1、BRITISH STANDARD Pressure-sensitive adhesive tapes for electrical purposes Part 3 : Specifications for individual materials - Sheet 1: PVC film tapes with pres sure-sensitive adhesive The European Standard EN 60454-3-1: 1998, with the incorporation of amendment A1:2001, has the status ofa British St
2、andard ICs 29.035.20 BS EN IEC 60454-3 - 1 1998 60454-3 - 1 1998 Incovorating Amendment No. I WkNb A%“ U- rn% E rn NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW $ -present to the responsible internationalEuropean committee any enquiries on the interpretation, or proposals fo
3、r change, and keep the UK interests informed; -monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this subcommittee can be obtained on request to its secretary. From 1 January 1997, all IEC publications have the number 60000
4、added to the old number. For instance, IEC 27-1 has been renumbered as IEC 60027-1. For a period oftime during the change over from one numbering system to the other, publications may contain identifiers from both systems. NOTE BS 3924: 1978, SpeciJication forpressure-sensitive adhesive tapes for el
5、ectrical insulating puoses, will be withdrawn after Sheets 1 to 19 (inc1usive)ofBS EN 60454-3 have been published. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled ?
6、International Standards Correspondence Index?, or by using the ?Search? facility of the BSIElectronic Catalogue or of British Stan dards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with
7、 a British Standard does not ofitself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 7 and a back cover. The BSI copyright notice displayed in this document indicates when the docume
8、nt was last issued. Amendments issued since publication OBSI 17 June 2002 ISBN O 580 30032 3 BS EN 60454-3-1 11998 Contents National foreword Page Inside front cover Foreword Text of EN 60454-3-1 2 3 i O BSI 17 June 2002 11 blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60454-3-1 April 1
9、998 +Al July 2001 ICs 29.035.20 Descriptors: Solid electrical insulating materials, adhesive tapes, polyvinyl chloride, specifications, designation, classifications, characteristics, tests, thermal endurance tests, marking, packing English version Pressure-sensitive adhesive tapes for electrical pur
10、poses - Part 3: Specifications for individual materials - Sheet 1: PVC film tapes with pressure-sensitive adhesive (includes amendment A1:200 1) OEC 60454-3-111998 +A1:2001) Rubans adhsifs sensibles la pression usages lectriques - Partie 3: Spcifications pour matriaux particuliers - Feuille 1: Ruban
11、s en PVC avec un adhsif sensible la pression (inclut lamendement Al :2001) (CE1 60454-3-111998 + A112001) Selbstklebende Bnder fr elektrotechnische Anwendungen - Teil 3: Bestimmungen fr einzelne Materialien - Blatt 1: Anforderungen fr selbstklebende Bnder aus PVC-Folie (enthlt nderung A1:2001) (IEC
12、60454-3-111998 + A112001) This European Standard was approved by CENELEC on 1998-04-01; amendment Al was approved by CENELEC on 2001-07-01. CENELEC members are bound to comply with the CENKENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a na
13、tional standard without any alteration. Up-tedate lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version
14、in any other language made by translation under the responsibility ofa CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark,
15、 Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnisc
16、he Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels O 1998 CENELEC -Ail rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref No. EN 60454-3-1:1998 +A1:2001 E EN 60454-3-1 1998 Fore word The text of document 15C/85 l/FDIS, fture edition 2 of
17、IEC 60454-3-1, prepared by SC 15C, Specifications, of IEC TC 15, Insulating materials, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60454-3-1 on 1998-04-01. The following dates were fixed: - latest date by which the EN has to be implemented at national level by pu
18、blication of an identical national standard or by - latest date by which the national standards conflicting with the EN have to be withdrawn endorsement (dq) 1999-0 1-0 1 (dow) 2001-01-01 Annexes designated “normative” are part of the body of the standard. In this standard, Annex ZA is normative Ann
19、ex ZA has been added by CENELEC. Endor sement notice The text of the International Standard IEC 60454-3-1:1998 was approved by CENELEC as a European Standard without any modification. Foreword to amendment Al The text of document 15C/1171/FDIS, future amendment 1 to IEC 60454-3-1:1998, prepared by S
