1、Fixed capacitors for use in electronic equipmentPart 15: Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte (IEC 60384-15:2017)BS EN 60384-15:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARDNORME EUROPENNEEUROP
2、ISCHE NORMEN 60384-15September 2017ICS 31.060.40English VersionFixed capacitors for use in electronic equipment -Part 15: Sectional specification: Fixed tantalum capacitors withnon-solid or solid electrolyte(IEC 60384-15:2017)Condensateurs fixes utiliss dans les quipementslectroniques - Partie 15: S
3、pcification intermdiaire -Condensateurs fixes au tantale, lectrolyte non solide ou solide(IEC 60384-15:2017)Festkondensatoren zur Verwendung in Gerten derElektronik - Teil 15: Rahmenspezifikation - Tantal-Elektrolyt-Kondensatoren mit flssigem oder festem Elektrolyten(IEC 60384-15:2017)This European
4、Standard was approved by CENELEC on 2017-06-26. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references conc
5、erning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC me
6、mber into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,Denmark, Estonia, Finland, Former Yugoslav Republi
7、c of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,Switzerland, Turkey and the United Kingdom.European Committee for Electrotechnical Standardiza
8、tionComit Europen de Normalisation ElectrotechniqueEuropisches Komitee fr Elektrotechnische NormungCEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.Ref. No. EN 60384-15:2017 EN
9、ational forewordThis British Standard is the UK implementation of EN 60384-15:2017. It is identical to IEC 60384-15:2017. It supersedes BS QC 300200:1983 (dual numbered as IEC 60384-15:1982, QC 300200:1982).The UK participation in its preparation was entrusted to Technical Committee EPL/40X, Capacit
10、ors and resistors for electronic equipment.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standar
11、ds Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 88479 5ICS 31.060.40Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 October 2017.Am
12、endments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 60384-15:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60384-15 September 2017 ICS 31.060.40 English Version Fixed capacitors for use in electronic equipment - Part 15: Sectional specification: Fixed tanta
13、lum capacitors with non-solid or solid electrolyte (IEC 60384-15:2017) Condensateurs fixes utiliss dans les quipements lectroniques - Partie 15: Spcification intermdiaire - Condensateurs fixes au tantale, lectrolyte non solide ou solide (IEC 60384-15:2017) Festkondensatoren zur Verwendung in Gerten
14、der Elektronik - Teil 15: Rahmenspezifikation - Tantal-Elektrolyt-Kondensatoren mit flssigem oder festem Elektrolyten (IEC 60384-15:2017) This European Standard was approved by CENELEC on 2017-06-26. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the co
15、nditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard
16、 exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the
17、 national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland
18、 Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue M
19、arnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60384-15:2017 E BS EN 60384-15:2017EN 60384-15:2017 2 European foreword The text of document 40/2523/FDIS, future edition 2 of IEC 60384-15, prepared by
20、IEC/TC 40 “Capacitors and resistors for electronic equipment“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60384-15:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national s
21、tandard or by endorsement (dop) 2018-03-26 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-06-26 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held r
