ETSI EN 300 210-2-1998 Integrated Services Digital Network (ISDN) Freephone (FPH) Supplementary Service Digital Subscriber Signalling System NO One (DSS1) Protocol Part 2 Protocol _1.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN 302-2-2017 en Adhesives for load-bearing timber structures - Test methods - Part 2 Determination of resistance to delamination.pdf

EN 302-3-2013 en Adhesives for load-bearing timber structures - Test methods - Part 3 Determination of the effect of acid damage to wood fibres by temperature and humidity cycling .pdf

EN 302-3-2017 en Adhesives for load-bearing timber structures - Test methods - Part 3 Determination of the effect of acid damage to wood fibres by temperature and humidity cycling .pdf

EN 302-4-2013 en Adhesives for load-bearing timber structures - Test methods - Part 4 Determination of the effects of wood shrinkage on the shear strength《承重木结构用胶粘剂 试验方法 第4部分 承重情况下.pdf

EN 302-5-2013 en Adhesives for load-bearing structures - Test methods - Part 5 Determination of maximum assembly time under referenced conditions《承重结构用粘合剂 试验方法 第5部分 基准条件下最大组合时间的测定》.pdf

EN 302-6-2013 en Adhesives for load-bearing timber structures - Test methods - Part 6 Determination of the minimum pressing time under referenced conditions《承重木结构用粘合剂 试验方法 第6部分 基准条.pdf

EN 302-7-2013 en Adhesives for load-bearing timber structures - Test methods - Part 7 Determination of the working life under referenced conditions《承重木结构用粘合剂 试验方法 第7部分 基准条件下工作寿命的测定.pdf

EN 302-8-2017 en Adhesives for load-bearing timber structures - Test methods - Part 8 Static load test of multiple bond line specimens in compression shear《承重木结构件用胶粘剂-试验方法-第8部分 多粘结.pdf

EN 3020-2008 en Aerospace series - Self-locking plate nuts floating two-lug in heat resisting steel FE-PA92HT (A286) silver plated - Classification 1 100 MPa (at ambient temperatur.pdf