EN 60317-43-1997 en Specifications for particular types of winding wires Part 43 Aromatic polyimide tape wrapped round copper wire class 240 (Incorporates Amendment A1 2010)《特种绕组线规.pdf
《EN 60317-43-1997 en Specifications for particular types of winding wires Part 43 Aromatic polyimide tape wrapped round copper wire class 240 (Incorporates Amendment A1 2010)《特种绕组线规.pdf》由会员分享,可在线阅读,更多相关《EN 60317-43-1997 en Specifications for particular types of winding wires Part 43 Aromatic polyimide tape wrapped round copper wire class 240 (Incorporates Amendment A1 2010)《特种绕组线规.pdf(12页珍藏版)》请在麦多课文档分享上搜索。
1、BRITISH STANDARD BS EN60317-43:1997Specifications for particular types of winding wires Part 43: Aromatic polyimide tape wrapped round copper wire, class 240ICS 29.060.10+A1:2010National forewordThis British Standard is the UK implementation of EN 60317-43:1997+A1:2010. It is identical to IEC 60317-
2、43:1997, incorporating amendment 1:2010. It supersedes BS EN 60317-43:1997 which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to IEC text carry the number of the IEC amendment. For example, text altered by IEC
3、amendment 1 is indicated by !“.The UK participation in its preparation was entrusted to Technical Committee GEL/55, Winding wires.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provision
4、s of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.BS EN 60317-43:1997+A1:2010This British Standard, havingbeen prepared under thedirection of the ElectrotechnicalSector Board, was publishedunder the aut
5、hority of theStandards Board and comesinto effect on15 August 1997 BSI 2010Amendments/corrigenda issued since publicationDate Comments 30 June 2010 Implementation of IEC amendment 1:2010 with CENELEC endorsement A1:2010ISBN 978 0 580 67188 3EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 60317-43:
6、1997+A1April 2010ICS 29.060.10Descriptors: Winding, electric wire, insulated wire, wrapped wire, copper, aromatic polyimide, circular shape, specification, dimensionEnglish versionSpecifications for particular types of winding wires Part43:Aromatic polyimide tape wrapped round copper wire, class 240
7、(IEC 60317-43:1997)Spcifications pour types particuliers defilsdebobinage Partie43:Fildesectioncirculaire en cuivrerecouvert dun ruban de polyimidearomatique, classe 240(CEI 60317-43:1997)Technische Lieferbedingungen fr bestimmteTypen von Wickeldrhten Teil43:Runddrhte aus Kupfer, mit Bandausaromatis
8、chem Polyimid umwickelt,Klasse 240(IEC 60317-43:1997)This European Standard was approved by CENELEC on 1997-03-11.CENELEC members are bound to comply with the CEN/CENELEC InternalRegulations which stipulate the conditions for giving this European Standardthe status of a national standard without any
9、 alteration.Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to anyCENELEC member.This European Standard exists in three official versions (English, French,German). A version in any other language made by t
10、ranslation under theresponsibility of a CENELEC member into its own language and notified to theCentral Secretariat has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria,Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Irelan
11、d, Italy,Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland andUnited Kingdom.CENELECEuropean Committee for Electrotechnical StandardizationComit Europen de Normalisation ElectrotechniqueEuropisches Komitee fr Elektrotechnische NormungCentral Secretariat: rue de Stassart 35, B-105
12、0 Brussels 1997 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.Ref. No. EN 60317-43:1997 E BSI 20102ForewordThe text of document 55/540/FDIS, future edition1 ofIEC60317-43, prepared by IECTC55, Winding wires, was submitted to the IEC-CENELEC pa
13、rallel vote and was approved by CENELEC asEN60317-43 on1997-03-11.The following dates were fixed:Annexes designated “normative” are part of the body of the standard.Annexes designated “informative” are given for information only.In this standard, Annex ZA is normative and Annex A and Annex B are inf
14、ormative.Annex ZA has been added by CENELEC.Endorsement noticeThe text of the International StandardIEC60317-43:1997 was approved by CENELEC as a European Standard without any modification.ContentsPageForeword 2Introduction 31 Scope 32 Normative references 33 Definitions and general noteson methods
15、of test 34 Dimensions 45 Electrical resistance 56 Elongation 57 Springiness 58 Flexibility and adherence 59 Heat shock 510 Cut-through 511 Resistance to abrasion 512 Resistance to solvents 513 Breakdown voltage 514 Continuity of insulation 615 Temperature index 616 Resistance to refrigerants 617 Sol
16、derability 618 Heat or solvent bonding 619 Dielectric dissipation factor 620 Resistance to transformer oil 621 Loss of mass 630 Packaging 6Annex A (informative) Conductor diametersfor intermediate sizes (R 40) 7Annex B (informative) Resistance 7Annex ZA (normative) Normative referencesto internation
17、al publications with their corresponding European publications 8Table 1 Conductor diameters 4Table 2 Minimum increases due tothe insulation 4Table 3 Maximum increases due tothe insulation 5Table 4 Elongation requirements 5Table 5 Breakdown voltage 6Table A.1 Conductor diameters (R 40) 7Table B.1 Nom
18、inal resistance 7 latest date by which the ENhas to be implemented at national level by publication of an identical national standard or by endorsement (dop)1997-12-01 latest date by which the national standards conflicting with the EN haveto be withdrawn (dow)1997-12-01Foreword to amendment A1The t
19、ext of document 55/1175/FDIS, future amendment 1 to IEC 660317-43:1997, prepared by IEC TC 55, Winding wires, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A1 to EN 60317-43:1997 on 2010-04-01.Attention is drawn to the possibility that some of the elements o
20、f this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights.The following dates were fi xed: latest date by which the amendment has to be implemented at national level by publication of an identical national standar
21、d or by endorsement (dop) 2011-01-01 latest date by which the national standards confl icting with the amendment have to be withdrawn (dow) 2013-04-01Endorsement noticeThe text of amendment 1:2010 to the International Standard IEC 60317-43:1997 was approved by CENELEC as an amendment to the European
22、 Standard without any modifi cation.BS EN 60317-43:1997+A1:2010EN 60317-43:1997+A1:2010 BSI 2010 3IntroductionThis part of IEC317 forms an element of a series of standards which deals with insulated wires used for windings in electrical equipment. The series has three groups describing:1) methods of
23、 test (IEC851);2) specifications (IEC317);3) packaging (IEC264).1 ScopeThis part of IEC317 specifies requirements of tape wrapped round copper winding wire of class240. The insulation consists of one or two wrappings of aromatic polyimide tape.Class240 is a thermal class that requires a temperature
24、index of at least240, and a heat shock temperature of at least260 C.NOTEIn some countries,e.g. Canada, Russia, USA, this product is assigned a class220.The tape is coated on one or both sides with a suitable adhesive, for instance, fluorinated ethylene propylene. After wrapping, the tape is heat-sea
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
本资源只提供5页预览,全部文档请下载后查看!喜欢就下载吧,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- EN60317431997ENSPECIFICATIONSFORPARTICULARTYPESOFWINDINGWIRESPART43AROMATICPOLYIMIDETAPEWRAPPEDROUNDCOPPERWIRECLASS240INCORPORATESAMENDMENTA12010
![提示](http://www.mydoc123.com/images/bang_tan.gif)
链接地址:http://www.mydoc123.com/p-717873.html