1、BSI Standards PublicationPhotovoltaic devicesPart 2: Requirements for photovoltaic reference devicesBS EN 60904-2:2015National forewordThis British Standard is the UK implementation of EN 60904-2:2015. It isidentical to IEC 60904-2:2015. It supersedes BS EN 60904-2:2007 which iswithdrawn.The UK part
2、icipation in its preparation was entrusted to TechnicalCommittee GEL/82, Photovoltaic Energy Systems.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are resp
3、onsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 85971 7ICS 27.160Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards P
4、olicy and Strategy Committee on 31 July 2015.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 60904-2:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60904-2 March 2015 ICS 27.160 Supersedes EN 60904-2:2007 English Version Photovoltaic devices - Part 2:
5、Requirements for photovoltaic reference devices (IEC 60904-2:2015) Dispositifs photovoltaques - Partie 2: Exigences applicables aux dispositifs photovoltaques de rfrence (IEC 60904-2:2015) Photovoltaische Einrichtungen - Teil 2: Anforderungen an Referenz-Solarelemente (IEC 60904-2:2015) This Europea
6、n Standard was approved by CENELEC on 2015-02-27. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references c
7、oncerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELE
8、C member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav R
9、epublic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardiz
10、ation Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60904-2:201
11、5 E BS EN 60904-2:2015EN 60904-2:2015 - 2 - Foreword The text of document 82/893/FDIS, future edition 3 of IEC 60904-2, prepared by IEC/TC 82 “Solar photovoltaic energy systems“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60904-2:2015. The following dates are fixed:
12、latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2015-11-27 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2018-02-27 This document supersedes EN 60
13、904-2:2007. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60904-2:2015
14、 was approved by CENELEC as a European Standard without any modification. BS EN 60904-2:2015- 3 - EN 60904-2:2015 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively refer
15、enced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modif
16、ications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60891 - Photovoltaic devices - Procedures for temperature and irradia
17、nce corrections to measured I-V characteristics EN 60891 - IEC 60904-1 - Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics EN 60904-1 - IEC 60904-3 - Photovoltaic devices - Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with re
18、ference spectral irradiance data EN 60904-3 - IEC 60904-4 - Photovoltaic devices - Part 4: Reference solar devices - Procedures for establishing calibration traceability EN 60904-4 - IEC 60904-5 - Photovoltaic devices - Part 5: Determination of the equivalent cell temperature (ECT) of photovoltaic (
19、PV) devices by the open-circuit voltage method EN 60904-5 - IEC 60904-7 - Photovoltaic devices - Part 7: Computation of the spectral mismatch correction for measurements of photovoltaic devices EN 60904-7 - IEC 60904-8 - Photovoltaic devices - Part 8: Measurement of spectral response of a photovolta
20、ic (PV) device EN 60904-8 - IEC 60904-9 - Photovoltaic devices - Part 9: Solar simulator performance requirements EN 60904-9 - IEC 60904-10 - Photovoltaic devices - Part 10: Methods of linearity measurement EN 60904-10 - IEC/TS 61836 - Solar photovoltaic energy systems - Terms, definitions and symbo
21、ls CLC/TS 61836 - BS EN 60904-2:2015 2 IEC 60904-2:2015 IEC 2015 CONTENTS FOREWORD . 3 1 Scope 5 2 Normative references. 5 3 Terms and definitions 5 4 Selection of reference device . 7 4.1 General requirements 7 4.2 Additional requirements for single reference cell in a multi-cell package . 8 4.3 Ad
22、ditional requirements for reference modules 8 4.4 Requirements for built-in shunt resistors 8 5 Temperature measurement 9 6 Electrical connections 9 7 Calibration . 9 8 Report . 10 9 Marking . 11 10 Packaging . 11 10.1 Recommended packaging for use in natural sunlight 11 10.2 Recommended packaging f
23、or use under solar simulators . 11 10.3 Single cell package . 11 11 Care of reference devices 12 12 Calibration of secondary reference devices against a primary reference cell . 12 12.1 General . 12 12.2 Natural sunlight . 12 12.3 Simulated sunlight . 13 12.4 Test procedure 13 13 Calibration of work
