1、Direct acting indicating analogue electrical measuring instruments and their accessoriesPart 1: Definitions and general requirements common to all parts (IEC 60051-1:2016)BS EN 60051-1:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPE
2、NNE EUROPISCHE NORM EN 60051-1 April 2017 ICS 17.220.20 Supersedes EN 60051-1:1998 English Version Direct acting indicating analogue electrical measuring instruments and their accessories - Part 1: Definitions and general requirements common to all parts (IEC 60051-1:2016) Appareils de mesure lectri
3、ques indicateurs analogiques action directe et leurs accessoires - Partie 1: Dfinitions et exigences gnrales communes toutes les parties (IEC 60051-1:2016) Direkt anzeigende analoge elektrische Messgerte und ihr Zubehr - Teil 1: Definitionen und allgemeine Anforderungen fr alle Teile (IEC 60051-1:20
4、16) This European Standard was approved by CENELEC on 2016-03-09. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographi
5、cal references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibi
6、lity of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, F
7、ormer Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Ele
8、ctrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
9、 Ref. No. EN 60051-1:2017 E National forewordThis British Standard is the UK implementation of EN 60051-1:2017. It is identical to IEC 60051-1:2016. It supersedes BS EN 60051-1:1999, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee PEL/85, Measuring equ
10、ipment for electrical and electromagnetic quantities.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The Briti
11、sh Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 86201 4ICS 17.220.20Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 Septem
12、ber 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 600511:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60051-1 April 2017 ICS 17.220.20 Supersedes EN 60051-1:1998 English Version Direct acting indicating analogue electrical measuring instrument
13、s and their accessories - Part 1: Definitions and general requirements common to all parts (IEC 60051-1:2016) Appareils de mesure lectriques indicateurs analogiques action directe et leurs accessoires - Partie 1: Dfinitions et exigences gnrales communes toutes les parties (IEC 60051-1:2016) Direkt a
14、nzeigende analoge elektrische Messgerte und ihr Zubehr - Teil 1: Definitionen und allgemeine Anforderungen fr alle Teile (IEC 60051-1:2016) This European Standard was approved by CENELEC on 2016-03-09. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the
15、conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standa
16、rd exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are t
17、he national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Pola
18、nd, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue
19、 Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60051-1:2017 E BS EN 600511:2017EN 60051-1:2017 2 European foreword The text of document 85/521/FDIS, future edition 6 of IEC 60051-1, prepared by IEC/
20、TC 85 “Measuring equipment for electrical and electromagnetic quantities“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60051-1:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical
21、 national standard or by endorsement (dop) 2017-10-28 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-04-28 This document supersedes EN 60051-1:1998. Attention is drawn to the possibility that some of the elements of this document may be the
22、subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association. Endorsement notice The text of the Internatio
23、nal Standard IEC 60051-1:2016 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standard indicated : IEC 60359:2001 NOTE Harmonized as EN 60359:2002. IEC 61557-12:2007 NOTE Harmonized as EN
24、 61557-12:2008. IEC 62052-11:2003 NOTE Harmonized as EN 62052-11:2003. IEC 62586-1:2013 NOTE Harmonized as EN 62586-1:2014. BS EN 600511:2017EN 60051-1:2017 2 European foreword The text of document 85/521/FDIS, future edition 6 of IEC 60051-1, prepared by IEC/TC 85 “Measuring equipment for electrica
25、l and electromagnetic quantities“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60051-1:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (do
26、p) 2017-10-28 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-04-28 This document supersedes EN 60051-1:1998. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or
27、 CEN shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association. Endorsement notice The text of the International Standard IEC 60051-1:2016 was approv
28、ed by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standard indicated : IEC 60359:2001 NOTE Harmonized as EN 60359:2002. IEC 61557-12:2007 NOTE Harmonized as EN 61557-12:2008. IEC 62052-11:2003 NOTE H
29、armonized as EN 62052-11:2003. IEC 62586-1:2013 NOTE Harmonized as EN 62586-1:2014. - EN 60051-1:2017 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in t
30、his document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications,
31、indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60051-9 - Direct acting indicating analogue electrical-measuring instruments an
32、d their accessories - Part 9: Recommended test methods EN 60051-9 - IEC 60359 2001 Electrical and electronic measurement equipment - Expression of performance EN 60359 2002 IEC 60529 2013 Degrees of protection provided by enclosures (IP Code) - - + A1 1995 - - IEC 60721-3-3 1994 Classification of en
33、vironmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 3: Stationary use at weatherprotected locations EN 60721-3-3 1995 + A2 1996 + A2 1997 IEC 60721-3-7 1995 Classification of environmental conditions - Part 3: Classification of groups
34、of environmental parameters and their severities - Section 7: Portable and non-stationary use EN 60721-3-7 1995 + A1 1996 + A1 1997 IEC 61010-1 2010 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 1: General requirements EN 61010-1 2010 IEC 61010-2-030
35、 2010 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-030: Particular requirements for testing and measuring circuits EN 61010-2-030 2010 IEC 61326-1 2012 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: G
36、eneral requirements EN 61326-1 2013 BS EN 600511:2017EN 60051-1:2017 4 IEC 61326-2-1 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and
37、 measurement equipment for EMC unprotected applications EN 61326-2-1 - ISO 780 - Packaging - Pictorial marking for handling of goods EN ISO 780 - IEC 60051-1:2016 IEC 2016 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ DIRECT ACTING INDICATING ANALOGUE ELECTRICAL MEASURING INSTRUMENTS AND THEIR ACCES
38、SORIES Part 1: Definitions and general requirements common to all parts FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote inter
39、national co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafte
40、r referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also particip
41、ate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an in
42、ternational consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all rea
43、sonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply I
44、EC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conf
45、ormity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publica
46、tion. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or
47、 for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correc
48、t application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60051-1 has been prepared by
49、IEC technical committee 85: Measuring equipment for electrical and electromagnetic quantities. This sixth edition cancels and replaces the fifth edition published in 1997. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: adding the EMC requirements; updating the safety symbols and requirements according to new IEC 61010 series; replacing the concept of “error” to the concept of “uncertain