22、esponsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60384-15:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standar
23、d indicated: IEC 60068-2-54:2006 NOTE Harmonized as EN 60068-2-54:2006 (not modified). BS EN 60384-15:2017EN 60384-15:2017 2 European foreword The text of document 40/2523/FDIS, future edition 2 of IEC 60384-15, prepared by IEC/TC 40 “Capacitors and resistors for electronic equipment“ was submitted
24、to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60384-15:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-03-26 latest date by which the national
25、 standards conflicting with the document have to be withdrawn (dow) 2020-06-26 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice
26、 The text of the International Standard IEC 60384-15:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated: IEC 60068-2-54:2006 NOTE Harmonized as EN 60068-2-54:2006 (not
27、modified). EN 60384-15:2017 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For date
28、d references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-da
29、te information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60063 - Preferred number series for resistors and capacitors EN 60063 - IEC 60068-1 2013 Environmental testing - Part 1: General and guidance
30、EN 60068-1 2014 IEC 60068-2-6 - Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) EN 60068-2-6 - IEC 60068-2-14 - Environmental testing - Part 2-14: Tests - Test N: Change of temperature EN 60068-2-14 - IEC 60384-1 2016 Fixed capacitors for use in electronic equipment - Part
31、1: Generic specification EN 60384-1 2016 IEC 60417-DB - Graphical symbols for use on equipment - - IEC 61193-2 2007 Quality assessment systems - Part 2: Selection and use of sampling plans for inspection of electronic components and packages EN 61193-2 2007 ISO 3 - Preferred numbers - Series of pref
32、erred numbers - - BS EN 60384-15:2017 2 IEC 60384-15:2017 IEC 2017 CONTENTS FOREWORD . 5 1 General . 7 1.1 Scope . 7 1.2 Object . 7 1.3 Normative references 7 1.4 Information to be given in a detail specification . 8 1.4.1 General . 8 1.4.2 Outline drawing and dimensions 8 1.4.3 Mounting . 8 1.4.4 R
33、atings and characteristics 8 1.4.5 Marking . 9 1.5 Terms and definitions 9 1.6 Marking . 9 1.6.1 General . 9 1.6.2 Information for marking 10 1.6.3 Marking on capacitors 10 1.6.4 Marking on packaging 10 2 Preferred ratings and characteristics . 10 2.1 Preferred characteristics . 10 2.2 Preferred val
34、ues of ratings 10 2.2.1 Nominal capacitance (CN) 10 2.2.2 Tolerance on nominal capacitance . 11 2.2.3 Rated voltage (UR) 11 2.2.4 Category voltage (UC) 11 2.2.5 Reverse voltage . 11 2.2.6 Surge voltage (URSor UCS) . 11 2.2.7 Ripple (if required) . 11 2.2.8 Rated temperature . 12 3 Quality assessment
35、 procedures . 12 3.1 Primary stage of manufacture . 12 3.2 Structurally similar components 12 3.3 Certified test records of released lots 12 3.4 Qualification approval procedures . 12 3.4.1 General . 12 3.4.2 Qualification approval on the basis of the fixed sample size procedure 12 3.4.3 Tests . 13
36、3.5 Quality conformance inspection 20 3.5.1 Formation of inspection lots . 20 3.5.2 Test schedule 21 3.5.3 Delayed delivery 21 3.5.4 Assessment levels . 21 4 Test and measurement procedures 22 4.1 Visual inspection and check of dimensions . 22 4.2 Electrical tests 22 4.2.1 Leakage current . 22 4.2.2
37、 Capacitance 22 4.2.3 Tangent of loss angle (tan ) . 23 BS EN 60384-15:2017 2 IEC 60384-15:2017 IEC 2017 CONTENTS FOREWORD . 5 1 General . 7 1.1 Scope . 7 1.2 Object . 7 1.3 Normative references 7 1.4 Information to be given in a detail specification . 8 1.4.1 General . 8 1.4.2 Outline drawing and d
