1、BRITISH STANDARD BS EN ISO 3977-5:2003 Incorporating Amendment No. 1 (renumbers BS ISO 3977-5:2001 as BS EN ISO 3977-5:2003) Gas turbines Procurement Part 5: Applications for petroleum and natural gas industries The European Standards EN ISO 3977-5:2003 has the status of a British Standard ICS 27.04
2、0; 75.180.10; 75.180.20 BS EN ISO 3977-5:2003 This British Standard, having been prepared under the direction of the Engineering Sector Policy and Strategy Committee was published under the authority of the Standards Policy and Strategy Committee on 6 March 2002 BSI 24 March 2003 ISBN 0 580 39056 X
3、National foreword This British Standard is the official English language version of EN ISO 3977-5:2003. It is identical with ISO 3977-5:2001. The UK participation in its preparation was entrusted to Technical Committee MCE/16, Gas turbines, which has the responsibility to: A list of organizations re
4、presented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Ind
5、ex”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself con
6、fer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulg
7、ate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN ISO title page, the EN ISO foreword page, the ISO title page, pages ii and iv, pages 1 to 4, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates wh
8、en the document was last issued. Amendments issued since publication Amd. No. Date Comments 14278 24 March 2003 Renumbers BS ISO 3977-5:2001 as BS EN ISO 3977-5:2003EUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM ENISO39775 February2003 ICS27.040;75.180.10;75.180.20 Englishversion GasturbinesProcurem
9、entPart5:Applicationsforpetroleum andnaturalgasindustries(ISO39775:2001) TurbinesgazSpcificationspourlacquisitionPartie5: Applicationspourlesindustriesduptroleetdugaznaturel (ISO39775:2001) GasturbinenBeschaffungTeil5:Anwendungeninder ErdlundErdgasindustrie(ISO39775:2001) ThisEuropeanStandardwasappr
10、ovedbyCENon18December2002. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtot
11、heManagementCentreortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheManagementCentrehasthesamestatusasthe official versions. CENmembersarethenatio
12、nalstandardsbodiesofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Greece, Hungary,Iceland,Ireland,Italy,Luxembourg,Malta,Netherlands,Norway,Portugal,SlovakRepublic,Spain,Sweden,Switzerland and UnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKO
13、MITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2003CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.ENISO39775:2003EForeword ThetextofISO39775:2001hasbeenpreparedbyTechnicalCommitteeISO/ TC192, Gas turbines,oftheInternationalOrganization
14、forStandardization(ISO)andhasbeentakenoveras ENISO39775:2003byTechnicalCommitteeCEN/TC12,Materials,equipmentandoffshore structuresforpetroleumandnaturalgasindustries,theSecretariatofwhichisheldbyAFNOR. ThisEuropeanStandardshallbegiventhestatusofanationalstandard,eitherbypublicationof anidenticaltext
15、orbyendorsement,atthelatestbyAugust2003,andconflictingnational standardsshallbewithdrawnatthelatestbyAugust2003. AccordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsof thefollowingcountriesareboundtoimplementthisEuropeanStandard:Austria,Belgium,Czech Republic,Denmark,Finlan
16、d,France,Germany,Greece,Hungary,Iceland,Ireland,Italy, Luxembourg,Malta,Netherlands,Norway,Portugal,Slovakia,Spain,Sweden,Switzerlandand theUnitedKingdom. Endorsementnotice ThetextofISO39775:2001hasbeenapprovedbyCENasENISO39775:2003withoutany modifications. ENISO39775:2003 INTERNATIONAL STANDARD ISO
17、 3977-5 First edition 2001-12-15 Reference number ISO 3977-5:2001(E) Gas turbines Procurement Part 5: Applications for petroleum and natural gas industries Turbines gaz Spcifications pour lacquisition Partie 5: Applications pour les industries du ptrole et du gaz naturelENISO39775:2003 ii ENISO39775
18、:2003 iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for
19、 which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on a
20、ll matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International
21、Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this part of ISO 3977 may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Internationa
22、l Standard ISO 3977-5 was prepared by Technical Committee ISO/TC 192, Gas turbines, in collaboration with Technical Committee ISO/TC 67, Materials, equipment and offshore structures for petroleum and natural gas industries, Subcommittee SC6, Processing equipment and systems. Documents taken into acc
23、ount in the development of ISO 3977 include API STD 616, API RP 11PGT and the ASME B133 series of documents. ISO 3977 consists of the following parts, under the general title Gas turbines Procurement: Part 1: General introduction and definitions Part 2: Standard reference conditions and ratings Part
24、 3: Design requirements Part 4: Fuels and environment Part 5: Applications for petroleum and natural gas industries Part 6: Combined cycles Part 7: Technical information Part 8: Inspection, testing, installation and commissioning Part 9: Reliability, availability, maintainability and safety ENISO397
25、75:2003 iv Introduction Users of this part of ISO 3977 should be aware that further or differing requirements may be needed for individual applications. This part of ISO 3977 is not intended to inhibit a packager from offering, or the purchaser from accepting, alternative equipment or engineering so
26、lutions for the individual application. This may be particularly applicable where there is innovative or developing technology. Where an alternative is offered, the packager should identify any variations from this part of ISO 3977 and provide details. ENISO39775:2003 ANRETNIITOTS LANDNADRA OSI -779
27、31002:5)E(1 Gas turbines Procurement Part 5: Applications for petroleum and natural gas industries 1 Scope This part of ISO 3977 specifies requirements and gives recommendations for the design, materials, fabrication, inspection, testing and preparation for shipment of packaged gas turbines for use