24、ing reference device against a secondary reference device 14 Bibliography . 15 Figure 1 Single-cell package 6 Figure 2 Single reference cell in a multi-cell package 8 BS EN 60904-2:2015IEC 60904-2:2015 IEC 2015 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ PHOTOVOLTAIC DEVICES Part 2: Requirements f
25、or photovoltaic reference devices FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions
26、 concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”)
27、. Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collabora
28、tes closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on th
29、e relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure tha
30、t the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the m
31、aximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodi
32、es provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to
33、IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
34、expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9)
35、Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60904-2 has been prepared by IEC Technical Committee 82: Solar phot
36、ovoltaic energy systems. This third edition cancels and replaces the second edition, published in 2007. It constitutes a technical revision. The main technical changes with regard to the previous edition are as follows: addition of a test procedure in simulated sunlight of subsequent measurement of
37、primary and secondary reference device; definition of standard test conditions; reduction of allowed diffuse component for secondary reference cell calibration to 20 %. BS EN 60904-2:2015 4 IEC 60904-2:2015 IEC 2015 The text of this standard is based on the following documents: FDIS Report on voting
38、 82/893/FDIS 82/918/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 60904 series, published unde
39、r the general title Photovoltaic devices, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At thi
40、s date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. BS EN 60904-2:2015IEC 60904-2:2015 IEC 2015 5 PHOTOVOLTAIC DEVICES Part 2: Requirements for photovoltaic reference devices 1 Scope This part of IEC 60904 gives requirements for the classification, sele
41、ction, packaging, marking, calibration and care of photovoltaic reference devices. This standard covers photovoltaic reference devices used to determine the electrical performance of photovoltaic cells, modules and arrays under natural and simulated sunlight. It does not cover photovoltaic reference
42、 devices for use under concentrated sunlight. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition o
43、f the referenced document (including any amendments) applies. IEC 60891, Photovoltaic devices Procedures for temperature and irradiance corrections to measured I-V characteristics IEC 60904-1, Photovoltaic devices Part 1: Measurements of photovoltaic current-voltage characteristics IEC 60904-3, Phot
44、ovoltaic devices Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data IEC 60904-4, Photovoltaic devices Part 4: Reference solar devices Procedures for establishing calibration traceability IEC 60904-5, Photovoltaic devices Part 5: Det
45、ermination of the equivalent cell temperature (ECT) of photovoltaic (PV) devices by the open-circuit voltage method IEC 60904-7, Photovoltaic devices Part 7: Computation of the spectral mismatch correction for measurements of photovoltaic devices IEC 60904-8, Photovoltaic devices Part 8: Measurement
46、 of spectral responsivity of a photovoltaic (PV) device IEC 60904-9, Photovoltaic devices Part 9: Solar simulator performance requirements IEC 60904-10, Photovoltaic devices Part 10: Methods of linearity measurement IEC TS 61836, Solar photovoltaic energy systems Terms, definitions and symbols 3 Ter
47、ms and definitions For the purposes of this document, the terms and definitions given in IEC TS 61836 and the following apply. BS EN 60904-2:2015 6 IEC 60904-2:2015 IEC 2015 3.1 calibration traceability traceability as defined in IEC 60904-4 Note 1 to entry: Photovoltaic reference devices are distin
48、guished by their position in a chain of calibration traceability. 3.2 primary reference device photovoltaic reference device whose calibration is based on a radiometer or standard detector or standard light source traceable to SI units as defined in IEC 60904-4 3.3 secondary reference device photovo
49、ltaic reference device calibrated in natural or simulated sunlight against a primary reference device 3.4 working reference device photovoltaic reference device calibrated in natural or simulated sunlight against a secondary reference device 3.5 reference devices specially calibrated photovoltaic devices which are used to measure natural or simulated irradiance or to set simulator irradiance levels for measuring the performance of other photovoltaic devi
