1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationField device tool (FDT) interfacespecification Part 1: Overview and guidanceBS EN 62453-1:2009Copyright European Committee for Electrotechnical Standardization Provided by IHS un
2、der license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-National forewordThis British Standard is the UK implementation of EN 62453-1:2009. It isidentical to IEC 62453-1:2009.The UK participation in its preparation was entrusted to Technical Committ
3、eeAMT/7, Industrial communications: process measurement and control, including fieldbus.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for i
4、ts correct application. BSI 2010ISBN 978 0 580 62558 9ICS 25.040.40; 35.100.05; 35.110Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 31 January 2010Amendments iss
5、ued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 62453-1:2009Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EUROPEAN STANDARD EN 62453-
6、1 NORME EUROPENNE EUROPISCHE NORM October 2009 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: Avenue Marnix 17, B - 1000 Brussels 2009 CENELEC - All rights of exploi
7、tation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 62453-1:2009 E ICS 25.040.40; 35.100.05; 35.110 English version Field device tool (FDT) interface specification - Part 1: Overview and guidance (IEC 62453-1:2009) Spcification des interfaces des outils des dispos
8、itifs de terrain (FDT) - Partie 1: Vue gnrale et recommandations (CEI 62453-1:2009) Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 1: berblick und Leitfaden (IEC 62453-1:2009) This European Standard was approved by CENELEC on 2009-08-01. CENELEC members are bound to comply with the CEN/C
9、ENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to an
10、y CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official ver
11、sions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romani
12、a, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 62453-1:2009Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 62453-1:2009 -
13、 2 - Foreword The text of document 65E/123/FDIS, future edition 1 of IEC 62453-1, prepared by SC 65E, Devices and integration in enterprise systems, of IEC TC 65, Industrial-process measurement, control and automation, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN
14、62453-1 on 2009-08-01. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2010-05-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow
15、) 2012-08-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 62453-1:2009 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards ind
16、icated: 5 IEC 61131 NOTE Harmonized in EN 61131 series (not modified). 6 IEC 61499 NOTE Harmonized in EN 61499 series (not modified). 7 IEC 61800-7 NOTE Harmonized in EN 61800-7 series (not modified). 9 IEC 61915-1 NOTE Harmonized as EN 61915-1:2008 (not modified). 10 IEC 62026 NOTE Harmonized in EN
17、 62026 series (not modified). 13 IEC 61804-2 NOTE Harmonized as EN 61804-2:2007 (not modified). 14 IEC 61804-3 NOTE Harmonized as EN 61804-3:2007 (not modified). 16 IEC 62453 NOTE Harmonized in EN 62453 series (not modified). _ BS EN 62453-1:2009Copyright European Committee for Electrotechnical Stan
18、dardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- 3 - EN 62453-1:2009 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following reference
19、d documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modif
20、ications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 61158 Series Industrial communication networks Fieldbus specifications EN 61158SeriesIEC 61784 Series Industrial communication networks Profiles EN 61784 Series ISO/IEC 19501 2005 Information technology O
21、pen Distributed Processing Unified Modeling Language (UML) BS EN 62453-1:2009Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- 2 62453-1 IEC:2009(E) CONTENTS
22、INTRODUCTION.6 1 Scope.7 2 Normative references .7 3 Terms, definitions, symbols, abbreviations and conventions .7 3.1 Terms and definitions 7 3.2 Abbreviations 12 3.3 Conventions 12 4 FDT overview .12 4.1 State of the art 12 4.2 Objectives of FDT .13 4.2.1 General features13 4.2.2 Device and module
23、 manufacturer benefits .14 4.2.3 System manufacturer and integrator benefits.14 4.2.4 Other applications .14 4.3 FDT model 15 4.3.1 General .15 4.3.2 Frame Applications16 4.3.3 Device Type Manager17 4.3.4 Communication Channel concept.18 4.3.5 Presentation object20 5 Structure of the IEC 62453 serie
24、s.20 5.1 Structure overview 20 5.2 Part 2 Concepts and detailed description21 5.3 Parts 3xy Communication profile integration.22 5.3.1 General .22 5.3.2 Communication profile integration IEC 61784 CPF 1.22 5.3.3 Communication profile integration IEC 61784 CPF 2.22 5.3.4 Communication profile integra
25、tion IEC 61784 CP 3/1 and 3/2 .22 5.3.5 Communication profile integration IEC 61784 CP 3/4, CP 3/5 and 3/6.22 5.3.6 Communication profile integration IEC 61784 CPF 6.22 5.3.7 Communication profile integration IEC 61784 CPF 9.23 5.3.8 Communication profile integration IEC 61784 CPF 15.23 5.4 Parts 4x
26、 Object model integration profiles 23 5.4.1 General .23 5.4.2 Object model integration profile Common object model.23 5.5 Parts 5xy Communication profile implementation23 5.5.1 General .23 5.5.2 Communication profile integration IEC 61784 CPF 1.23 5.5.3 Communication profile integration IEC 61784 CP
27、F 2.24 5.5.4 Communication profile integration IEC 61784 CP 3/1 and 3/2 .24 5.5.5 Communication profile integration IEC 61784 CP 3/4, CP 3/5 and 3/6.24 5.5.6 Communication profile integration IEC 61784 CPF 6.24 5.5.7 Communication profile integration IEC 61784 CPF 9.24 5.5.8 Communication profile in
28、tegration IEC 61784 CPF 15.24 BS EN 62453-1:2009Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-62453-1 IEC:2009(E) 3 5.6 Parts 6x DTM styleguides.25 5.6.1 G