28、in drilling, production, refining and the transport by pipelines of petroleum and natural gas. It is applicable to the procurement of gas turbines and gas turbine systems, including gas turbines for combined cycle systems, and their auxiliaries by a purchaser from a packager. This part of ISO 3977 i
29、s not intended to deal with local or national legislative requirements to which the installation may be required to conform. 2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this part of ISO 3977. For dated re
30、ferences, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this part of ISO 3977 are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated refere
31、nces, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards. ISO 3977-1, Gas turbines Procurement Part 1: General introduction and definitions ISO 3977-2, Gas turbines Procurement Part 2: Standard refere
32、nce conditions and ratings ISO 3977-3, Gas turbines Procurement Part 3: Design requirements ISO 3977-4, Gas turbines Procurement Part 4: Fuels and environment ISO 3977-7, Gas turbines Procurement Part 7: Technical information ISO 3977-8, Gas turbines Procurement Part 8: Inspection, testing, installa
33、tion and commissioning ISO 3977-9, Gas turbines Procurement Part 9: Reliability, availability, maintainability and safety ISO 11086, Gas turbines Vocabulary 3 Terms and definitions For the purposes of this part of ISO 3977, the terms and definitions given in ISO 11086, ISO 3977-1, ISO 3977-3, ISO 39
34、77-4, ISO 3977-8 and ISO 3977-9 apply. ENISO39775:2003 2 4 Requirements for gas turbines for the petroleum and natural gas industries 4.1 Reference conditions and ratings Standard reference conditions for gas turbines shall be as defined in ISO 3977-2. The packager shall declare standard ratings ass
35、ociated with the operational modes defined in ISO 3977-2. The packager shall also declare the site power rating as specified in ISO 3977-2, for the specified site conditions of the installation and operating modes under which the plant is intended to run in service. 4.2 Design requirements 4.2.1 Bas
36、ic requirements The minimum basic requirements for the procurement of gas turbines and gas turbine systems are specified in ISO 3977-3. ISO 3977-3 also provides assistance and technical information to be used in the procurement. The purchaser shall provide site condition data and shall specify the p
37、ackage site specific operating point(s) on data sheets in accordance with ISO 3977-3. The packager shall review and comment the purchasers piping, ducting and foundation drawings as specified in ISO 3977-3. Operational requirements shall be in accordance with ISO 3977-3. Service requirements shall b
38、e in accordance with ISO 3977-3. Rotating equipment requirements shall be in accordance with ISO 3977-3. Other equipment requirements shall be in accordance with ISO 3977-3. Vibrations and dynamics shall be in accordance with ISO 3977-3. 4.2.2 Packaging and auxiliary equipment Packaging and auxiliar
39、y equipment shall be in accordance with ISO 3977-3. The packager shall provide, as a minimum, the equipment in ISO 3977-3 listed as the minimum to be provided as the package. Any other equipment required shall be as specified by the purchaser and shall be included in the packagers scope of supply. T
40、his equipment shall be assembled (packaged) to the maximum extent practical. Auxiliary equipment may include a) starting systems, b) mounting systems, c) enclosure and fire protection, d) air inlet systems, e) piping, f) oil systems, g) fuel system, h) electrical systems, i) exhaust system, ENISO397
41、75:2003 3 j) driven equipment (compressor, pump, generator), and k) seal system for the above. 4.2.3 Control and instrumentation Control and protection systems, and associated instrumentation, shall be in accordance with ISO3977-3. Consideration shall be given to starting, loading and shutdown. Prov
42、isions for ventilation and purging shall be in accordance with ISO 3977-3. Fuel control, governing and limiting, and emission control shall be in accordance with ISO 3977-3. Overspeed protection and protection systems shall be in accordance with ISO 3977-3. Compressor wash systems shall be in accord
43、ance with ISO 3977-3. Considerations for the control system shall be in accordance with ISO 3977-3. Control panel installation shall be in accordance with ISO 3977-3. Operability and diagnostics shall be in accordance with ISO 3977-3. Data communications shall be in accordance with ISO 3977-3. 4.3 F
44、uels and environment The responsibilities of the purchaser and of the packager with respect to the fuels and the relationship to the procurement of a gas turbine system shall be in accordance with ISO 3977-4. 4.4 Technical information The information to be submitted during the proposal and contract
45、stages of a project covering the packagers scope of supply is defined in ISO 3977-7. The purchaser shall complete the data sheets and Packager Documentation Requirements from ISO 3977-7. The purchaser shall specify the performance data needed for the specific application in accordance with ISO 3977-
46、7. The packager shall provide the Proposal and the Contract Documentation in accordance with ISO 3977-7. 4.5 Inspection, testing, installation and commissioning Inspection, testing, installation and commissioning shall be in accordance with ISO 3977-8. ISO 3977-8 states the principles for systems an
47、d procedures to assure the integrity of the packagers products and services, and also outlines the responsibilities between the purchaser and the packager. Preparation for storage and shipment shall be in accordance with ISO 3977-8. 4.6 Reliability, availability, maintainability and safety Exchange
48、of information about reliability, availability, maintainability and safety between gas turbine manufacturers, packagers, purchasers, users, consultants, regulatory bodies and others shall be in accordance with ISO 3977-9. ENISO39775:2003 4 Bibliography 1 API STD 616, Gas Turbines for the Petroleum, Chemical and Gas
