1、BSI Standards PublicationIndustrial communication networks ProfilesPart 5-17: Installation of fieldbuses Installation profiles for CPF 17BS EN 61784-5-17:2013National forewordThis British Standard is the UK implementation of EN 61784-5-17:2013. It isidentical to IEC 61784-5-17:2013.The UK participat
2、ion in its preparation was entrusted to Technical Com-mittee AMT/7, Industrial communications: process measurement andcontrol, including fieldbus.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the nece
3、ssary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2014.Published by BSI Standards Limited 2014ISBN 978 0 580 84202 3ICS 25.040.40; 35.100.40Compliance with a British Standard cannot confer immunity fromlegal obligations.This British S
4、tandard was published under the authority of theStandards Policy and Strategy Committee on 31 January 2014.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 61784-5-17:2013EUROPEAN STANDARD EN 61784-5-17 NORME EUROPENNE EUROPISCHE NORM December 2013 CENELEC Europe
5、an Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldw
6、ide for CENELEC members. Ref. No. EN 61784-5-17:2013 E ICS 25.040.40; 35.100.40 English version Industrial communication networks - Profiles - Part 5-17: Installation of fieldbuses - Installation profiles for CPF 17 (IEC 61784-5-17:2013) Rseaux de communication industriels - Profils - Partie 5-17: I
7、nstallation des bus de terrain - Profils dinstallation pour CPF 17 (CEI 61784-5-17:2013) Industrielle Kommunikationsnetze - Profile - Teil 5-17: Feldbusinstallation - Installationsprofile fr die Kommunikationsprofilfamilie 17 (IEC 61784-5-17:2013) This European Standard was approved by CENELEC on 20
8、13-10-22. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be
9、 obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notif
10、ied to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, G
11、reece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 61784-5-17:2013EN 61784-5-17:2013 - 2 - Foreword The text of document 65C/738/FDIS,
12、future edition 1 of IEC 61784-5-17, prepared by SC 65C “Industrial networks“ of IEC/TC 65 “Industrial-process measurement, control and automation“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61784-5-17:2013. The following dates are fixed: latest date by which the doc
13、ument has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2014-07-22 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2016-10-22 This standard is to be used in conjunction with EN 61918:2
14、013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61784-5-17:2013 was
15、 approved by CENELEC as a European Standard without any modification. BS EN 61784-5-17:2013- 3 - EN 61784-5-17:2013 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively ref
16、erenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modif
17、ications, indicated by (mod), the relevant EN/HD applies. Annex ZA of EN 61918:2013 applies, except as follows: Publication Year Title EN/HD Year Addition to Annex ZA of EN 61918:2013: IEC 61918 2013 Industrial communication networks - Installation of communication networks in industrial premises EN
18、 61918 2013 BS EN 61784-5-17:2013 2 61784-5-17 IEC:2013 CONTENTS INTRODUCTION . 7 1 Scope . 8 2 Normative references . 8 3 Terms, definitions and abbreviated terms . 8 4 CPF 17: Overview of installation profiles 8 5 Installation profile conventions . 8 6 Conformance to installation profiles 9 Annex
19、A (Normative) CP 17/1 (RAPIEnet) specific installation profile. 10 A.1 Installation profile scope . 10 A.2 Normative references . 10 A.3 Installation profile terms, definitions, and abbreviated terms . 10 A.3.1 Terms and definitions 10 A.3.2 Abbreviated terms . 10 A.3.3 Conventions for installation
20、profiles . 10 A.4 Installation planning . 10 A.4.1 General . 10 A.4.1.1 Objective 10 A.4.1.2 Cabling in industrial premises . 10 A.4.1.3 The planning process 10 A.4.1.4 Specific requirements for CPs . 10 A.4.1.5 Specific requirements for generic cabling in accordance with ISO/IEC 24702 10 A.4.2 Plan
21、ning requirements . 10 A.4.2.1 Safety . 10 A.4.2.2 Security 10 A.4.2.3 Environmental considerations and EMC 10 A.4.2.4 Specific requirements for generic cabling in accordance with ISO/IEC 24702 11 A.4.3 Network capabilities 11 A.4.3.1 Network topology 11 A.4.3.2 Network characteristics . 11 A.4.4 Se
