1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI British StandardsWB9423_BSI_StandardColCov_noK_AW:BSI FRONT COVERS 5/9/08 12:55 Page 1Digital addressable lighting interface Part 101: General requirements SystemBS EN 62386-101:2009National foreword
2、This British Standard is the UK implementation of EN 62386-101:2009. It isidentical to IEC 62386-101:2009. Together with BS EN 62386-102:2009 andBS EN 62386-201:2009, it partially supersedes BS EN 60929:2006 whichremains current.The UK participation in its preparation was entrusted by Technical Comm
3、itteeCPL/34, Lamps and related equipment, to Subcommittee CPL/34/3, Auxiliariesfor lamps.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for
4、its correct application. BSI 2009ISBN 978 0 580 57534 1ICS 29.140.50; 29.140.99Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 31 October 2009Amendments issued sin
5、ce publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 62386-101:2009EUROPEAN STANDARD EN 62386-101 NORME EUROPENNE EUROPISCHE NORM August 2009 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechni
6、sche Normung Central Secretariat: Avenue Marnix 17, B - 1000 Brussels 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 62386-101:2009 E ICS 29.140; 29.140.50 Partially supersedes EN 60929:2006 English version Digital addressab
7、le lighting interface - Part 101: General requirements - System (IEC 62386-101:2009) Interface dclairage adressable numrique - Partie 101: Exigences gnrales - Systme (CEI 62386-101:2009) Digital adressierbare Schnittstelle fr die Beleuchtung - Teil 101: Allgemeine Anforderungen - System (IEC 62386-1
8、01:2009) This European Standard was approved by CENELEC on 2009-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliog
9、raphical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility
10、of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece,
11、Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 62386-101:2009 - 2 - Foreword The text of document 34C/860/FDIS, future edition 1 of IEC 62386-101, pr
12、epared by SC 34C, Auxiliaries for lamps, of IEC TC 34, Lamps and related equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62386-101 on 2009-07-01. EN 62386-101:2009, together with EN 62386-102 and EN 62386-201, replaces Clause E.4, “Control by digital signa
13、ls”, and Annex G, “Test procedures for ballasts with digital control interface according to Clause E.4“ of EN 60929:2006. This Part 101 is intended to be used in conjunction with Part 102, which contains general requirements for the relevant product type (control gear), and with the appropriate part
14、 2XX (particular requirements for control gear) containing clauses to supplement or modify the corresponding clauses in Parts 101 and 102 in order to provide the relevant requirements for each type of product. The following dates were fixed: latest date by which the EN has to be implemented at natio
15、nal level by publication of an identical national standard or by endorsement (dop) 2010-04-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2012-07-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC
16、62386-101:2009 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60921 NOTE Harmonized as EN 60921:2004 (not modified). IEC 60923 NOTE Harmonized as EN 60923:2005 (
17、not modified). IEC 60925 NOTE Harmonized as EN 60925:1991 (not modified). IEC 60929 NOTE Harmonized as EN 60929:2006 (not modified). IEC 61347-1 NOTE Harmonized as EN 61347-1:2007 (modified). IEC 61547 NOTE Harmonized as EN 61547:2009 (not modified). CISPR 15 NOTE Harmonized as EN 55015:2006 (not mo
18、dified). _ BS EN 62386-101:2009- 3 - EN 62386-101:2009 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edit
19、ion cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60598-1
20、 (mod) -1)Luminaires -Part 1: General requirements and tests EN 60598-1 + A11 20082)2009 IEC 60669-2-1 (mod) A1 (mod) 2002 2008 Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches EN 60669-2-1 + corr. December A1 2004 2007 2009
21、IEC 61347-2-3 2000 Lamp controlgear - Part 2-3: Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps EN 61347-2-3 + corr. July 2001 2003 IEC 62386-102 2009 Digital addressable lighting interface - Part 102: General requirements - Control gearEN 62386-102 2009 1)Undated
22、 reference. 2)Valid edition at date of issue. BS EN 62386-101:2009 2 62386-101 IEC:2009 CONTENTS FOREWORD.3 INTRODUCTION.5 1 Scope.6 2 Normative references .6 3 Terms and definitions .6 4 General 7 4.1 Purpose 7 4.2 Master-slave structure.7 4.3 Specification overview.7 5 Electrical specification8 5.
