1、BRITISH STANDARD BS EN 60335-2-87:2002 +A1:2007 Household and similar electrical appliances Safety Part 2-87: Particular requirements for electrical animal-stunning equipment ICS 65.060.99 BS EN 60335-2-87:2002+A1:2007 This British Standard was published under the authority of the Standards Policy a
2、nd Strategy Committee on 19 February 2003 BSI 2008 ISBN 978 0 580 61205 3 National foreword This British Standard is the implementation of EN 60335-2-87:2002+A1:2007. It is identical with IEC 60335-2-87:2002, incorporating amendment 1:2007. It supersedes BS EN 60335-2-87:2002. The start and finish o
3、f text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to IEC text carry the number of the IEC amendment. For example, text altered by IEC amendment 1 is indicated by !“. The UK participation in its preparation was entrusted to Technical Committee CPL/61/
4、8, Farm equipment. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot
5、confer immunity from legal obligations. Amendments/corrigenda issued since publication Date Comments 29 February 2008 Implementation of IEC amendment 1:2007 with CENELEC endorsement A1:2007EUROPEAN STANDARD EN 60335-2-87:2002+A1 NORME EUROPENNE EUROPISCHE NORMJune 2007 CENELEC European Committee for
6、 Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
7、 Ref. No. EN 60335-2-87:2002 E ICS 65.060.99 Supersedes EN 60335-2-87:1999 English version Household and similar electrical appliances - Safety Part 2-87: Particular requirements for electrical animal-stunning equipment (IEC 60335-2-87:2002) Appareils lectrodomestiques et analogues - Scurit Partie 2
8、-87: Rgles particulires pour les appareils lectriques dinsensibilisation des animaux (CEI 60335-2-87:2002) Sicherheit elektrischer Gerte fr den Hausgebrauch und hnliche Zwecke Teil 2-87: Besondere Anforderungen fr elektrische Tierbetubungsgerte (IEC 60335-2-87:2002) This European Standard was approv
9、ed by CENELEC on 2002-09-24. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nation
10、al standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language
11、and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway,
12、 Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.Foreword The text of document 61H/167/FDIS, future second edition of IEC 60335-2-87, prepared by SC 61H of the IEC Technical Committee 61, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60335-2-87 on
13、 2002-09-24. This European Standard replaces EN 60335-2-87:1999. The following dates are applicable: - latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2003-07-01 - date on which national standards conflictin
14、g with the EN have to be withdrawn (dow) 2005-10-01 This part 2 has to be used in conjunction with EN 60335-1, Household and similar electrical appliances Safety Part 1: General requirements. It was established on the basis of the 2002 edition of that standard. Amendments and revisions of Part 1 hav
15、e also to be taken into account and the dates when such changes become applicable will be stated in the relevant amendment or revision of Part 1. This part 2 supplements or modifies the corresponding clauses of EN 60335-1, so as to convert it into the European Standard: Safety requirements for elect
16、ric animal-stunning equipment. When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies as far as is reasonable. When this standard states “addition“, “modification“ or “replacement“, the relevant text of Part 1 is to be adapted accordingly. NOTE 1 The following
17、numbering system is used: - subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1; - unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including those in a replaced clause or subclause; - additional ann
18、exes are lettered AA, BB, etc.; - subclauses, notes and annexes that are additional to those in the IEC standard are prefixed with the letter Z. NOTE 2 The following print types are used: - requirements: in roman type; - test specifications: in italic type; - notes: in small roman type. Words in bol
19、d in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the associated noun are also in bold. There are no special national conditions causing a deviation from this European Standard, other than those listed in Annex ZA to EN 60335-1. There are no national d
