1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Water quality - SamplingPart 3: Preservation and handling of water samplesBS EN ISO 56673:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 5667-3 June 2018 ICS 13.060.45 Supersedes EN ISO 5667-3:2012English
2、Version Water quality - Sampling - Part 3: Preservation and handling of water samples (ISO 5667-3:2018) Qualit de leau - chantillonnage - Partie 3: Conservation et manipulation des chantillons deau (ISO 5667-3:2018) Wasserbeschaffenheit - Probenahme - Teil 3: Konservierung und Handhabung von Wasserp
3、roben (ISO 5667-3:2018) This European Standard was approved by CEN on 9 June 2018. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and
4、 bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the r
5、esponsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav
6、 Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUR
7、OPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 5667-3:2018 ENational forewordThis British Standard
8、is the UK implementation of EN ISO 56673:2018. It is identical to ISO 56673:2018. It supersedes BS EN ISO 56673:2012, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee EH/3/6, Sampling (of technical committee EH/3 Water quality).A list of organizations r
9、epresented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978
10、0 580 96052 9ICS 13.060.45Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH S
11、TANDARDBS EN ISO 56673:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 5667-3 June 2018 ICS 13.060.45 Supersedes EN ISO 5667-3:2012English Version Water quality - Sampling - Part 3: Preservation and handling of water samples (ISO 5667-3:2018) Qualit de leau - chantillonnage - Partie 3:
12、Conservation et manipulation des chantillons deau (ISO 5667-3:2018) Wasserbeschaffenheit - Probenahme - Teil 3: Konservierung und Handhabung von Wasserproben (ISO 5667-3:2018) This European Standard was approved by CEN on 9 June 2018. CEN members are bound to comply with the CEN/CENELEC Internal Reg
13、ulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN mem
14、ber. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
15、CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland
16、, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CEN All rights of exp
17、loitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 5667-3:2018 EBS EN ISO 56673:2018EN ISO 5667-3:2018 (E) 3 European foreword This document (EN ISO 5667-3:2018) has been prepared by Technical Committee ISO/TC 147 “Water quality“ in collaboration with
18、 Technical Committee CEN/TC 230 “Water analysis” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2018, and conflicting national standards shall be
19、 withdrawn at the latest by December 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 5667-3:2012. According to
20、the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
21、 Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 5667-3:2018 has been approved by CEN as EN ISO 5667-3:201
22、8 without any modification. BS EN ISO 56673:2018ISO 5667-3:2018(E)Foreword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 14 Sampling and chain of custody 25 Reagents and materials . 26 Containers . 56.1 Container selection and preparation . 56.2 Filtration on site . 56
23、.3 Filling the container . 57 Sample handling and preservation . 57.1 Sample handling and preservation for physical and chemical examination . 57.2 Sample handling and preservation for biological examination 67.3 Sample handling and preservation for radiochemical analysis 78 Sample transport . 79 Id
24、entification of samples . 810 Sample reception . 811 Sample storage . 8Annex A (informative) Techniques for sample preservation .10Annex B (informative) Container preparation 44Annex C (informative) Protocol as used in Dutch validation studies .45Bibliography .47 ISO 2018 All rights reserved iiiCont
25、ents PageBS EN ISO 56673:2018ISO 5667-3:2018(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each mem
26、ber body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International El
27、ectrotechnical Commission (IEC) on all matters of electrotechnical standardization. The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different type
28、s of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be
29、 held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www .iso .org/patents).Any trade name used in this document is infor
30、mation given for the convenience of users and does not constitute an endorsement. For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (
31、WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www .iso .org/iso/foreword .html.This document was prepared by Technical Committee ISO/TC 147, Water quality, Subcommittee SC 6, Sampling (general methods).This fifth edition cancels and replaces the fourth edition (ISO
32、5667-3:2012), of which it constitutes a minor revision. The changes compared to the previous edition are as follows: updated references in Table A.1; clarification in the Introduction concerning use of the preservation times and conditions set out in Table A.1.A list of all parts in the ISO 5667 ser
