1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 1833-19:2010Textiles Quantitativechemical analysisPart 19: Mixtures of cellulose fibres andasbestos (method by heating) (ISO 1833-19:2006)BS EN ISO 1833-19:2010 BRITISH
2、 STANDARDNational forewordThis British Standard is the UK implementation of EN ISO1833-19:2010. It is identical to ISO 1833-19:2006. It supersedes BS4407:1988 which will be withdrawn on publication of the otherparts of the BS EN ISO 1833 series.The UK participation in its preparation was entrusted t
3、o TechnicalCommittee TCI/80, Chemical testing of textiles.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 201
4、1ISBN 978 0 580 72140 3ICS 59.060.01; 59.060.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 28 February 2011.Amendments issued since publicationDate Text affect
5、edEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 1833-19 October 2010 ICS 59.060.01 English Version Textiles - Quantitative chemical analysis - Part 19: Mixtures of cellulose fibres and asbestos (method by heating) (ISO 1833-19:2006) Textiles - Analyse chimique quantitative - Partie 19: Ml
6、anges de fibres de cellulose et damiante (mthode par chauffage) (ISO 1833-19:2006) Textilien - Quantitative chemische Analysen - Teil 19: Mischungen aus Cellulosefasern und Asbest (Verfahren mittels Erhitzen) (ISO 1833-19:2006) This European Standard was approved by CEN on 12 September 2010. CEN mem
7、bers are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on applicat
8、ion to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has
9、the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Pol
10、and, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by
11、any means reserved worldwide for CEN national Members. Ref. No. EN ISO 1833-19:2010: EBS EN ISO 1833-19:2010EN ISO 1833-19:2010 (E) 3 Foreword The text of ISO 1833-19:2006 has been prepared by Technical Committee ISO/TC 38 “Textiles” of the International Organization for Standardization (ISO) and ha
12、s been taken over as EN ISO 1833-19:2010 by Technical Committee CEN/TC 248 “Textiles and textile products” the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by
13、April 2011, and conflicting national standards shall be withdrawn at the latest by April 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent
14、 rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland
15、, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 1833-19:2006 has been approved by CEN as a EN ISO 1833-19:2010 without any modification. B
16、S EN ISO 1833-19:2010ISO 1833-19:2006(E) ISO 2006 All rights reserved iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO tec
17、hnical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closel
18、y with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft
19、International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this documen
20、t may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 1833-19 was prepared by Technical Committee ISO/TC 38, Textiles. This first edition of ISO 1833-19 cancels and replaces Clause 18 of ISO 1833:1977. ISO 1833:1977 will be cancel
21、led and replaced by ISO 1833-1, ISO 1833-3, ISO 1833-4, ISO 1833-5, ISO 1833-6, ISO 1833-7, ISO 1833-8, ISO 1833-9, ISO 1833-10, ISO 1833-11, ISO 1833-12, ISO 1833-13, ISO 1833-14, ISO 1833-15, ISO 1833-16, ISO 1833-17, ISO 1833-18 and ISO 1833-19. ISO 1833 consists of the following parts, under the
22、 general title Textiles Quantitative chemical analysis: Part 1: General principles of testing Part 2: Ternary fibre mixtures Part 3: Mixtures of acetate and certain other fibres (method using acetone) Part 4: Mixtures of certain protein and certain other fibres (method using hypochlorite) Part 5: Mi
23、xtures of viscose, cupro or modal and cotton fibres (method using sodium zincate) Part 7: Mixtures of polyamide and certain other fibres (method using formic acid) Part 8: Mixtures of acetate and triacetate fibres (method using acetone) Part 9: Mixtures of acetate and triacetate fibres (method using
24、 benzyl alcohol) Part 10: Mixtures of triacetate or polylactide and certain other fibres (method using dichloromethane) Part 11: Mixtures of cellulose and polyester fibres (method using sulfuric acid) Part 12: Mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastanes and cert
25、ain other fibres (method using dimethylformamide) Part 13: Mixtures of certain chlorofibres and certain other fibres (method using carbon disulfide/acetone) BS EN ISO 1833-19:2010ISO 1833-19:2006(E) iv ISO 2006 All rights reserved Part 14: Mixtures of acetate and certain chlorofibres (method using a
26、cetic acid) Part 15: Mixtures of jute and certain animal fibres (method by determining nitrogen content) Part 16: Mixtures of polypropylene fibres and certain other fibres (method using xylene) Part 17: Mixtures of chlorofibres (homopolymers of vinyl chloride) and certain other fibres (method using
27、sulfuric acid) Part 18: Mixtures of silk and wool or hair (method using sulfuric acid) Part 19: Mixtures of cellulose fibres and asbestos (method by heating) Part 21: Mixtures of chlorofibres, certain modacrylics, certain elastanes, acetates, triacetates and certain other fibres (method using cycloh
28、exanone) The following parts are under preparation: Part 6: Mixtures of viscose or certain types of cupro or modal or lyocell and cotton fibres (method using formic acid and zinc chloride) Part 20: Mixtures of elastane and certain other fibres (method using dimethylacetamide) Part 22: Mixtures of vi