20、eviations from this European Standard, other than those listed in Annex ZB to EN 60335-1. _ Page2 BS EN 60335-2-87:2002+A1:2007Introduction An investigation by CENELEC TC 61 has shown that all risks from products within the scope of this standard are fully covered by the Low Voltage Directive, 73/23
21、/EEC. For products having mechanical moving parts, a risk assessment in accordance with the Machinery Directive, 98/37/EC, has shown that the risks are mainly of electrical origin and consequently this directive is not applicable. However, the relevant essential safety requirements of the Machinery
22、Directive are covered by this standard together with the principal objectives of the Low Voltage Directive. _ Endorsement notice The text of the International Standard IEC 60335-2-87:2002 was approved by CENELEC as a European Standard without any modification. _ p A:dd (ronitamve) vitamroNe wisnoita
23、cilbup naeporuE gnidnopserroc rieht ht noitiddA: cilbuPnoita Yrae iTtle DH/NE Yrae -86006 CEI-225 6991 rivnEmnoset latnet gni Patr2 :T ets sT etsK b:S altm its,yc lcic (smuidoc hrolis edo)noitul -86006 NE-225 6991 -85516 CEI-24 7991 faSeytfo wop rert snaformres,wop re sylppustinu s dna imrali raPt-2
24、 raP :4tciralur riuqeemstnef or sirt gnitalosnaformresf orreneg su lae -85516 NE-24 7991 OSI4683 - )1 faSeytc oruolss dna afeyts isng - - _)1 tadnu fer deecnere Page3 The text of document 61H/236/CDV, future amendment 1 to IEC 60335-2-87:2002, prepared by SC 61H, Safety of electrically operated farm
25、 appliances, of IEC Technical Committee 61, Safety of household and similar electrical appliances, was submitted to the IEC-CENELEC parallel unique acceptance procedure and was approved by CENELEC as amendment A1 to EN 60335-2-87:2002 on 2007-04-01. The following dates are applicable: - latest date
26、by which the amendment has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2008-01-01 - date on which national standards conflicting with the amendment have to be withdrawn (dow) 2010-04-01 This amendment supplements or modifies the corres
27、ponding clauses of EN 60335-2-87:2002. There are no special national conditions causing a deviation from this amendment. There are no national deviations from this amendment. _ Foreword to amendment A1 BS EN 60335-2-87:2002+A1:2007 Endorsement notice The text of amendment 1:2007 to the International
28、 Standard IEC 60335-2-87:2002 was approved by CENELEC as an amendment to the European Standard without any modification. _CONTENTS INTRODUCTION.5 1 Scope.6 2 Normative references .7 3 Definitions 7 4 General requirement.8 5 General conditions for the tests 8 6 Classification8 7 Marking and instructi
29、ons.9 8 Protection against access to live parts11 9 Starting of motor-operated appliances 11 10 Power input and current11 11 Heating.11 12 Void .12 13 Leakage current and electric strength at operating temperature12 14 Transient overvoltages .12 15 Moisture resistance 12 16 Leakage current and elect
30、ric strength.12 17 Overload protection of transformers and associated circuits .13 18 Endurance13 19 Abnormal operation 13 20 Stability and mechanical hazards13 21 Mechanical strength .13 22 Construction.14 23 Internal wiring.17 24 Components .17 25 Supply connection and external flexible cords 17 2
31、6 Terminals for external conductors.18 27 Provision for earthing .18 28 Screws and connections.18 29 Clearances, creepage distances and solid insulation19 30 Resistance to heat, and fire19 31 Resistance to rusting19 32 Radiation, toxicity and similar hazards19 Annexes .21 Bibliography. Erro!r Bokoam
32、rk not edenif.d Figure 101 Limiting resistance curve for stunning equipment .20 Page4 TNOCENTS TNIRODTCUOIN.5 1 Scope.6 2 Nromative referecnse .7 3 Dfeniiitosn 7 4 Gerenal reuqrimenet.8 5 Gerenal codnitoisn for eht tesst 8 6 Classficitaion8 7 Marking and snirtuctisno.9 8 Protectioga naisnt cacess to
33、 livrap est11 9 Startnifo g motor-operated paplaicnse 11 01 Porew inupa tnd curretn11 11 eHtaing.11 21 Void .21 31 eLkagae cruretn and elcertci strenght at operatnit gemrepatrue21 41 Trsnaeitn ovrevotlaseg .21 51 oMsiutre resistcnae 21 61 eLkagae current and elcertci srtenght.21 71 Ovreolad rptoceti
34、on fo rtansformres nad sasociatde circuist .31 81 Endurcnae31 91 Abnormla poretaion 31 02 tSability and mechnacial hazards31 12 ceMhnacial srtength .31 22 oCsnrtcuiton.41 32 nIretnal iwring.71 42 moCponenst .71 52 Supply connceiton and xeternal flxeibel cords 71 62 Termanils for xeternal conductros.
