1、BSI Standards PublicationBS EN ISO 18541-2:2014Road vehicles Standardizedaccess to automotive repairand maintenance information(RMI)Part 2: Technical requirementsBS EN ISO 18541-2:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO18541-2:2014.The UK partic
2、ipation in its preparation was entrusted to TechnicalCommittee AUE/20, Vehicle on-board diagnostics, repair andmaintenance information.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovis
3、ions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2014. Published by BSI StandardsLimited 2014ISBN 978 0 580 71389 7ICS 43.040.15; 43.180Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was pub
4、lished under the authority of theStandards Policy and Strategy Committee on 30 September 2014.Amendments issued since publicationDate Text affectedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 18541-2 September 2014 ICS 43.040.15; 43.180 English Version Road vehicles - Standardized access
5、 to automotive repair and maintenance information (RMI) - Part 2: Technical requirements (ISO 18541-2:2014) Vhicules routiers - Normalisation de laccs aux informations relatives la rparation et la maintenance pour lautomobile (RMI) - Partie 2: Exigences techniques (ISO 18541-2:2014) Straenfahrzeuge
6、- Standardisierter Zugang zur Reparatur und Wartung (RMI) - Teil 2: Technische Anforderungen (ISO 18541-2:2014) This European Standard was approved by CEN on 13 March 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Europe
7、an Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions
8、(English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belg
9、ium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switze
10、rland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national
11、 Members. Ref. No. EN ISO 18541-2:2014 EBS EN ISO 18541-2:2014EN ISO 18541-2:2014 (E) 3 Foreword This document (EN ISO 18541-2:2014) has been prepared by Technical Committee ISO/TC 22 “Road vehicles” in collaboration with Technical Committee CEN/TC 301 “Road vehicles” the secretariat of which is hel
12、d by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2015, and conflicting national standards shall be withdrawn at the latest by March 2015. Attention is drawn to the possibility tha
13、t some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to
14、 implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Ro
15、mania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 18541-2:2014 has been approved by CEN as EN ISO 18541-2:2014 without any modification. BS EN ISO 18541-2:2014ISO 18541-2:2014(E) ISO 2014 All rights reserved iiiContents PageForew
16、ord vIntroduction vi1 Scope . 12 Normative references 13 Terms, definitions, symbols and abbreviated terms . 13.1 Terms and definitions . 13.2 Abbreviated terms . 24 Conventions . 35 Requirements overview and principles . 35.1 Basic principles for requirements definition 35.2 Requirements clustering
17、 36 Requirements cluster 1 Access-related data administration . 76.1 TREQ-1 General access-related data administration . 76.2 TREQ-2, TREQ-3 Administration of IO and IO employee data by the VM 76.3 TREQ-4 Administration of payment data by the VM 86.4 TREQ-5 Administration of access event data by the
18、 VM 96.5 TREQ-6 Administration of access event data to security-related RMI by the VM. 97 Requirements cluster 2 IT architecture .107.1 TREQ-7 Conceptual architecture 107.2 TREQ-8 Implementation principles . 128 Requirements cluster 3 External interfaces 158.1 TREQ-9 Vehicle communication interface
19、(VCI) .158.2 TREQ-10 Trust centre (certificate management) 198.3 TREQ-11 Parts ordering for security-related features 198.4 TREQ-12 Partnered accessory provider systems 199 Requirements cluster 4 Technical infrastructure .209.1 TREQ-13 Type of device. 209.2 TREQ-14 Hardware features 209.3 TREQ-15 Op
20、erating systems 209.4 TREQ-16 Web browsers . 209.5 TREQ-17 Presentation formats for information packages 219.6 TREQ-18 Internet connection . 219.7 TREQ-19 Performance of the VM RMI system 2110 Requirements cluster 5 Co-existence of VM software on IO client .2210.1 TREQ-20 Requirements for installing
21、 VM-specific software on the IO client .2210.2 TREQ-21 Requirements for updating of installed VM data and applications on the IO client 2310.3 TREQ-22 Requirements for the operation of VM-specific software on the IO client 2310.4 TREQ-23 Requirements for the uninstalling of VM-specific software on t
22、he IO client .2410.5 TREQ-24 Requirements for restoring in case of an abnormal termination of the VM-specific software on the IO client . 2411 Requirements cluster 6 Operations .2511.1 TREQ-25 VM RMI system availability time 2511.2 TREQ-26 Support for the usage of the VM RMI system 2511.3 TREQ-27 Op
23、eration of the IO PC. 2612 Requirements cluster 7 Functional user interface .2612.1 TREQ-28 Functional user interface 26Annex A (informative) PC specification 28BS EN ISO 18541-2:2014ISO 18541-2:2014(E)iv ISO 2014 All rights reservedBibliography .29BS EN ISO 18541-2:2014ISO 18541-2:2014(E)ForewordIS
24、O (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical co
25、mmittee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electro
26、technical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was draf
27、ted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rig
28、hts. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constit
29、ute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary informationISO 18541