29、eneral .25 5.6.2 Device Type Manager (DTM) styleguide for common object model 25 6 Relation of the IEC 62453 series to other standardization activities 25 7 Migration to DTM29 8 How to read IEC 62453 30 8.1 Architecture.30 8.2 Dynamic behavior30 8.3 Structured data types 31 8.4 Fieldbus communicatio
30、n 31 Annex A (informative) UML notation.32 Annex B (informative) Implementation policy37 Bibliography38 Figure 1 Different tools and fieldbusses result in limited integration .13 Figure 2 Full integration of all devices and modules into a homogeneous system.14 Figure 3 General architecture and compo
31、nents 15 Figure 4 FDT software architecture 17 Figure 5 General FDT client/server relationship .18 Figure 6 Typical FDT channel architecture .19 Figure 7 Channel/parameter relationship20 Figure 8 Structure of the IEC 62453 series 20 Figure 9 Standards related to IEC 62453 in an automation hierarchy
32、26 Figure 10 Standards related to IEC 62453 grouped by purpose.28 Figure 11 DTM implementations30 Figure A.1 Note .32 Figure A.2 Class 32 Figure A.3 Association .32 Figure A.4 Composition33 Figure A.5 Aggregation 33 Figure A.6 Dependency .33 Figure A.7 Abstract class, generalization and interface 33
33、 Figure A.8 Multiplicity 34 Figure A.9 Elements of UML statechart diagrams.34 Figure A.10 Example of UML state chart diagram 35 Figure A.11 UML use case syntax35 Figure A.12 UML sequence diagram 36 Table 1 Overview of related standards .27 BS EN 62453-1:2009Copyright European Committee for Electrote
34、chnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- 6 62453-1 IEC:2009(E) INTRODUCTION Enterprise automation requires two main data flows: a “vertical” data flow from enterprise level down to the field
35、devices including signals and configuration data, and a “horizontal” communication between field devices operating on the same or different communication technologies. With the integration of fieldbusses into control systems, there are a few other tasks which need to be performed. In addition to fie
36、ldbus- and device-specific tools, there is a need to integrate these tools into higher-level system-wide planning- or engineering tools. In particular, for use in extensive and heterogeneous control systems, typically in the area of the process industry, the unambiguous definition of engineering int
37、erfaces that are easy to use for all those involved is of great importance. Several different manufacturer specific tools have to be used. The data in these tools are often invisible data islands from the viewpoint of system life-cycle management and plant-wide automation. To ensure the consistent m
38、anagement of a plant-wide control and automation technology, it is necessary to fully integrate fieldbusses, devices and sub-systems as a seamless part of a wide range of automation tasks covering the whole automation life-cycle. IEC 62453 provides an interface specification for developers of FDT (F
39、ield Device Tool) components to support function control and data access within a client/server architecture. The availability of this standard interface facilitates development of servers and clients by multiple manufacturers and supports open interoperation. A device or module-specific software co
40、mponent, called a DTM (Device Type Manager) is supplied by a manufacturer with the related device type or software entity type. Each DTM can be integrated into engineering tools via defined FDT interfaces. This approach to integration is in general open for all fieldbusses and thus supports integrat
41、ion of different devices and software modules into heterogeneous control systems. The IEC 62453 common application interface supports the interests of application developers, system integrators, and manufacturers of field devices and network components. It also simplifies procurement, reduces system
42、 costs and helps manage the lifecycle. Significant savings are available in operating, engineering and maintaining the control systems. The objectives of IEC 62453 series are to support: universal plant-wide tools for life-cycle management of heterogeneous fieldbus environments, multi-manufacturer d
43、evices, function blocks and modular sub-systems for all automation domains (e.g. process automation, factory automation and similar monitoring and control applications); integrated and consistent life-cycle data exchange within a control system including its fieldbuses, devices, function blocks and
44、modular sub-systems; simple and powerful manufacturer-independent integration of different automation devices, function blocks and modular sub-systems into the life-cycle management tools of a control system. The FDT concept supports planning and integration of monitoring and control applications, i
45、t does not provide a solution for other engineering tasks such as “electrical wiring planning”, “mechanical planning”. Plant management subjects such as “maintenance planning”, “control optimization”, “data archiving”, are not part of this FDT standard. Some of these aspects may be included in futur
46、e editions of FDT publications. BS EN 62453-1:2009Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-62453-1 IEC:2009(E) 7 FIELD DEVICE TOOL (FDT) INTERFACE SPE
47、CIFICATION Part 1: Overview and guidance 1 Scope This part of IEC 62453 presents an overview and guidance for the IEC 62453 series. It explains the structure and content of the IEC 62453 series (see Clause 5); provides explanations of some aspects of the IEC 62453 series that are common to many of t
48、he parts of the series; describes the relationship to some other standards. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 61158 (all parts), Industrial communication networks Fieldbus specifications IEC 61784 (a