20、C 15C, Specifications, of IEC TC 15, Insulating materials, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment Al to EN 60454-3-1:1998 on 200 1-07-0 1. The following dates were fixed: - latest date by which the amendment has to be implemented at national level by
21、publication of an identical national standard or by - latest date by which the national standards conflicting with the amendment have to be endorsement (dq) 2002-04-0 1 with drawn (dw) 2004-07-0 1 Endor sement notice The text ofamendment 1:2001 to the International Standard IEC 60454-3-1:1998 was ap
22、proved by CENELEC as an amendment to the European Standard without any modification. Contents Page Foreword 2 Introduction 3 1 General 3 1.1 Scope 3 1.2 Normative references 3 1.3 Definitions 3 2 Classification and designation 3 3 Requirements 4 5 Marking, labelling and packaging 5 corresponding Eur
23、opean publications 7 Table 1 - Requirements for all types 4 Test methods 5 Annex ZA (normative) Normative references to international publications with their 5 6 Table 2 - Performance at low temperatures 2 OBSI 17 June 2002 EN 60454-3-1 1998 Introduction This International Standard is one ofa series
24、 which deals with pressure-sensitive adhesive tapes, intended primarily for electrical purposes. The series consists ofthree parts: -Part I: General requirements (7EC 60454-I); -Part 2: Methods of test (7EC 60454-2); -Part 3: SpeciJications for individual materials (7EC 60454-3). This standard conta
25、ins one of the sheets comprising part 3 as follows: Sheet 1 : PVC film tapes with pressure-sensitive adhesive. 1 General 1.1 Scope This sheet of IEC 60454-3 contains the requirements for PVC film tapes with pressure-sensitive adhesive. Materials which conform to this specification meet established l
26、evels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application, and not based on this specification alone. 1.2 Normative references The foliowing normative documents con
27、tain provisions which, through reference in this text, constitute provisions of this sheet of IEC 60454-3. At the time of publication, the editions indicated were valid. Ail normative documents are subject to revision and parties to agreements based on this sheet ofIEC 60454-3 are encouraged to inve
28、stigate the possibility of applying the most recent editions of the normative documents indicated belowl). Members of IEC and IS0 maintain registers of currently valid International Stan dards . IEC 60426: 1973, Test methods for determining electrolytic corrosion with insulating materials. IEC 60454
29、- 1 : 1992, Pressure-sensitive adhesive tapes for electricalpuvoses -Part I: General requirements. IEC 60454-2: 1994, Pressure-sensitive adhesive tapes fw electricalpuvoses -Part 2: Methodr of test. 1.3 Definitions Refer to IEC 60454-1 for definitions applicable to these materials. 2 Classification
30、and designation 2.1 The products supplied according to this specification shall be classified as follows. Type 1: Type 2: Type 3: Type 4: Type 5: Type 6: Type 7: Type 8: Type 9: Type 10: Products having a thermal index of 105 and a minimum temperature rating of-10 “C. Type 11: Products having a ther
31、mal index of 105 and a minimum temperature rating of-18 “C. Type 12: Products having a thermal index of 105 and a minimum temperature rating of-33 “C. Products having a thermal index of 60 and a minimum temperature rating of O “C. Products having a thermal index of 60 and a minimum temperature ratin
32、g of -10 “C. Products having a thermal index of60 and a minimum temperature rating of-18 “C. Products having a thermal index of 60 and a minimum temperature rating of -33 “C. Products having a thermal index of 90 and a minimum temperature rating of O “C. Products having a thermal index of 90 and a m
33、inimum temperature rating of-10 “C. Products having a thermal index of 90 and a minimum temperature rating of-18 “C. Products having a thermal index of 90 and a minimum temperature rating of -33 “C. Products having a thermal index of 105 and a minimum temperature rating of O “C. 1) In case of disput
34、e, the reference edition is applicable. 3 O BSI 17 June 2002 EN 60454-3-1 1998 2.2 The products shall be designated for ordering purposes as follows: Type 1: IEC 60454-3-1-1/F-PVCP/60. Type 2: IEC 60454-3-1-2/F-PVCP/60. Type 3: IEC 60454-3-1-3/F-PVCP/60. Type 4: IEC 60454-3-1-4/F-PVCP/60. Type 5: IE