33、ies can be found on the ISO website.iv ISO 2018 All rights reservedBS EN ISO 56673:2018ISO 5667-3:2018(E)IntroductionThis document is intended to be used in conjunction with ISO 5667-1, which deals with the design of sampling programmes and sampling techniques.Where possible this document has been b
34、rought into line with current standards. Where new research or validation results have provided new insights, the latest knowledge has been used.Guidance on validation protocols can be found in ISO 17034.ISO 5667-3 provides in Table A.1 validated preservation times and/or conditions as well as descr
35、iptions of best practice. Table A.1 also refers, for each analyte, to those ISO standards available at the date of publication of this ISO 5667-3. This is however not an exhaustive list. Other methods may be used when they have been validated. However, it is strongly recommended that where a method
36、validation is not available, the preservation times for the analyte as listed in Table A.1 for ISO test methods be followed.The preservation and storage conditions and maximum storage times per analyte as listed in Table A.1 should be regarded as default conditions to be applied in the absence of an
37、y other information.However, if validation of preservation techniques and holding times has been carried out, relative to specific circumstances and matrices, by a laboratory, then, provided that it can produce evidence of this validation where they differ from those set out in Table A.1 of this sta
38、ndard, these validated preservation and storage conditions and maximum storage times are deemed acceptable for use by the validating laboratories.Attention is drawn to the proposed development of a new part in the ISO 5667 series, which further elaborates on ISO 5667-3:2018, Annex C, and which will
39、contain guidelines and the elaboration of the required techniques of how to validate new storage times or preservative methods and details of the techniques described. ISO 2018 All rights reserved vBS EN ISO 56673:2018Water quality Sampling Part 3: Preservation and handling of water samplesNOTICE Th
40、is document and the analytical International Standards listed in Annex A are complementary. Where no analytical International Standard is applicable, the technique(s) described in Tables A.1 to A.3 take(s) normative status.When new or revised analytical standards are developed with storage times or
41、preservative techniques differing from those in Tables A.1 to A.3, then the storage times or preservative techniques should be validated and presented to ISO/TC 147/SC 6/WG 3 for incorporation into the next revision of this document.1 ScopeThis document specifies general requirements for sampling, p
42、reservation, handling, transport and storage of all water samples including those for biological analyses. It is not applicable to water samples intended for microbiological analyses as specified in ISO 19458, ecotoxicological assays, biological assays and passive sampling as specified in the scope
43、of ISO 5667-23.This document is particularly appropriate when spot or composite samples cannot be analysed on site and have to be transported to a laboratory for analysis.2 Normative referencesThe following documents are referred to in the text in such a way that some or all of their content constit
44、utes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 3696, Water for analytical laboratory use Specification and test methodsISO 5667 (all parts), Water q
45、uality SamplingISO 19458, Water quality Sampling for microbiological analysis3 Terms and definitionsFor the purposes of this document, the following terms and definitions apply.ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC Electropedia: avai
46、lable at http: /www .electropedia .org/ ISO Online browsing platform: available at https: /www .iso .org/obp3.1integrityproperty that the parameter(s) of interest, information or content of the sample container has not been altered or lost in an unauthorized manner or subject to loss of representati
47、venessINTERNATIONAL STANDARD ISO 5667-3:2018(E) ISO 2018 All rights reserved 1BS EN ISO 56673:2018ISO 5667-3:2018(E)3.2sample preservationany procedure used to stabilize a sample in such a way that the properties under examination are maintained stable from the collection step until preparation for
48、analysisNote 1 to entry: Different analytes may require several samples from the same source that are stabilized by different procedures.SOURCE: ISO 11074:2015, 4.4.20, modified Note 1 to entry has been added.3.3sample storageprocess, and the result of keeping a sample available under predefined con
49、ditions, usually for a specified time interval between collection and further treatment of a sampleNote 1 to entry: Specified time is the maximum time interval.SOURCE: ISO 11074:2015, 4.4.22, modified Note 1 to entry has been added; “soil sample” has been changed to “sample”.3.4storage timeperiod of time between filling of the sample container and further treatment of the sample in the laboratory, if stored under predefined conditionsNote 1 to entry: Sampling finishes as soon as the sample container has been fill