22、lection and use of cabling components 12 A.4.4.1 Cable selection . 12 A.4.4.2 Connecting hardware selection . 14 A.4.4.3 Connections within a channel/permanent link 15 A.4.4.4 Terminators 16 A.4.4.5 Device location and connection . 16 A.4.4.6 Coding and labelling . 16 A.4.4.7 Earthing and bonding of
23、 equipment and devices and shielded cabling 16 A.4.4.8 Storage and transportation of cables . 17 A.4.4.9 Routing of cables 18 A.4.4.10 Separation of circuit 18 A.4.4.11 Mechanical protection of cabling components . 18 BS EN 61784-5-17:201361784-5-17 IEC:2013 3 A.4.4.12 Installation in special areas
24、. 18 A.4.5 Cabling planning documentation 19 A.4.5.1 Common description . 19 A.4.5.2 Cabling planning documentation for CPs . 19 A.4.5.3 Network certification documentation 19 A.4.5.4 Cabling planning documentation for generic cabling in accordance with ISO/IEC 24702. 19 A.4.6 Verification of cablin
25、g planning specification . 19 A.5 Installation implementation . 19 A.5.1 General requirements 19 A.5.1.1 Common description . 19 A.5.1.2 Installation of CPs . 19 A.5.1.3 Installation of generic cabling in industrial premises 19 A.5.2 Cable installation . 19 A.5.2.1 General requirements for all cabli
26、ng types 19 A.5.2.2 Installation and routing 20 A.5.2.3 Specific requirements for CPs . 20 A.5.2.4 Specific requirements for wireless installation . 20 A.5.2.5 Specific requirements for generic cabling in accordance with ISO/IEC 24702 21 A.5.3 Connector installation 21 A.5.3.1 Common description . 2
27、1 A.5.3.2 Shielded connectors . 21 A.5.3.3 Unshielded connectors 21 A.5.3.4 Specific requirements for CPs . 21 A.5.3.5 Specific requirements for generic cabling in accordance with ISO/IEC 24702 21 A.5.4 Terminator installation . 21 A.5.5 Device installation . 21 A.5.5.1 Common description . 21 A.5.5
28、.2 Specific requirements for CPs . 21 A.5.6 Coding and labelling 21 A.5.6.1 Common description . 21 A.5.6.2 Specific requirements for CPs . 21 A.5.7 Earthing and bonding of equipment and devices and shield cabling . 21 A.5.7.1 Common description . 21 A.5.7.2 Bonding and earthing of enclosures and pa
29、thways 21 A.5.7.3 Earthing methods 21 A.5.7.4 Shield termination methods . 22 A.5.7.5 Specific requirements for CPs . 22 A.5.7.6 Specific requirements for generic cabling in accordance with ISO/IEC 24702 22 A.5.8 As-implemented cabling documentation . 22 A.6 Installation verification and installatio
30、n acceptance test 22 A.6.1 General . 22 A.6.2 Installation verification . 22 A.6.2.1 General . 22 A.6.2.2 Verification according to cabling planning documentation 22 A.6.2.3 Verification of earthing and bonding 22 A.6.2.4 Verification of shield earthing 22 BS EN 61784-5-17:2013 4 61784-5-17 IEC:2013
31、 A.6.2.5 Verification of cabling system 22 A.6.2.6 Cable selection verification . 23 A.6.2.7 Connector verification . 23 A.6.2.8 Connection verification 23 A.6.2.9 Terminators verification . 23 A.6.2.10 Coding and labelling verification . 23 A.6.2.11 Verification report . 23 A.6.3 Installation accep
32、tance test . 23 A.6.3.1 General . 23 A.6.3.2 Acceptance test of Ethernet based cabling 23 A.6.3.3 Acceptance test of non-Ethernet-based cabling . 24 A.6.3.4 Specific requirements for wireless installation . 24 A.6.3.5 Acceptance test report 24 A.7 Installation administration . 24 A.8 Installation ma
33、intenance and installation troubleshooting . 24 Figure 1 Standards relationships 7 Table A.1 Network characteristics for balanced cabling based on Ethernet 11 Table A.2 Network characteristics for optical fibre cabling 12 Table A.3 Information relevant to copper cable: fixed cables 13 Table A.4 Info
34、rmation relevant to copper cable: cords 13 Table A.5 Information relevant to optical fibre cables . 14 Table A.6 Connectors for balanced cabling CPs based on Ethernet . 14 Table A.7 Optical fibre connecting hardware 15 Table A.8 Relationship between FOC and fibre types (CP 17/1) . 15 Table A.9 Param
35、eters for balanced cables . 19 Table A.10 Parameters for silica optical fibre cables 20 BS EN 61784-5-17:201361784-5-17 IEC:2013 7 INTRODUCTION This International Standard is one of a series produced to facilitate the use of communication networks in industrial control systems. IEC 61918:2013 provid