29、scose or certain types of cupro or modal or lyocell and flax fibres (method using formic acid and zinc chlorate) Part 23: Mixtures of polyethylene and polypropylene (method using cyclohexanone) Part 24: Mixtures of polyester and some other fibres (method using phenol and tetrachloroethane) BS EN ISO
30、 1833-19:2010INTERNATIONAL STANDARD ISO 1833-19:2006(E) ISO 2006 All rights reserved 1Textiles Quantitative chemical analysis Part 19: Mixtures of cellulose fibres and asbestos (method by heating) SAFETY PRECAUTIONS When cutting yarn or fabric containing asbestos, normal safety precautions shall be
31、taken to avoid inhalation of asbestos dust. 1 Scope This part of ISO 1833 specifies a method, by heating, to determine the percentage of cellulosic fibre in textiles made of binary mixtures of cotton or regenerated cellulose and chrysotile and crocidolite asbestos. This method may be applicable to o
32、ther types of asbestos, subject to agreement between the interested parties. NOTE This method differs in principle from the general method based on selective solubility set out in ISO 1833-1. 2 Normative references The following referenced documents are indispensable for the application of this docu
33、ment. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 1833-1, Textiles Quantitative chemical analysis Part 1: General principles of testing 3 Principle The cellulosic fibres are remove
34、d from a known dry mass of the mixture by heating at (450 10) C for 1 h. The residue is weighed; its corrected mass is expressed as a percentage of the dry mass of the mixture. The percentage of cellulosic fibre is calculated by the difference. NOTE The preliminary removal of non-fibrous matter is n
35、ot necessary. 4 Reagents Use the reagents described in ISO 1833-1. BS EN ISO 1833-19:2010ISO 1833-19:2006(E) 2 ISO 2006 All rights reserved5 Apparatus Use the apparatus described in ISO 1833-1 together with those given in 5.1, 5.2 and 5.3. 5.1 Weighing bottle. 5.2 Crucible. 5.3 Electric furnace, wit
36、h automatic temperature control at (450 10) C. 6 Sampling Take a laboratory test sample that is representative of the laboratory bulk sample and sufficient to provide all the specimens, each of about 5 g, that are required. NOTE Pre-treatment of the laboratory test sample, described in ISO 1833-1, i
37、s not applicable to the analysis of this mixture. 7 Test procedure Follow the general procedure given in ISO 1833-1, and then proceed as follows. Take from the laboratory test sample, a test specimen weighing about 5 g. Determine the dry mass of the test specimen accurately in a weighing bottle, tra
38、nsfer it to an open crucible of known mass and heat it in the electric furnace with automatic temperature control at (450 10) C for 1 h. Cool the crucible and its contents to room temperature in a desiccator. Determine the mass of the crucible and residue within 2 min of its removal from the desicca
39、tor. 8 Calculation and expression of results Calculate the results as described in the general instructions of ISO 1833-1. The value of d is 1,02. BS EN ISO 1833-19:2010This page deliberately left blankThis page deliberately left blankBSI is the independent national body responsible for preparing Br
40、itish Standardsand other standards-related publications, information and services. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.British Standards Institution (BSI)raising standards worldwideBSI Group Headquarters389 Chiswick High
41、Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards are updated by amendment or revision. Users of British Stan-dards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and serv-ices. We woul
42、d be grateful if anyone finding an inaccuracy or ambiguity whileusing this British Standard would inform the Secretary of the technical com-mittee responsible, the identity of which can be found on the inside frontcover.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers Members an individua
43、l updating service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying standardsYou may buy PDF and hard copy versions of standards directly using acredit card from the BSI Shop on the website
44、 addition all orders for BSI, international and foreign standards publicationscan be addressed to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: In response to orders for international standards, it is BSI policy tosupply the BSI implementation of those that have been
45、 publishedas British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, Europeanand international standards through its Knowledge Centre.Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005Email: Various BSI electronic information service
46、s are also available whichgive details on all its products and services. Tel: +44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048Email: BSI Subscribing Members are kept up to date with standardsdevelopments and receive substantial discounts on the purchase priceof standards. For details of these and other
47、benefits contact Membership Ad-ministration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via BritishStandards Online can be found at information about BSI is available on the BSI website at www.bsi- subsists in all BSI publicati
48、ons. BSI also holds the copyright,in the UK, of the publications of the international standardization bodies. Ex-cept as permitted under the Copyright, Designs and Patents Act 1988 no ex-tract may be reproduced, stored in a retrieval system or transmitted in anyform or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the freeuse, in the course of implementing the standard of necessary details such assymbols, and size, type or grade designations. If these details are to