35、81 72 rPovsiiof nor raething .81 82 cSrews and conncetions.81 92 lCearacnse, creepage disatnces nad solid insulatino91 03 seRisatnce ot heata ,nd fire91 13 seRisatnce ot rusting91 23 aRdiatoinxot ,icity and simialr ahzards91 Annexes .21 Bibliorgaphy. Error! Bookmark not defined. iFugre 101 Limitign
36、resistcnac eurvf eor sutnning equimptne .02 4egaP 2002:78253306NE TNOCENTS TNIRODTCUOIN.5 1 Scope.6 2 Nromative referecnse .7 3 Dfeniiitosn 7 4 Gerenal reuqrimenet.8 5 Gerenal codnitoisn for eht tesst 8 6 Classficitaion8 7 Marking and snirtuctisno.9 8 Protectioga naisnt cacess to livrap est11 9 Star
37、tnifo g motor-operated paplaicnse 11 01 Porew inupa tnd curretn11 11 eHtaing.11 21 Void .21 31 eLkagae cruretn and elcertci strenght at operatnit gemrepatrue21 41 Trsnaeitn ovrevotlaseg .21 51 oMsiutre resistcnae 21 61 eLkagae current and elcertci srtenght.21 71 Ovreolad rptocetion fo rtansformres n
38、ad sasociatde circuist .31 81 Endurcnae31 91 Abnormla poretaion 31 02 tSability and mechnacial hazards31 12 ceMhnacial srtength .31 22 oCsnrtcuiton.41 32 nIretnal iwring.71 42 moCponenst .71 52 Supply connceiton and xeternal flxeibel cords 71 62 Termanils for xeternal conductros.81 72 rPovsiiof nor
39、raething .81 82 cSrews and conncetions.81 92 lCearacnse, creepage disatnces nad solid insulatino91 03 seRisatnce ot heata ,nd fire91 13 seRisatnce ot rusting91 23 aRdiatoinxot ,icity and simialr ahzards91 Annexes .12 Bibliography. Erro!r Bokoamrk not edenif.d iFugre 101 Limitign resistcnac eurvf eor
40、 sutnning equimptne .02 4egaP CONTENTS INTRODUCTION.5 1 Scope.6 2 Normative references .7 3 Definitions 7 4 General requirement.8 5 General conditions for the tests 8 6 Classification8 7 Marking and instructions.9 8 Protection against access to live parts11 9 Starting of motor-operated appliances 11
41、 10 Power input and current11 11 Heating.11 12 Void .12 13 Leakage current and electric strength at operating temperature12 14 Transient overvoltages .12 15 Moisture resistance 12 16 Leakage current and electric strength.12 17 Overload protection of transformers and associated circuits .13 18 Endura
42、nce13 19 Abnormal operation 13 20 Stability and mechanical hazards13 21 Mechanical strength .13 22 Construction.14 23 Internal wiring.17 24 Components .17 25 Supply connection and external flexible cords 17 26 Terminals for external conductors.18 27 Provision for earthing .18 28 Screws and connectio
43、ns.18 29 Clearances, creepage distances and solid insulation19 30 Resistance to heat, and fire19 31 Resistance to rusting19 32 Radiation, toxicity and similar hazards19 Annexes .21 Bibliography. Erro!r Bokoamrk not edenif.d Figure 101 Limiting resistance curve for stunning equipment .20 Page4 EN6033
44、5287:2002 BS EN 60335-2-87:2002+A1:2007INTRODUCTION It has been assumed in the drafting of this International Standard that the execution of its provisions is entrusted to appropriately qualified and experienced persons. This standard recognizes the internationally accepted level of protection again
45、st hazards such as electrical, mechanical, thermal, fire and radiation of appliances when operated as in normal use taking into account the manufacturers instructions. It also covers abnormal situations that can be expected in practice and takes into account the way in which electromagnetic This sta
46、ndard takes into account the requirements of IEC 60364 as far as possible so that there is compatibility with the wiring rules when the appliance is connected to the supply mains. However, national wiring rules may differ. If an appliance within the scope of this standard also incorporates functions
47、 that are covered by another part 2 of IEC 60335, the relevant part 2 is applied to each function separately, as far as is reasonable. If applicable, the influence of one function on the other is taken into account. This standard is a product family standard dealing with the safety of appliances and
48、 takes precedence over horizontal and generic standards covering the same subject. An appliance that complies with the text of this standard will not necessarily be considered to comply with the safety principles of the standard if, when examined and tested, it is found to have other features which
49、impair the level of safety covered by these requirements. An appliance employing materials or having forms of construction differing from those detailed in the requirements of this standard may be examined and tested according to the intent of the requirements and, if found to be substantially equivalent, may be considered to comply with the standard. Page5 BS EN 6