36、es the common requirements for the installation of communication networks in industrial control systems. This installation profile standard provides the installation profiles of the communication profiles (CP) of a specific communication profile family (CPF) by stating which requirements of IEC 6191
37、8 fully apply and, where necessary, by supplementing, modifying, or replacing the other requirements (see Figure 1). For general background on fieldbuses, their profiles, and relationship between the installation profiles specified in this standard, see IEC 61158-1. Each CP installation profile is s
38、pecified in a separate annex of this standard. Each annex is structured exactly as the reference standard IEC 61918 for the benefit of the persons representing the roles in the fieldbus installation process as defined in IEC 61918 (planner, installer, verification personnel, validation personnel, ma
39、intenance personnel, administration personnel). By reading the installation profile in conjunction with IEC 61918, these persons immediately know which requirements are common for the installation of all CPs and which are modified or replaced. The conventions used to draft this standard are defined
40、in Clause 5. The provision of the installation profiles in one standard for each CPF (for example IEC 61784-5-17 for CPF 17), allows readers to work with standards of a convenient size. Figure 1 Standards relationships BS EN 61784-5-17:2013 8 61784-5-17 IEC:2013 INDUSTRIAL COMMUNICATION NETWORKS PRO
41、FILES Part 5-17: Installation of fieldbuses Installation profiles for CPF 17 1 Scope This part of IEC 61784-5 specifies the installation profiles for CPF 17 (RAPIEnet1). The installation profiles are specified in the annex. This annex is read in conjunction with IEC 61918:2013. 2 Normative reference
42、s The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 6
43、1918:2013, Industrial communication networks Installation of communication networks in industrial premises The normative references of IEC 61918:2013, Clause 2, apply. 3 Terms, definitions and abbreviated terms For the purpose of this document, the terms, definitions and abbreviated terms of IEC 619
44、18:2013, Clause 3, apply. 4 CPF 17: Overview of installation profiles CPF 17 consists of one communication profile as specified in IEC 61784-2. The installation requirements for CP 17/1 (RAPIEnet) are specified in Annex A. 5 Installation profile conventions The numbering of the clauses and subclause
45、s in the annexes of this standard corresponds to the numbering of IEC 61918 main clauses and subclauses. The annex clauses and subclauses of this standard supplement, modify, or replace the respective clauses and subclauses in IEC 61918. Where there is no corresponding subclause of IEC 61918 in the
46、normative annexes in this standard, the subclause of IEC 61918 applies without modification. 1RAPIEnet is a trade name of LSIS. This information is given for the convenience of users of this document and does not constitute an endorsement by IEC of the trademark holder or any of its products. Compli
47、ance to this profile does not require use of the trade name RAPIEnet. Use of the trade name RAPIEnet requires permission of the trade name holder. BS EN 61784-5-17:201361784-5-17 IEC:2013 9 The annex heading letter represents the installation profile assigned in Clause 4. The annex heading number sh
48、all represent the corresponding numbering of IEC 61918. EXAMPLE “Subclause A.4.4” in IEC 61784-5-17 means that CP 17/1 specifies the subclause 4.4 of IEC 61918. All main clauses of IEC 61918 are cited and apply in full unless otherwise stated in each normative installation profile annex. If all subc
49、lauses of a (sub)clause are omitted, then the corresponding IEC 61918 (sub)clause applies. If in a (sub)clause it is written “Not applicable.”, then the corresponding IEC 61918 (sub)clause does not apply. If in a (sub)clause it is written “Addition:”, then the corresponding IEC 61918 (sub)clause applies with the additions written in the profile. If in a (sub)clause it is written “Replacement:”, then the text provided in the profile replaces the text of the corresponding IEC 61918 (sub)clau