38、imensions 8 1.4.3 Mounting . 8 1.4.4 Ratings and characteristics 8 1.4.5 Marking . 9 1.5 Terms and definitions 9 1.6 Marking . 9 1.6.1 General . 9 1.6.2 Information for marking 10 1.6.3 Marking on capacitors 10 1.6.4 Marking on packaging 10 2 Preferred ratings and characteristics . 10 2.1 Preferred
39、characteristics . 10 2.2 Preferred values of ratings 10 2.2.1 Nominal capacitance (CN) 10 2.2.2 Tolerance on nominal capacitance . 11 2.2.3 Rated voltage (UR) 11 2.2.4 Category voltage (UC) 11 2.2.5 Reverse voltage . 11 2.2.6 Surge voltage (URSor UCS) . 11 2.2.7 Ripple (if required) . 11 2.2.8 Rated
40、 temperature . 12 3 Quality assessment procedures . 12 3.1 Primary stage of manufacture . 12 3.2 Structurally similar components 12 3.3 Certified test records of released lots 12 3.4 Qualification approval procedures . 12 3.4.1 General . 12 3.4.2 Qualification approval on the basis of the fixed samp
41、le size procedure 12 3.4.3 Tests . 13 3.5 Quality conformance inspection 20 3.5.1 Formation of inspection lots . 20 3.5.2 Test schedule 21 3.5.3 Delayed delivery 21 3.5.4 Assessment levels . 21 4 Test and measurement procedures 22 4.1 Visual inspection and check of dimensions . 22 4.2 Electrical tes
42、ts 22 4.2.1 Leakage current . 22 4.2.2 Capacitance 22 4.2.3 Tangent of loss angle (tan ) . 23 IEC 60384-15:2017 IEC 2017 3 4.2.4 Impedance (if required) 23 4.2.5 Insulation resistance of the external insulation (if required) 24 4.2.6 Voltage proof of the external insulation (if required) . 24 4.3 Ro
43、bustness of terminations . 25 4.3.1 General . 25 4.3.2 Initial inspection. 25 4.3.3 Test Ua1, Ub and Uc applicable. 25 4.3.4 Special bending test 25 4.4 Resistance to soldering heat . 26 4.4.1 General . 26 4.4.2 Conditions . 26 4.4.3 Final inspections and requirements 26 4.5 Solderability 26 4.5.1 G
44、eneral . 26 4.5.2 Test conditions 26 4.5.3 Final inspections and requirements 26 4.6 Rapid change of temperature 26 4.6.1 General . 26 4.6.2 Initial inspection. 27 4.6.3 Test conditions 27 4.6.4 Recovery . 27 4.6.5 Final inspections and requirements 27 4.7 Vibration . 27 4.7.1 General . 27 4.7.2 Tes
45、t condition 27 4.7.3 Final inspections and requirements 27 4.8 Bump 27 4.8.1 General . 27 4.8.2 Mounting . 28 4.8.3 Test conditions 28 4.8.4 Final inspections and requirements 28 4.9 Shock . 28 4.9.1 General . 28 4.9.2 Mounting . 28 4.9.3 Test conditions 28 4.9.4 Final inspections and requirements 2
46、9 4.10 Climatic sequence. 29 4.10.1 General . 29 4.10.2 Initial inspection. 29 4.10.3 Dry heat 29 4.10.4 Damp heat, cyclic, Test Db, first cycle . 29 4.10.5 Cold. 29 4.10.6 Low air pressure (if required) . 29 4.10.7 Damp heat, cyclic, Test Db, remaining cycles 29 4.10.8 Recovery . 29 4.10.9 Sealing
47、if required) . 30 4.10.10 Final inspections and requirements 30 4.11 Damp heat, steady state . 30 4.11.1 General . 30 BS EN 60384-15:2017 4 IEC 60384-15:2017 IEC 2017 4.11.2 Initial inspection. 30 4.11.3 Final inspections and requirements 30 4.12 Endurance 30 4.12.1 General . 30 4.12.2 Initial insp
48、ection. 30 4.12.3 Test conditions 30 4.12.4 Recovery . 31 4.12.5 Final inspections and requirements 31 4.13 Surge voltage . 31 4.13.1 General . 31 4.13.2 Initial inspection. 31 4.13.3 Test conditions 31 4.13.4 Final inspections and requirements 31 4.14 Reverse voltage (if required) . 32 4.14.1 Gener
49、al . 32 4.14.2 Initial inspection. 32 4.14.3 Test conditions 32 4.14.4 Final inspections and requirements 32 4.15 Characteristics at high and low temperature 32 4.15.1 General . 32 4.15.2 Final inspections and requirements 32 4.16 Charge and discharge (if required) 32 4.16.1 General . 32 4.16.2 Initial inspection. 32 4.16.3 Test conditions 33 4.16.4 Recovery . 33 4.16.5 Final inspections and requirements 33 4.17 Component solvent resistance 33 4.18 Solvent resistance of the marking . 33 4.19 High surge current (if
