EN 60675-1995 en Household Electric Direct-Acting Room Heaters Methods for Measuring Performance (Incorporates Amendment A1 1998)《家用电直接式房间加热器 性能测量方法 包含修改件A1-1998 IEC 675-1994+A1-19.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS EN 20105-N01-1995 Textiles - Tests for colour fastness - Colour fastness to bleaching hypochlorite《纺织品的色牢度试验 第N01部分 耐褪色牢度 次氯酸盐试验方法》.pdf

BS EN 20187-1993 Paper board and pulps - Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples《纸、纸板和纸浆 调整和测试用标准大气.pdf

BS EN 20273-1992 Fasteners - Clearance holes for bolts and screws《紧固件 螺栓和螺钉自由尺寸孔》.pdf

BS EN 20693-1992 Dimensions of seam welding wheel blanks《缝焊盘状坯料尺寸》.pdf

BS EN 20865-1992 Slots in platens for projection welding machines《凸焊机台板槽》.pdf

BS EN 20898-7-1995 Mechanical properties of fasteners - Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm《紧固件机械性能 标称直径为1MM到10MM的螺栓和螺钉的扭转试.pdf

BS EN 21089-1992 Electrode taper fits for spot welding equipment - Dimensions《点焊设备用电极锥度接头 尺寸》.pdf

BS EN 21864-1994 Information technology - Unrecorded 12 7 mm (0 5 in) wide magnetic tape for information interchange - 32 ftpmm (800 ftpi) NRZ1 126 ftpmm (3 200 ftpi) phase encoded.pdf

BS EN 22206-1988 Complete filled transport packages - Method for identifying parts when testing《整包运输包装件 在试验时各部件的识别方法》.pdf