1、BSI Standards PublicationHousehold and similar electricalappliances SafetyPart 2-30: Particular requirements for room heatersBS EN 60335-2-30:2009+A11:2012Incorporating corrigendum March 2010BS EN 60335-2-30:2009+A11:2012Incorporating corrigenda March 2010 and November 2014BS EN 60335-2-30:2009+A11:
2、2012 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 60335-2-30:2009+A11:2012. It is identical to IEC 60335-2-30:2009, incorporating corrigenda March 2010 and November 2014. It supersedes BS EN 60335-3-30:2009, which will be withdrawn on 20 February 2015.The sta
3、rt and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CENELEC text carry the number of the CENELEC amendment. For example, text altered by CENELEC amendment A11 is indicated by .The UK participation in its preparation was entrusted by T
4、echnical Committee CPL/61, Safety of household and similar electrical appliances, to Subcommittee CPL/61/7, Safety of electrical appliances - Heated appliance group.A list of organizations represented on this subcommittee can be obtained on request to its secretary.This publication does not purport
5、to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2014. Published by BSI Standards Limited 2014ISBN 978 0 580 88994 3ICS 97.100.10Compliance with a British Standard cannot confer immunity from legal obligations
6、.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2010.Amendments/corrigenda issued since publicationDate Text affected31 May 2010 Implementation of CENELEC corrigendum March 2010. Replacement of sixth paragraph in CENELEC foreword.31
7、 May 2012 Implementation of CENELEC amendment A11:201230 November 2014 Implementation of IEC corrigendum November 2014: Table 101, replacement of second entry in second row of first columnEUROPEAN STANDARD EN 60335-2-30:2009+A11NORME EUROPENNE EUROPISCHE NORM CENELEC European Committee for Electrote
8、chnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: Avenue Marnix 17, B - 1000 Brussels 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN
9、 60335-2-30:2009 E ICS 13.120; 97.100.10 Supersedes EN 60335-2-30:2009English version Household and similar electrical appliances - Safety - Part 2-30: Particular requirements for room heaters (IEC 60335-2-30:2009) Appareils lectrodomestiques et analogues - Scurit - Partie 2-30: Rgles particulires p
10、our les appareils de chauffage des locaux (CEI 60335-2-30:2009) Sicherheit elektrischer Gerte fr den Hausgebrauch und hnliche Zwecke - Teil 2-30: Besondere Anforderungen fr Raumheizgerte (IEC 60335-2-30:2009) This European Standard was approved by CENELEC on 2009-12-01. CENELEC members are bound to
11、comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central
12、 Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same statu
13、s as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Pol
14、and, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Incorporating corrigendum March 2010March 2012 Supersedes EN 60335-2-30:2009Incorporating corrigenda March 2010 and November 2014- 2 - Foreword The text of document 61/3910/FDIS, future edition 5 of IEC 60
15、335-2-30, prepared by IEC TC 61, Safety of household and similar electrical appliances, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60335-2-30 on 2009-12-01. This European Standard supersedes EN 60335-2-30:2003 + A1:2004 + A2:2007. The principal changes in EN 603
16、35-2-30:2009 as compared with EN 60335-2-30:2003 are as follows (minor changes are not listed): some additional instructions are introduced for heaters without a built-in thermostat, or those installed in the floor or in a bathroom (7.12 and 7.12.1); a spillage test is introduced for appliances havi
17、ng a grille and that are built into the floor (15.2). The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2010-09-01 latest date by which the national standards conflicting with t
18、he EN have to be withdrawn (dow) 2014-12-01 This Part 2 has to be used in conjunction with EN 60335-1, Household and similar electrical appliances Safety Part 1: General requirements. It was established on the basis of the 2002 edition of that standard. Amendments and revisions of Part 1 have also t
19、o be taken into account and the dates when such changes become applicable will be stated in the relevant amendment or revision of Part 1. This Part 2 supplements or modifies the corresponding clauses of EN 60335-1, so as to convert it into the European Standard: Particular requirements for room heat
