1、BRITISH STANDARD Technical product BS EN IS0 3098-2:2000 documentation - Lettering - Part 2: Latin alphabet, numerals and marks The European Standard EN IS0 309822000 has the status of a British Standard ICs 01.100.01; 01.110 NO COPYING WHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW STD-B
2、SI BS EN IS0 3098-2-ENGL 2000 lb24bb7 0882b87 VLb BS EN IS0 3098-2:2000 This British Standard, having been prepared under the direction of the Consumer products and Services Sector Committee, was published under 12053 the authority of the Standards Committee and comes into effect on 16 August 2000 A
3、md. No. Comgendum .l O BSI 11-2000 National foreword Date Comments November Incorporaling Annex ZA 2000 This British Standard is the official English language version of EN IS0 309-22. It is identical with IS0 309822000. This standard, together with BS 8888 and other implemented European and Interna
4、tional Standards listed in annexes A and B of BS 8888, supersedes all parts of BS 308 which are withdrawn. The European and Intemational Standards that were implemented to form subsections of Part 3 of BS 308 and were dual numbered, are now listed by the implementation number only, e.g. BS EN IS0 xx
5、xx. The pocket guide previously adable is currently under review. The UK participation in its preparation was entrusted by Technical Committee TDW/4, Engineering drawing, metrology, precision measurement and all related documentation, to Subcommittee TDW/U-/l, General drawing principles, conventions
6、 and related documentation, which has the responsibility to: - aid enquirers to understand the text; - present to the responsible intedonal/European committee any enquiries on the interpretation, or proposais for change, and keep the UK interests informed; - monitor related intemational and European
7、 developments and promulgate them in the UK. A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references Attention is drawn to the fact that CEN and CENELEC standards normaliy include an annex which lists nomiative references to intemational
8、 publications with their correspondmg European publications. The British Standards which implement these international or European publications may be found in the BSI Standards Catalogue under the section entitled “International Stan& Correspondence Index”, or by using the Find facility of the BSI
9、Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary o
10、f pages This document comprises a front cover, an inside front cover, the EN IS0 title page, the EN IS0 foreword page, the IS0 title page, pages ii and iii, a blank page, pages 1 to 5, the annex ZA page, an inside back cover and a back cover. The BSI copyright notice displayed in this document indic
11、ates when the document was last issued. ISBN O 580 36252 3 STD-BSI BS EN IS0 3078-2-ENGL 2000 M lb2Ybb7 0882bAd 352 M EUROPEAN STANDARD EN IS0 39-2 NORME EUROPENNE EUROPISCHE NORM May 2000 ICs 01.100.01 English version Technical product documentation - Lettering - Part 2: Latin alphabet, numeral and
12、 marks (IS0 3098-2:2000) Documentation technique de produits - Ecriture - Partie 2: Alphabet latin, chiffres et signes (IS0 3098-2:2000) Technische Produktdokumentation - Schriften - Teil 2: Lateinische Schriftzeichen, Ziffern und Zeichen (IS0 3098- 2:2000) This European Standard was approved by CEN
13、 on 1 May 2000. CEN members are bound to comply with the CENICENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may
14、be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Centr
15、al Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom
16、. EUROPEAN COMMKEE FOR STANDARDIZATION COMITE EUROPEEN DE NORMALISATION EUROPISCHES KOMITEE FUR NORMUNG Central Secretariat: rue de Stassart, 36 8-1050 Brussels O 2000 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN IS0 3098-2:2000
17、 E Foreword The text of the International Standard IS0 3098-2:2000 has been prepared by Technical Committee ISOTTC 1 O “Technical drawings, product definition and related documentation“ in collaboration with CEWCMC. This European Standard shall be given the status of a national standard, either by p
18、ublication of an identical text or by endorsement, at the latest by November 2000, and conflicting national standards shall be withdrawn at the latest by November 2000. According to the CENKENELEC Internal Regulations, the national standards organizations of the following countries are bound to impl
19、ement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of the International Standard IS0 3098-2:2000
20、was approved by CEN as a European Standard without any modification. NOTE: Normative references to International Standards are listed in annex ZA (normative). STD.BS1 BS EN IS0 3098-2-ENGL 2000 W Lb24bb 0882b0 TOO EN IS0 3098-2:2000 INTERNATIONAL STANDARD IS0 Second edition 2000-05-01 Technical prod
21、uct documentation - Lettering - Part 2: Latin alphabet, numerals and marks Documentation technique de produits - crifure - Partie 2: Alphabet latin, chiffres et signes Reference number IS0 3098-2:2000(E) STD-BSI BS EN IS0 3098-2-ENGL 2000 Lb24bb9 0882bL 947 EN IS0 3098-22000 Foreword IS0 (the Intern
22、ational Organization for Standardization) is a worldwide federation of national standards bodies (IS0 member bodies). The work of preparing International Standards is normally carried out through IS0 technical committees. Each member body interested in a subject for which a technical committee has b
