EN 61067-3-1-1995 en Glass and Glass Polyester Fibre Woven Tapes Part 3 Specifications for Individual Materials Sheet 1 Type 1 2 and 3 Tapes《玻璃和玻璃聚酯纤维编织带规范 第3部分 各型材料规范 第1节 1 2 3型织带.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AGMA 07FTM14-2007 Roughness and Lubricant Chemistry Effects in Micropitting《微点蚀的粗糙度和润滑剂化学影响》.pdf

AGMA 07FTM15-2007 Experience with a Disc Rig Micropitting Test《带盘型钻机微点蚀测试的试验》.pdf

AGMA 07FTM16-2007 Straight Bevel Gear Cutting and Grinding on CNC Free Form Machines《CNC自由形式机械上直齿锥齿轮的切割和磨削》.pdf

AGMA 07FTM17-2007 Simulation Model for the Emulation of the Dynamic Behavior of Bevel Gears《锥齿轮动态行为模拟用仿真模型》.pdf

AGMA 07FTM18-2007 Bevel Gear Model《锥齿轮模型》.pdf

AGMA 07FTM19-2007 How to Determine the MTBF of Gearboxes《如何确定齿轮箱的MTBF》.pdf

AGMA 08FTM01-2008 Parametric Study of the Failure of Plastic Gears《塑料齿轮故障的参数研究法》.pdf

AGMA 08FTM02-2008 A Methodology for Identifying Defective Cycloidal Reduction Components Using Vibration Analysis and Techniques《使用振动分析和技术鉴别不良摆线减速组件的方法》.pdf

AGMA 08FTM03-2008 Effects of Gear Surface Parameters on Flank Wear《齿轮表面参数在隙面磨耗上的影响》.pdf