30、-2:2013 was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 301, Road vehicles, in collaboration with ISO Technical Committee ISO/TC 22, Road vehicles, Subcommittee SC 3, Electrical and electronic equipment, in accordance with the agreement on technical cooper
31、ation between ISO and CEN (Vienna Agreement).ISO 18541 consists of the following parts, under the general title Road vehicles Standardized access to automotive repair and maintenance information (RMI): Part 1: General information and use case definition Part 2: Technical requirements Part 3: Functio
32、nal user interface requirements Part 4: Conformance test ISO 2014 All rights reserved vBS EN ISO 18541-2:2014ISO 18541-2:2014(E)IntroductionThis set of standards includes the requirements to be fulfilled by Repair and Maintenance Information (RMI) systems as applied by the European Commission Enterp
33、rise and Industry Directorate-General, Consumer goods Automotive industry EC mandate M/421,5dated Brussels, 21 January 2008.This mandate relates to the EC type-approval system for vehicles falling into the scopes of Directives 70/156/EEC (replaced by 2007/46/EC8), 2002/24/EC6and 2003/37/EC7and, in p
34、articular, to requirements for access to vehicle repair and maintenance information by independent operators.This International Standard only covers access to automotive repair and maintenance information for light passenger and commercial vehicles (see NOTE 1) and heavy duty vehicles (see NOTE 2) b
35、ased on Directive 70/156/EEC (replaced by 2007/46/EC8).The purpose of the EC Mandate M/421 is to develop a standard or set of standards which specify the requirements to provide standardized access to automotive repair and maintenance information (RMI) for independent operators.The information inclu
36、ded in this part of ISO 18541 derives from the legislative requirements on European level in the field of RMI and related security requirements and can be referenced by legislation in other countries.NOTE 1 Regulation (EC) No 715/2007 of the european parliament and of the council of 20 June 2007 on
37、type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information and Commission Regulation (EC) No 692/2008 of 18 July 2008 implementing and amending Regulation (EC) No 715/2007 of t
38、he European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information and amending Commission Regulation (EU) No 566/2011 of 8 June 2011 amend
39、ing Regulation (EC) No 715/2007 of the European Parliament and of the Council and Commission Regulation (EC) No 692/2008 as regards access to vehicle repair and maintenance information.NOTE 2 Regulation (EC) No 595/2009 of the european parliament and of the council of 18 June 2009 on type-approval o
40、f motor vehicles with respect to emissions from heavy duty vehicles (Euro VI) and on access to vehicle repair and maintenance information, Commission Regulation (EU) No 582/2011 of 25 May 2011 implementing and amending Regulation (EC) No 595/2009 of the European Parliament and of the Council with re
41、spect to emissions from heavy duty vehicles (Euro VI), and Commission Regulation (EU) No 64/2012 of 23 January 2012 amending Regulation (EU) No 582/2011 2011 implementing and amending Regulation (EC) No 595/2009 of the European Parliament and of the Council with respect to emissions from heavy duty
42、vehicles (Euro VI).vi ISO 2014 All rights reservedBS EN ISO 18541-2:2014Road vehicles Standardized access to automotive repair and maintenance information (RMI) Part 2: Technical requirements1 ScopeThis part of ISO 18541 includes technical requirements which are related to automotive repair and main
43、tenance information (RMI) systems in order to standardize access to RMI for independent operators.This part of ISO 18541 specifies the minimum set of technical requirements related to a vehicle manufacturers RMI system. These requirements will reflect the deriving needs from the use cases as specifi
44、ed in ISO 18541-1.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (in
45、cluding any amendments) applies.ISO 18541-1:2014, Road vehicles Standardized access to automotive RMI Part 1: General information and use case definitionISO 18541-3, Road vehicles Standardized access to automotive repair and maintenance information (RMI) Part 3: Functional user interface requirement
46、sISO 22900-2, Road vehicles Modular vehicle communication interface (MVCI) Part 2: Diagnostic protocol data unit application programming interface (D-PDU API)SAE J2534-1, Recommended Practice for Pass-Thru Vehicle ProgrammingSAE J2534-2, Optional Pass-Thru Features3 Terms, definitions, symbols and a
47、bbreviated terms3.1 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO 18541-1 apply.INTERNATIONAL STANDARD ISO 18541-2:2014(E) ISO 2014 All rights reserved 1BS EN ISO 18541-2:2014ISO 18541-2:2014(E)3.2 Abbreviated termsAPI application programming interfac
48、eCSP certificate status protocolDB databaseDLC data link cableDLL dynamic link libraryD-PDU diagnostic protocol data unitDVD optical disc storage media formatECU electronic control unitFAQ frequently asked questionsGB giga-byteGHz giga-hertzGMT Greenwich mean timeIO independent operatorIT informatio
49、n technologyLAN local area networkMVCI modular vehicle communication interfaceNAT network address translationOBD on-board diagnosticsOCSP online certificate status protocolPC personal computerPKCS public key certificate statusRMI repair and maintenance informationRS232 recommended standard 232SERMI security-related repair and maintenance informationTREQ- technical requirementTC trust centreUSB universal serial busVAT No. value added tax numberVM