23、een established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. IS0 collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical sta
24、ndardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at l
25、east 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this part of IS0 3098 may be the subject of patent rights. IS0 shall not be held responsible for identifying any or all such patent rights. International Standard IS0 3098-2 was prepared
26、 by Technical Committee ISOTTC 1 O, Technical drawings, product definition and related documentation, Subcommittee SC 1 , Basic conventions. This second edition of IS0 3098-2 cancels and replaces the first edition (IS0 3098-1:1974), which has been technically revised. IS0 3098 consists of the follow
27、ing parts, under the general title Technical product documentation - Lettering: - Part O: General requirements becomes Part 1 with the next revision - Part 2: Latin alphabet, numerals and marks - Part 3: Greek alphabet - Part 4: Diacritical and particular marks for the latin alphabet - Part 5: CAD l
28、ettering of the Latin alphabet, numerals and marks - Part 6: Cyrillic alphabet iii STD-BSI BS EN IS0 3098-2-ENGL 2000 m 1b2Libb9 0882b2 883 m EN IS0 3098-2:2000 Technical product documentation - Lettering - Part 2: Latin alphabet, numerals and marks 1 Scope This part of IS0 3098 specifies the Latin
29、alphabet, numerals and marks for use on technical drawings and associated documents. It primarily concerns letters written with the aid of stencils, but is equally applicable to freehand lettering or other appropriate methods. 2 Normative reference The following normative document contains provision
30、s which, through reference in this text, constitute provisions of this part of IS0 3098. For dated references, subsequent amendments to, or revisions of, this publication do not apply. However, parties to agreements based on this part of IS0 3098 are encouraged to investigate the possibility of appl
31、ying the most recent edition of the normative document indicated below. For undated references, the latest edition of the normative document referred to applies. Members of IS0 and IEC maintain registers of currently valid International Standards. IS0 3098-0: 1 997, Technical product documentation -
32、 Lettering - Part O: General requirements. 3 General requirements and dimensions For the general requirements and the dimensions of characters, numerals and marks, see IS0 3098-0. To obtain constant line density, avoid blotting at intersecting lines and facilitate writing, the characters shall be fo
33、rmed so that lines cross, or meet, at approximate right angles. 4 Examples The following examples are given as a guide to illustrate the application of general requirements and dimensions of the Latin alphabet, numerals and marks. 1 STD.BS1 BS EN IS0 3078-2-ENGL 2000 9 Lb2LibbS 0882b3 7LT EN IS0 309
34、8-2:2000 Lettering A, sloping STD.BSI BS EN IS0 3078-2-ENGL 2000 Lb24bb7 0882b74 b5b EN IS0 3098-2:2000 Lettering A, vertical 3 STD-BSI BS EN IS0 309-2-ENGL 2000 H lb24bb9 OB2b95 592 EN IS0 3098-22000 Lettering B, sloping 4 STD*BSI BS EN IS0 3078-2-ENGL 2000 = LbZqbb7 O882b7b 427 EN IS0 3098-2:2000
35、Lettering B, vertical Preferred application 5 STD-BSI BS EN IS0 3078-2-ENGL 2000 Lb2YbbS 0882b77 3b5 EN IS0 3098-2:2000 Annex ZA (normative) Normative references to international publications with their relevant European publications This European Standard incorporates by dated or undated reference,
36、 provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated i
37、n it by amendment or revision. For undated references the latest edition of the publication referred to applies. Publication Year Title EN IS0 3098-0 1997 Technical product documentation - Lettering - EN IS0 3098-0 1997 Part O: General requirements BS EN IS0 309&2:2000 BSI 389 Chiswick H&L Road Lond
38、on w4 4AL BSI - British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or
39、revision. Users of British standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quaiity of our products and services. We would be gratefui if anyone finding an inaccuracy or ambiguity while using this British Standard would info
40、rm the Secretary of the technical committee responsible, the identity of which can be found on the inside hnt cover. Tel O20 8996 9ooo. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatka& receive the latest editions of standards
41、. Buying standards orders for all BSI, intrnational and foreign standards publications should be addressed to Customer Services. Tek O20 8996 9001. Fax 020 8996 7001. In response to orders for intemational standards, it is BSI policy to supply the BSI implementation of those that have been published
42、 as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which
43、 give details on all its products and services. Contact the information Centre. Tel 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benef
44、its contact Membership Am on. Tel O20 8996 7002. Fax 020 8996 7001. Copyright Copyright subsists in all BSI pubhatiom. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no ex
45、tract may be reproduced, stored in a retried system or transmitted in any form or by any means - electronic, photocopying, recording or otherwise - without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as
46、 symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained if permission is granted, the terms may include royalty payments or a licensing agreement Details and advice can be obtained from the Copyright Manager. Tek 020 8996 7070.
