1、BRITISH STANDARDBS EN 61169-2:2007Radio-frequency connectors Part 2: Sectional specification Radio frequency coaxial connectors of type 9,52The European Standard EN 61169-2:2007 has the status of a British StandardICS 31.220.10g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g5
2、3g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 61169-2:2007This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 May 2007 BSI 2007ISBN 978 0 580 50821 9Nationa
3、l forewordThis British Standard was published by BSI. It is the UK implementation of EN 61169-2:2007. It is identical with IEC 61169-2:2007. It supersedes BS EN 61169-2:2002 which is withdrawn. The UK participation in its preparation was entrusted by Technical Committee EPL/46, Cables, wires and wav
4、eguides, radio frequency connectors and accessories for communication and signalling, to Subcommittee EPL/46/2, Radio frequency connectors and waveguides.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all
5、 the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.Amendments issued since publicationAmd. No. Date CommentsEUROPEAN STANDARD EN 61169-2 NORME EUROPENNE EUROPISCHE NORM March 2007
6、 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2007 CENELEC - All rights of exploitation in any form and by any means reserved
7、 worldwide for CENELEC members. Ref. No. EN 61169-2:2007 E ICS 31.220.10 Supersedes EN 61169-2:2001English version Radio-frequency connectors - Part 2: Sectional specification - Radio frequency coaxial connectors of type 9,52 (IEC 61169-2:2007) Connecteurs pour frquences radiolectriques - Partie 2:
8、Spcification intermdiaire - Connecteurs pour frquences radiolectriques de srie 9,52 (CEI 61169-2:2007) Hochfrequenz-Steckverbinder - Teil 2: Rahmenspezifikation - Koaxiale Hochfrequenzsteckverbinder Typ 9,52 (IEC 61169-2:2007) This European Standard was approved by CENELEC on 2007-03-01. CENELEC mem
9、bers are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on applicat
10、ion to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat
11、has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Nether
12、lands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Foreword The text of document 46F/56/FDIS, future edition 2 of IEC 61169-2, prepared by SC 46F, R.F. and microwave passive components, of IEC TC 46, Cables, wires, waveguides, R.F. connec
13、tors, R.F. and microwave passive components and accessories, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61169-2 on 2007-03-01. This European Standard supersedes EN 61169-2:2001. The main change introduced in EN 61169-2:2007 is that the maximum frequency is now 3
14、 GHz. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2007-12-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2010-03-01 Anne
15、x ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 61169-2:2007 was approved by CENELEC as a European Standard without any modification. _ 2 EN 61169-2:2007CONTENTS 1 Scope.4 2 Normative references .4 3 Interface dimensions 4 3.1 Interface4 3.2 Mechanical
16、 gauges8 4 Quality assessment procedures9 4.1 General .9 4.2 Ratings and characteristics .9 4.3 Test schedule and inspection requirements .11 4.4 Procedures13 5 Instructions for preparation of detail specifications .13 5.1 General .13 5.2 Identification of the detail specification 13 5.3 Identificat
17、ion of the component14 5.4 Performance14 5.5 Marking, ordering information and related matters.14 5.6 Selection of tests, test conditions and severities14 5.7 Blank detail specification pro-forma for type 9,52 connector 15 Figure 1a Sliding male connector.5 Figure 1b Sliding female connector 5 Figur
18、e 1 Sliding connector .5 Figure 2a Screw coupling male connector6 Figure 2b Screw coupling female connector .6 Figure 2 Screw coupling connector 6 Figure 3a Standard test male connector.7Figure 3b Standard test female connector7 Figure 3 Standard test connectors .7 Figure 4 Gauge pins for outer cont
19、act of socket connector.8 Figure 5 Gauge pins for centre contact of socket connector .9 Table 1 Ratings and characteristics .10 Table 2 Acceptance tests.11 Table 3 Periodic tests 12 3 EN 61169-2:2007Annex ZA (normative) Normative references to international publications with their corresponding Euro
20、pean publications 20RADIO-FREQUENCY CONNECTORS Part 2: Sectional specification Radio frequency coaxial connectors type 9,52 1 Scope This part of IEC 61169, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for RF coaxial connect