35、C 60454-3-1-5/F-PVCP/90. Type 6: IEC 60454-3-1-6/F-PVCP/90. Type 7: IEC 60454-3-1-7/F-PVCP/90. Type 8: IEC 60454-3-1-8/F-PVCP/90. Type 9: IEC 60454-3-1-9/F-PVCP/l05. Type 1 O : IEC 60454-3 - 1 - 1 O/F-PVCP/ 1 05. Type 11: IEC 60454-3-1-1 l/F-PVCP/lOS. Type 12: IEC 60454-3-1-12/F-PVCP/lO5. NOTE this
36、specification. Adhesive types may be specified based on agreement between purchaser and supplier. The nature of the adhesive is not classified, since several classes of adhesive may satisfy the performance requirements of 3 Requirements 3.1 All applicable requirements of IEC 60454-1 shall apply to m
37、aterial furnished under this specification. 3.2 The physical and electrical properties of products supplied according to this specification shall be within the limits listed in Table 1 and Table 2 when tested in accordance with the test methods listed therein. 3.3 Thermal endurance When required by
38、the purchaser, the manufacturer shall provide evidence that when tested in accordance with clause 21 ofIEC 60454-2, the product shall have a temperature index ofnot less than 60 for types 1, 2, 3 and 4; not less than 90 for types 5, 6, 7 and 8; and not less than 105 for types 9, 10, 11 and 12. The e
39、xposure temperatures are: -85 OC, 100 “C and 120 “C for types 1 to 4; - 100 OC, 110 “C and 120 “C for types 5 to 8; - 120 OC, 130 “C and 140 “C for types 9 to 12. -for breakdown voltage: 2,5 kV (metal foil electrode). -for breakdown voltage: 2,5 kV (metal foil electrode); and -for loss of mass: 20 Y
40、a The single end-point criterion for types 1 to 4 shall be: The two end-point criteria for types 5 to 12 shall be: 3.4 When required by the purchaser, the manufacturer shall provide evidence of the low temperature performance when tested in accordance with the conditions specified in Table 2; the ta
41、pe shall have a minimum temperature rating as follows: Types 1, 5, 9: O “C. Types 2,6, 10: -10 “C. Types 3,7, 11: -18 “C. Types 4, 8, 12: -33 “C. 4 OBSI 17 June 2002 EN 60454-3-1 1998 Width Length Electrolytic corrosion: -insulation resistance after 24 h at (23 f 2) “C and (93 f 2) YO relative humid
42、ity; or - pH of water extract; and 4 Test methods AU tests shall be conducted in accordance with the appropriate clauses and subclauses of IEC 60454-2. 5 Marking, labelling and packaging Unless otherwise specified, all marking, labelling and packaging shall be in accordance with the requirements of
43、IEC 60454-1. Table 1 - Requirements for all types 5 6 7.5 7.1 to 7.2 of IEC 60454-2 ensile strength 8 -conductivity; or -visual method. Low temperature properties (see Table 2 for test temperatures): - flexibility; -electric breakdown. 7.3 7.6 9 9.4 9.5 Adhesion to steel Adhesion to backing I Elonga
44、tion at break 18 11 11 Adhesion at low temperature (see Table 2 for test temperatures) Shear adhesion to backing after water immersion Penetration at elevated temperature 12 13 -at room temperature; -after humid conditioning. b Flammability: -resistance to flame propagation; -flame test. or hermal e
45、ndurance 17 18 19 20 21 I Electric strength : Units mm mm m CY25 mm width mS/m N/1 O mm width YO “C N/1 O mm width N/1 O mm width N/1 O mm width N kV/mm kV/mm NOTE The criteria for flame retardant are described in 20.1 of IEC 60454-2. a Requirements Nominal value per manufacturer %0,025 mm or *15 YO
46、 whichever is greater 7.2.1 OfIEC 60454-1 7.3 Of IEC 60454-1 1 X 1011 minimum 2,5 maximum Grade shall be at least as good as AA3 1,8 (see Table 1 of IEC 60426) 150 minimum per millimetre of tape thickness 125 minimum 5,5 - 8,O No cracking, no unwinding No breakdown 50 minimum 1,8 minimum 1,5 minimum
47、 1,5 minimum 18 minimum 40 minimum 35 minimum Non-ignitable or self-extinguishing Flame retardant (see note) See 3.3 5 O BSI 17 June 2002 EN 60454-3-1 1998 Assigned low temperature Temperature per clause 9 of IEC 60454-2 o “c -10 “c -18 “C -33 “c (-3 * 1) “c (-18 * 1) “C (-26 * 1) “C (-40 * 1) “c Te
48、mperature per clause 12 of IEC 60454-2 (O * 1) “c (-10 * 1) “c (-18 * 1) “C (-18 * 1) “C 6 OBSI 17 June 2002 EN 60454-3-1 1998 Annex ZA (normative) Normative references to international publications with their corresponding European publications This European Standard incorporates by dated or undate
49、d reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions ofany ofthese publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). NOTE applies. When an international publication has been modified by common modifications, indicated by (m
