EN 61631-2001 en Test Method for the Mechanical Strength of Cores Made of Magnetic Oxides《磁氧化物制磁心的机械强度的试验方法 IEC 61631 2001》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DS ISO 2905-1989 Modular units for machine tool construction Spindle noses and adjustable adaptors for multi-spindle heads《机床结构的组合件 多轴主轴箱的轴头和可调节的紧固机构》.pdf

DS ISO 2912-1989 Modular units for machine tool construction Multi-spindle heads Casing and input drive shaft dimensions《机床结构的组合件 多轴主轴箱和传动输入轴的尺寸》.pdf

DS ISO 2934-1989 Modular units for machine tool construction Wing base for columns《机床结构的组合件》.pdf

DS ISO 2937-1975 Plain end seamless steel tubes for mechanical application《机械用光端无缝钢管》.pdf

DS ISO 296-1992 Machine tools Self-holding tapers for tool shanks《机床 刀具柄用自夹圆锥》.pdf

DS ISO 297-1992 7 24 tapers for tool shanks for manual changing《7 24手动换刀用刀具柄圆锥》.pdf

DS ISO 2972-1989 Numerical control of machines Symbols《机床的数字控制 符号》.pdf

DS ISO 299-1989 Machine tool tables T-slots and corresponding bolts《机床工作台 T形槽和 T型螺钉》.pdf

DS ISO 3-1981 Preferred numbers Series of preferred numbers《优先数 优先数列》.pdf