1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Connectors for electrical and electronic equipment Product requirementsPart 3-119: Rectangular connectors Detail specification for shielded and unshielded, free and fixed 10-way connectors with push-pull coupling for in
2、dustrial environments for data transmission with frequencies up to 100 MHz (IEC 61076-3-119:2017)BS EN IEC 61076-3-119:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 61076-3-119 March 2018 ICS 31.220.10 English Version Connectors for electrical and electronic equipment - Product requir
3、ements - Part 3-119: Rectangular connectors - Detail specification for shielded and unshielded, free and fixed 10-way connectors with push-pull coupling for industrial environments for data transmission with frequencies up to 100 MHz (IEC 61076-3-119:2017) Connecteurs pour quipements lectriques et l
4、ectroniques - Exigences de produit - Partie 3-119: Connecteurs rectangulaires - Spcification particulire pour les fiches et les embases crantes et non crantes 10 voies avec couplage de type pousser-tirer dans des environnements industriels pour la transmission de donnes des frquences jusqu 100 MHz (
5、IEC 61076-3-119:2017) Steckverbinder fr elektronische Einrichtungen - Produktanforderungen - Teil 3-119: Rechteckige Steckverbinder - Bauartspezifikation fr geschirmte und ungeschirmte, freie und feste Steckverbinder, 10-polig, mit Push-pull-Verriegelung fr industrielle Umgebungen fr Datenbertragung
6、en mit Frequenzen bis zu 100 MHz (IEC 61076-3-119:2017) This European Standard was approved by CENELEC on 2018-01-12. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard witho
7、ut any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any oth
8、er language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cypr
9、us, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turke
10、y and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form
11、and by any means reserved worldwide for CENELEC Members. Ref. No. EN IEC 61076-3-119:2018 E National forewordThis British Standard is the UK implementation of EN IEC 610763119:2018. It is identical to IEC 610763119:2017.The UK participation in its preparation was entrusted to Technical Committee EPL
12、/48, Electromechanical components and mechanical structures for electronic equipment.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for it
13、s correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 93922 8ICS 31.220.10Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and
14、 Strategy Committee on 31 March 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN IEC 610763119:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 61076-3-119 March 2018 ICS 31.220.10 English Version Connectors for electrical and electronic equipmen
15、t - Product requirements - Part 3-119: Rectangular connectors - Detail specification for shielded and unshielded, free and fixed 10-way connectors with push-pull coupling for industrial environments for data transmission with frequencies up to 100 MHz (IEC 61076-3-119:2017) Connecteurs pour quipemen
16、ts lectriques et lectroniques - Exigences de produit - Partie 3-119: Connecteurs rectangulaires - Spcification particulire pour les fiches et les embases crantes et non crantes 10 voies avec couplage de type pousser-tirer dans des environnements industriels pour la transmission de donnes des frquenc
17、es jusqu 100 MHz (IEC 61076-3-119:2017) Steckverbinder fr elektronische Einrichtungen - Produktanforderungen - Teil 3-119: Rechteckige Steckverbinder - Bauartspezifikation fr geschirmte und ungeschirmte, freie und feste Steckverbinder, 10-polig, mit Push-pull-Verriegelung fr industrielle Umgebungen
18、fr Datenbertragungen mit Frequenzen bis zu 100 MHz (IEC 61076-3-119:2017) This European Standard was approved by CENELEC on 2018-01-12. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a natio
19、nal standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A
20、version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulga
21、ria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
22、Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploit
23、ation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN IEC 61076-3-119:2018 E BS EN IEC 610763119:2018EN IEC 61076-3-119:2018 (E) 2 European foreword The text of document 48B/2602/FDIS, future edition 1 of IEC 61076-3-119, prepared by IEC/SC 48B: “Electrical connector
24、s”, of IEC/TC 48: “Electrical connectors and mechanical structures for electrical and electronic equipment”, was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61076-3-119:2018. The following dates are fixed: latest date by which the document has to be implemented at na
25、tional level by publication of an identical national standard or by endorsement (dop) 2018-10-12 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2021-01-12 Attention is drawn to the possibility that some of the elements of this document may be the
26、 subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61076-3-119:2017 was approved by CENELEC as a European Standard without any modification. BS EN IEC 610763119:2018EN IEC 61076
27、-3-119:2018 (E) 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references
28、, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date informati
29、on on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60050-581 2008 International Electrotechnical Vocabulary - Part 581: Electromechanical components for electronic equipment - - IEC 60068-1 - Environmental