23、1 General .8 5.2 Marking of the control input terminals8 5.3 Characteristics of the control interface 8 5.4 Insulating system of the control input terminals .9 5.5 Signal voltage rating9 5.6 Signal current rating10 5.7 Signal rise time and fall time .12 6 Interface power supply .12 6.1 General .12 6
24、.2 Marking of the power supply terminals.12 6.3 Insulating system of the power supply terminals 12 6.4 Voltage rating13 6.5 Current rating 13 6.6 Timing requirements13 7 Transmission protocol structure13 8 Timing 13 9 Method of operation .13 10 Declaration of variables13 11 Definition of commands 13
25、 Bibliography15 Figure 1 Equivalent circuit of the control interface8 Figure 2 Voltage levels 10 Figure 3 Voltage and current levels for forward and backward transmission at a control gear 11 Figure 4 Rise time and fall time at the control interface12 BS EN 62386-101:200962386-101 IEC:2009 3 INTERNA
26、TIONAL ELECTROTECHNICAL COMMISSION _ DIGITAL ADDRESSABLE LIGHTING INTERFACE Part 101: General requirements System FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committe
27、es). The object of the IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Avail
28、able Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)“). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental org
29、anizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical
30、 matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC Na
31、tional Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity
32、, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC p
33、rovides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, emp
34、loyees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of t
35、he publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the
36、 possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62386-101 has been prepared by subcommittee 34C: Auxiliaries for lamps, of IEC technical com
37、mittee 34: Lamps and related equipment. This International Standard, together with IEC 62386-102 and IEC 62386-201, replaces Clause E.4, “Control by digital signals”, and Annex G, “Test procedures for ballasts with digital control interface according to Clause E.4“ of IEC 60929:2006. The text of thi
38、s standard is based on the following documents: FDIS Report on voting 34C/860/FDIS 34C/873/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. BS EN 62386-101:2009 4 62386-101 IEC:2009 This Part 101 is intended to be
39、 used in conjunction with Part 102, which contains general requirements for the relevant product type (control gear), and with the appropriate part 2XX (particular requirements for control gear) containing clauses to supplement or modify the corresponding clauses in Parts 101 and 102 in order to pro
40、vide the relevant requirements for each type of product. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of the IEC 62386 series, published under the general title Digital addressable lighting interface can be found on the IEC website. The com
41、mittee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a re
42、vised edition, or amended. BS EN 62386-101:200962386-101 IEC:2009 5 INTRODUCTION This first edition of IEC 62386-101 is published in conjunction with IEC 62386-102 and with the various parts that make up the IEC 62386-200 series for control gear. A further number of parts covering control devices (t
43、o be published as the general requirements standard IEC 62386-103 and the various parts that make up the IEC 62386-300 series of particular requirements for control devices) is under consideration. The division into separately published parts provides for ease of future amendments and revisions. Add
44、itional requirements will be added as and when a need for them is recognised. This International Standard, and the other parts that make up the IEC 62386-100 series, in referring to any of the clauses of IEC 62386-101 or IEC 62386-102, specify the extent to which such a clause is applicable and the
45、order in which the tests are to be performed. The parts also include additional requirements, as necessary. All numbers used in this International Standard are decimal numbers unless otherwise noted. Hexadecimal numbers are given in the format 0xVV, where VV is the value. Binary numbers are given in
46、 the format XXXXXXXXb or in the format XXXX XXXX, where X is 0 or 1, “x“ in binary numbers means “dont care“. BS EN 62386-101:2009 6 62386-101 IEC:2009 DIGITAL ADDRESSABLE LIGHTING INTERFACE Part 101: General requirements System 1 Scope This International Standard specifies a protocol for control by
47、 digital signals of electronic lighting equipment used on a.c. or d.c. supplies. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the r
48、eferenced document (including any amendments) applies. IEC 60598-1, Luminaires Part 1: General requirements and tests IEC 60669-2-1:2002, Switches for household and similar fixed electrical installations Part 2-1: Particular requirements Electronic switches Amendment 1 (2008) IEC 61347-2-3:2000, Lam
49、p controlgear Part 2-3: Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps IEC 62386-102:2009, Digital addressable lighting interface Part 102: General requirements Control gear 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 control device device that is connected to the interface and sends commands in order to control other devices (for example lamp control gear