21、ors of type 9,52. It describes the interface dimensions for general purpose grade 2 connectors, dimensional details for standard test connectors, grade 0, together with gauging information and the mandatory tests selected from IEC 61169-1, applicable to all DS relating to type 9,52 connectors. This
22、specification indicates the recommended performance characteristics to be considered when writing a DS and covers test schedules and inspection requirements. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only t
23、he edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 61169-1:1992, Radio-frequency connectors Part 1: Generic specification General requirements and measuring methods 3 Interface dimensions 3.1 Interface 3.1.1 General
24、 All dimensions are in millimetres. All undimensioned pictorial configurations are for reference purposes only. 3.1.2 Dimensions Figures 1, 2 and 3 provide dimensions for sliding connectors, screw coupling connectors and standard test connectors respectively. 4 EN 61169-2:2007 5 9,1 min.7,11+0,4300,
25、8 0,42 max.1 +0,30,12,35+0,030,088,5 min.9,525 0,05 Cone or radiusIEC 105/07 Figure 1a Sliding male connector 7,54 min.0,5+1,50IEC 106/07Figure 1b Sliding female connector Figure 1 Sliding connector EN 61169-2:2007 6 7,11+0,4304 0,54 min.M14 1Optional sealing gasket IEC 107/07Figure 2a Screw couplin
26、g male connector 5 min.M14 1IEC 108/07Figure 2b Screw coupling female connector Figure 2 Screw coupling connector EN 61169-2:2007 7 9,1 min.7,11 +0,430 0,8 0,42 max.1 +0,30,12,35 0,018,5 0,029,525 0,05 4 min. M141IEC 109/07 Figure 3a Standard test male connector 4 slots width 0,3 mmlenght 4,5 mmM14
27、10,5+0,205 min.7,2 min.7,54 min.3,2 0,02 IEC 110/07 Figure 3b Standard test female connector Figure 3 Standard test connectors EN 61169-2:2007 8 3.2 Mechanical gauges 3.2.1 General All dimensions are in millimetres. All undimensioned pictorial configurations are for reference purposes only. 3.2.2 So
28、cket connectors Gauges for the resilient outer contact Figure 4 illustrates gauge pins for outer contacts of socket connectors. b 7 0,5aIEC 111/07 Surface finish: Ra 1 G after conditioning 1 M Proof voltage at sea level bc.9.2.6 750 V 86 kPa - 106 kPa Screening effectiveness .9.2.8 as 90 dB Zt Disch
29、arge test (Corona) .9.2.9 na Mechanical Gauge retention force (resilient contacts) 9.3.4 See 3.2 of IEC 61169-1 Contact captivation axial force torque 9.3.5 30 N na Captivated contacts only Engagement and separation Coupling torque friction coupling proof 9.3.6 0,066 Nm max. 0,46 Nm to 0,69 Nm 1,7 N
30、m Screw coupling connectors To overcome friction of a coupling nut Mechanical tests on cable cable pulling cable torsion 9.3.8 9.3.10 120 N 0,1 Nm Tensile strength of coupling mechanism 9.3.11 300 N Bending moment 9.3.12 2 Nm Relative to reference plane Environmental Vibration 9.3.3 98 m/s 10 Hz to
31、500 Hz 10 g acceleration Climatic sequence 9.4.2 40/70/21 Sealing 9.4.5 1 cm3/h max 100 kPa - 110 kPa pressure Salt mist 9.4.6 48 h Endurance Mechanical 0,19.57.10 1 000 cycles High temperature 9.60 1 000 h aThese values apply to basic connectors. They depend on the cable used. Relevant values are g
32、iven in the DS. bVoltage values are r.m.s. values at 50 Hz 60 Hz, unless otherwise specified. cCables used with these connectors may have values of lower performance than those given in this table. EN 61169-2:2007 11 4.3 Test schedule and inspection requirements 4.3.1 Acceptance tests Table 2 indica
33、tes the various acceptance tests, methods and assessment criteria involved. Table 2 Acceptance tests Assessment level M (higher) Assessment level H (lower) Test method IEC 61169-1 subclause Test Required IL AQL % PeriodTest Required IL AQL % PeriodGroup A1 Visual examination 9.1.2 a II 1,0 A S3 1,5
34、Group B1 Outline dimensions 9.1.3.1 a S4 0,4 A S3 4,0 Mechanical compatibility 9.1.3.3 a II 1,0 A S3 1,5 Engagement and separation 9.3.6 a S4 0,40 Lot A S3 1,5 Lot Gauge retention (resilient contact) 9.3.4 ia II 1,0 Ia S3 1,5 Sealing, non-hermetic 9.4.5.1 ia II 0,65 by ia S3 1,0 by Sealing, hermetic
35、 9.4.5.2 ia II 0,015 ia S3 0,025 Voltage proof 9.2.6 a S4 0,40 lot a II 4,0 lot Solderability piece parts 9.3.2.1.1 ia S4 0,40 ia S3 4,0 Insulation resistance 9.2.5 a S4 0,40 a S3 4,0 NOTE Details of symbols, abbreviations and procedures: a = suggested as applicable ia = test suggested (if technical