20、ers. When a particular subclause of Part 1 is not mentioned in this Part 2, that subclause applies. When this standard states “addition“, “modification“ or “replacement“, the relevant text of Part 1 is to be adapted accordingly. NOTE 1 The following numbering system is used: subclauses, tables and f
21、igures that are numbered starting from 101 are additional to those in Part 1; unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including those in a replaced clause or subclause; additional annexes are lettered AA, BB, etc.; subclauses, notes and an
22、nexes that are additional to those in the IEC standard are prefixed with the letter Z. NOTE 2 The following print types are used: requirements: in roman type; test specifications: in italic type; notes: in small roman type. Words in bold in the text are defined in Clause 3. When a definition concern
23、s an adjective, the adjective and the associated noun are also in bold. There are no special national conditions causing a deviation from this European Standard, other than those listed in Annex ZA to EN 60335-1. There are no national deviations from this European Standard, other than those listed i
24、n Annex ZB to EN 60335-1. p NOTE In this document, p is used in the margin to indicate instructions for preparing the printed version. _ BS EN 60335-2-30:2009+A11:2012 EN 60335-2-30:2009+A11:2012 (E)- 3 -Introduction p Add: An investigation by CENELEC TC 61 has shown that all risks from products wit
25、hin the scope of this standard are fully covered by the Low Voltage Directive, 2006/95/EC. For products having mechanical moving parts, a risk assessment in accordance with the Machinery Directive, 2006/42/EC, has shown that the risks are mainly of electrical origin and consequently this directive i
26、s not applicable. However, the relevant essential safety requirements of the Machinery Directive are covered by this standard together with the principal objectives of the Low Voltage Directive. _ Endorsement notice The text of the International Standard IEC 60335-2-30:2009 was approved by CENELEC a
27、s a European Standard without any modification. _ Bibliography p Add the following notes to the standards mentioned: IEC 60335-2-40 NOTE Harmonized as EN 60335-2-40:2003 (modified). IEC 60335-2-53 NOTE Harmonized as EN 60335-2-53:2003 (not modified). IEC 60335-2-61 NOTE Harmonized as EN 60335-2-61:2
28、003 (not modified). IEC 60335-2-71 NOTE Harmonized as EN 60335-2-71:2003 (modified). IEC 60335-2-81 NOTE Harmonized as EN 60335-2-81:2003 (not modified). IEC 60335-2-96 NOTE Harmonized as EN 60335-2-96:2002 (not modified). ISO 13732-1 NOTE Harmonized as EN ISO 13732-1:2008 (not modified). _ Foreword
29、 to amendment A11 This document (EN 60335-2-30:2009/A11:2012) has been prepared by CLC/TC 61 “Safety of household and similar electrical appliances“. The following dates are fixed: latest date by which this document has to be implemented at national level by publication of an identical national stan
30、dard or by endorsement (dop) 2013-02-20 latest date by which the national standards conflicting with this document have to be withdrawn (dow) 2015-02-20 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not
31、be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association. This amendment supplements or modifies the corresponding clauses of EN 60335-1:2012 and EN 60335-2-3
32、0:2009. There are no special national conditions causing a deviation from this amendment. There are no national deviations from this amendment. BS EN 60335-2-30:2009+A11:2012 EN 60335-2-30:2009+A11:2012 (E)- 4 - p Add: Annex ZC (normative) Normative references to international publications with thei
33、r corresponding European publications Addition: Publication Year Title EN/HD Year IEC 60335-2-5 (mod) A1 A2 2002 2005 2008 Household and similar electrical appliances - Safety - Part 2-5: Particular requirements for dishwashers EN 60335-2-5 A1 A2 + A11 2003 2005 2008 2009 IEC 60335-2-43 -1)Household
34、 and similar electrical appliances - Safety - Part 2-43: Particular requirements for clothes dryers and towel rails EN 60335-2-43 20032)IEC 60335-2-80 -1)Household and similar electrical appliances - Safety - Part 2-80: Particular requirements for fans EN 60335-2-80 20032)ISO 2758 -1)Paper - Determi
35、nation of bursting strength EN ISO 2758 20032)ISO 3864-1 -1)Graphical symbols - Safety colours and safety signs - Part 1: Design principles for safety signs in workplaces and public areas - - 1)Undated reference. 2)Valid edition at date of issue. BS EN 60335-2-30:2009+A11:2012 EN 60335-2-30:2009+A11