30、 testing - Part 1: General and guidance EN 60068-1 - IEC 60068-2-20 2008 Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads EN 60068-2-20 2008 IEC 60352-2 - Solderless connections - Part 2: Crimped connections - Ge
31、neral requirements, test methods and practical guidance EN 60352-2 - IEC 60352-5 - Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance EN 60352-5 - IEC 60512-1-1 - Connectors for electronic equipment - Tests and measurements - Part 1-1: G
32、eneral examination - Test 1a: Visual examination EN 60512-1-1 - IEC 60512-1-2 - Connectors for electronic equipment - Tests and measurements - Part 1-2: General examination - Test 1b: Examination of dimension and mass EN 60512-1-2 - IEC 60512-2-1 - Connectors for electronic equipment - Tests and mea
33、surements - Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact resistance - Millivolt level method EN 60512-2-1 - IEC 60512-3-1 - Connectors for electronic equipment - Tests and measurements - Part 3-1: Insulation tests - Test 3a: Insulation resistance EN 60512-3-1 - IEC
34、 60512-4-1 - Connectors for electronic equipment - Tests and measurements - Part 4-1: Voltage stress tests - Test 4a: Voltage proof EN 60512-4-1 - IEC 60512-5-1 - Connectors for electronic equipment - Tests and measurements - Part 5-1: Current-carrying capacity tests - Test 5a: Temperature rise EN 6
35、0512-5-1 - BS EN IEC 610763119:2018EN IEC 61076-3-119:2018 (E) 4 IEC 60512-6-3 - Connectors for electronic equipment - Tests and measurements - Part 6-3: Dynamic stress tests - Test 6c: Shock EN 60512-6-3 - IEC 60512-6-4 - Connectors for electronic equipment - Tests and measurements - Part 6-4: Dyna
36、mic stress tests - Test 6d: Vibration (sinusoidal) EN 60512-6-4 - IEC 60512-9-1 - Connectors for electronic equipment - Tests and measurements - Part 9-1: Endurance tests - Test 9a: Mechanical operation EN 60512-9-1 - IEC 60512-11-1 - Electromechanical components for electronic equipment - Basic tes
37、ting procedures and measuring methods - Part 11: Climatic tests - Section 1: Test 11a - Climatic sequence EN 60512-11-1 - IEC 60512-11-3 - Connectors for electronic equipment - Tests and measurements - Part 11-3: Climatic tests - Test 11c: Damp heat, steady state EN 60512-11-3 - IEC 60512-11-4 - Con
38、nectors for electronic equipment - Tests and measurements - Part 11-4: Climatic tests - Test 11d: Rapid change of temperature EN 60512-11-4 - IEC 60512-11-7 - Connectors for electronic equipment - Tests and measurements - Part 11- 7: Climatic tests - Test 11g: Flowing mixed gas corrosion test EN 605
39、12-11-7 - IEC 60512-11-9 - Connectors for electronic equipment - Tests and measurements - Part 11-9: Climatic tests - Test 11i: Dry heat EN 60512-11-9 - IEC 60512-11-10 - Connectors for electronic equipment - Tests and measurements - Part 11-10: Climatic tests - Test 11j: Cold EN 60512-11-10 - IEC 6
40、0512-11-12 - Connectors for electronic equipment - Tests and measurements - Part 11-12: Climatic tests - Test 11m: Damp heat, cyclic EN 60512-11-12 - IEC 60512-13-2 - Connectors for electronic equipment - Tests and measurements - Part 13-2: Mechanical operating tests - Test 13b: Insertion and withdr
41、awal forces EN 60512-13-2 - IEC 60512-13-5 - Connectors for electronic equipment - Tests and measurements - Part 13-5: Mechanical operating tests - Test 13e: Polarizing and keying method EN 60512-13-5 - IEC 60512-15-1 - Connectors for electronic equipment - Tests and measurements - Part 15-1:Connect
42、or tests (mechanical) - Test 15a: Contact retention in insert EN 60512-15-1 - IEC 60512-15-6 - Connectors for electronic equipment - Tests and measurements - Part 15-6: Connector tests (mechanical) - Test 15f: Effectiveness of connector coupling devices EN 60512-15-6 - IEC 60512-15-7 - Connectors fo
43、r electronic equipment - Tests and measurements - Part 15-7: Connector tests (mechanical) - Test 15g: Robustness of protective cover attachment EN 60512-15-7 - BS EN IEC 610763119:2018EN IEC 61076-3-119:2018 (E) 5 IEC 60512-16-5 - Connectors for electronic equipment - Tests and measurements - Part 1
44、6-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts) EN 60512-16-5 - IEC 60512-26-100 - Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors
45、according to IEC 60603-7 - Tests 26a to 26g EN 60512-26-100 - IEC 60529 1989 Degrees of protection provided by enclosures (IP Code) EN 60529 1991 - - + corrigendum May 1993 + A1 1999 + A1 2000 + A2 2013 + A2 2013 IEC 60999-1 1999 Connecting devices - Electrical copper conductors - Safety requirement
46、s for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm up to 35 mm (included) EN 60999-1 2000 IEC 61076-1 2006 Connectors for electronic equipment - Product requirements - Part 1: Generic specificati
47、on EN 61076-1 2006 IEC 61984 2008 Connectors - Safety requirements and tests EN 61984 2009 IEC 62197-1 2006 Connectors for electronic equipment - Quality assessment requirements - Part 1: Generic specification EN 62197-1 2006 IEC 62430 2009 Environmentally conscious design for electrical and electro
48、nic products EN 62430 2009 IEC Guide 109 - Environmental aspects - Inclusion in electrotechnical product standards - - ISO 128 series Technical drawings_- General principles of presentation_- Part_1: Introduction and index - - ISO 1101 2017 Geometrical product specifications (GPS) - Geometrical tole
49、rancing - Tolerances of form, orientation, location and run-out EN ISO 1101 2017 ISO 1302 2002 Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation EN ISO 1302 2002 ISO 11469 2016 Plastics - Generic identification and marking of plastics products EN ISO 11469 2016 BS EN IEC 610763119:2018This page deliberately left blank 2 IEC 61076-3-119:2017 IEC 2017 C