36、ly applicable) IL = Inspection Level AQL = Acceptable Quality Level (d) = destructive tests specimens shall not be returned to stock 4.3.2 Periodic tests Table 3 indicates the various periodic tests, methods and assessment criteria involved. There are no group C tests for levels H and M. EN 61169-2:
37、2007 12 Table 3 Periodic tests Assessment level M (higher) Assessment level H (lower) Test method IEC 61169-1 subclause Test required Number of speci-mens Permitted failures per group# Period Test required Number of speci-mens Permitted failures per group# Period Group D1 (d) 6 1 3 years 3 1 3 years
38、 Solderability connector assemblies 9.3.2.1.1 ia ia Resistance to soldering heat 9.3.2.1.2 ia ia Mechanical tests on cable fixing cable rotation (nutation) 9.3.7.2 ia ia cable pulling 9.3.8 ia ia cable bending 9.3.9 ia ia cable torsion 9.3.10 ia ia Group D2 (d) 6 1 3 years 3 1 3 years Contact resist
39、ance, outer conductor and screen continuity centre conductor continuity 9.2.3 a a Vibration 9.3.3 a Damp heat, steady state 9.4.3 a a Group D3 (d) 1* 1 3 years 1* 1 3 years Dimensions piece-parts and materials 9.1.3.2 a a Group D4 (d) 6 1 3 years 3 1 3 years Mechanical endurance 9.5 a a High tempera
40、ture endurance 9.6 a a Sulphur dioxide 9.4.8 na na Group D5 (d) 6 1 3 years 3 1 3 years Reflection factor 9.2.1 a a Screening effectiveness 9.2.8 a a Water immersion 9.2.7 ia ia Group D6 (d) 6 1 3 years 3 1 3 years Contact captivation 9.3.5 a a Rapid change of temperature 9.4.4 na na Climatic sequen
41、ce 9.4.2 a a EN 61169-2:2007 13 Table 3 (continued) Assessment level M (higher) Assessment level H (lower) Test method IEC 61169-1 subclause Test required Number of speci-mens Permitted failures per group# Period Test required Number of speci-mens Permitted failures per group# Period Group D7 (d) 1
42、3 years 1 3 years Resistance to solvents and contaminating fluids 9.7 ia ia Details of symbols, abbreviations and procedures: a = suggested as applicable ia = test suggested (if technically applicable) na = not applicable IL = Inspection Level AQL = Acceptable Quality Level * = one set of piece-part
43、s each style and variant, unless using common piece parts # = for Qualification Approval (QA) a total of two failures only permitted for level H and 1 failure only for level M from groups D1 to D7 = Group D7 number of pairs for each solvent (d) = destructive tests specimens shall not be returned to
44、stock 4.4 Procedures 4.4.1 Quality conformance inspection This shall consist of test groups A1 and B1 on a lot-by-lot basis. 4.4.2 Qualification approval and its maintenance This shall consist of three consecutive lots passing test groups A1 and B1 followed by selection of specimens from the lots as
45、 appropriate. These specimens shall successfully pass the specified periodic D tests. 5 Instructions for preparation of detail specifications 5.1 General Detail specifications (DS) writers shall use the appropriate BDS pro-forma. The following pages comprise the pro-forma BDS dedicated for use with
46、75 type 9,52 connectors. As such, it will already have entered on it information relating to a) the basic specification number applicable to all the detail specifications covering connector styles of the type covered by the sectional specification; b) the connector series designation. The specificat
47、ion writer should enter the details relating to the connector style/variant(s) to be covered as indicated. The numbers in brackets on the BDS pro-forma correspond to the following indications which shall be given. 5.2 Identification of the detail specification (1) The name of the National Standards
48、Organization (NSO) under whose authority the DS is published and, if applicable, the organization from whom the DS is available. (2) The relevant mark of conformity and the number allotted to the DS by the relevant national or international organization authorizing the DS EN 61169-2:2007 14 (3) The
49、number and issue number of the IEC/IECQ generic or sectional specification as relevant; also national reference if different. (4) If different from the IEC/IECQ number, any national number of the DS, date of issue and any further information required by the national system, together with any amendment numbers. 5.3 Identification of th
