Sheathed cables for fixed wiring H05SS-K 4.4.1 Construction 4.4.1.1 Conductor The conductor shall be class 5, according to EN 60228. BS EN 50525-2-41:2011- 7 - EN 50525-2-41:2011 4.4.1.2 Sizes of cable The sizes of cable shall be 0
43、,75 mm2to 2,5 mm2. 4.4.1.3 Insulation The insulation shall be a cross-linked elastomeric compound of Type EI 2 to EN 50363-1 applied around the conductor. 4.4.1.4 Sheath The sheath shall be crosslinked elastomeric compound of Type EM 9 to EN 50363-2-1. 4.4.1.5 Marking The cable shall be marked with
44、the CENELEC code H05SS-K. The marking shall be on the outer surface of the sheath, or on the insulation, and shall comply with Clause 6 of EN 50525-1. 4.4.2 Requirements Each cable shall comply with the appropriate requirements given in EN 50525-1, and the particular requirements of this Part. Testi
45、ng shall be in accordance with Annex A, and the relevant tests indicated in column 9. The dimensions of the cables shall conform to Table B.4 for the relevant size. The requirements to be met for the compatibility test shall be as given in Annex C. BS EN 50525-2-41:2011EN 50525-2-41:2011 - 8 - Annex
46、 A (normative) Tests for cables to EN 50525-2-41 Table A.1 1 2 3 4 5 6 7 8 9 Ref No. Tests Cate-gory of test Test method described in Applicability of test Subclause EN Clause 4.1 4.2 4.3 4.4 H05S-UH05S-KH03S-KH05SJ-UH05SJ-KH05SS-K1 Electrical tests b 1.1 Resistance of conductors T, S 50395 5 X X X
47、X 1.2 Voltage test on completed cable at 2 000 V T, S 50395 6 X X X X 1.3 Voltage test on cores according to the specified insulation thickness T, S 50395 7 1.3.1 - at 1 500 V up to and including 0,6 mm - - - X 1.3.2 - at 2 000 V above 0,6 mm - - - X 1.4 Absence of faults in insulation R 50395 10 X
48、X X X 1.5 Surface resistance of sheath T 50395 11 - - - X 2 Constructional and dimensional tests 2.1 Checking of compliance with constructional provisions T, S 50525-1 Inspection and manual tests X X X X 2.2 Measurement of thickness of insulation T, S 50396 4.1 X X X X 2.3 Measurement of thickness o
49、f sheath T, S 50396 4.1 - - - X 2.4 Measurement of overall diameter T, S 50396 4.4 2.4.1 - mean value X X X X 2.4.2 - ovality X X X - 2.5 Solderability test (Plain conductors) T 50396 8.2 X X X X 3 Insulation material tests T 50363-1 c - X X X X 4 Sheath material tests T 50363-2-1 c - - - - X 5 Compatibility test T 60811-1-2 8.1.4 - - - X 6 Impact test at - 25 C T 60811-1-4 8.5 X X X X 7 Test under fire conditions T 60332-1-2 - - - - X