36、:2012 (E) 5 CONTENTS INTRODUCTION.6 1 Scope.7 2 Normative references .8 3 Definitions 8 4 General requirement.9 5 General conditions for the tests 9 6 Classification10 7 Marking and instructions.10 8 Protection against access to live parts13 9 Starting of motor-operated appliances 14 10 Power input
37、and current .14 11 Heating 14 12 Void17 13 Leakage current and electric strength at operating temperature17 14 Transient overvoltages .17 15 Moisture resistance 17 16 Leakage current and electric strength.17 17 Overload protection of transformers and associated circuits .17 18 Endurance17 19 Abnorma
38、l operation 17 20 Stability and mechanical hazards .21 21 Mechanical strength .21 22 Construction.22 23 Internal wiring.24 24 Components .24 25 Supply connection and external flexible cords 25 26 Terminals for external conductors.25 27 Provision for earthing .25 28 Screws and connections.25 29 Clear
39、ances, creepage distances and solid insulation 25 30 Resistance to heat and fire.25 31 Resistance to rusting26 32 Radiation, toxicity and similar hazards26 Annexes .29 Bibliography30 Figure 101 Examples of immediate surrounds of air-outlet grilles.27 Figure 102 Examples of the immediate surrounds of
40、 fireguards .28 Table 101 Temperature rises for surfaces 16 BS EN 60335-2-30:2009+A11:2012 EN 60335-2-30:2009+A11:2012 (E) 6 INTRODUCTION It has been assumed in the drafting of this International Standard that the execution of its provisions is entrusted to appropriately qualified and experienced pe
41、rsons. This standard recognizes the internationally accepted level of protection against hazards such as electrical, mechanical, thermal, fire and radiation of appliances when operated as in normal use taking into account the manufacturers instructions. It also covers abnormal situations that can be
42、 expected in practice and takes into account the way in which electromagnetic phenomena can affect the safe operation of appliances. This standard takes into account the requirements of IEC 60364 as far as possible so that there is compatibility with the wiring rules when the appliance is connected
43、to the supply mains. However, national wiring rules may differ. If an appliance within the scope of this standard also incorporates functions that are covered by another part 2 of IEC 60335, the relevant part 2 is applied to each function separately, as far as is reasonable. If applicable, the influ
44、ence of one function on the other is taken into account. When a part 2 standard does not include additional requirements to cover hazards dealt with in Part 1, Part 1 applies. NOTE 1 This means that the technical committees responsible for the part 2 standards have determined that it is not necessar
45、y to specify particular requirements for the appliance in question over and above the general requirements. This standard is a product family standard dealing with the safety of appliances and takes precedence over horizontal and generic standards covering the same subject. NOTE 2 Horizontal and gen
46、eric standards covering a hazard are not applicable since they have been taken into consideration when developing the general and particular requirements for the IEC 60335 series of standards. For example, in the case of temperature requirements for surfaces on many appliances, generic standards, su
47、ch as ISO 13732-1 for hot surfaces, are not applicable in addition to Part 1 or part 2 standards. An appliance that complies with the text of this standard will not necessarily be considered to comply with the safety principles of the standard if, when examined and tested, it is found to have other
48、features that impair the level of safety covered by these requirements. An appliance employing materials or having forms of construction differing from those detailed in the requirements of this standard may be examined and tested according to the intent of the requirements and, if found to be subst
49、antially equivalent, may be considered to comply with the standard. BS EN 60335-2-30:2009+A11:2012 EN 60335-2-30:2009+A11:2012 (E) 7 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES SAFETY Part 2-30: Particular requirements for room heaters 1 Scope This clause of Part 1 is replaced by the following. This European Standard deals with the safety of electric room heaters for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances a
