ETSI EN 300 403-2-2000 Integrated Services Digital Network (ISDN) Digital Subscriber Signalling System No One (DSS1) Protocol Signalling Network Layer for Circuit-Mode Basic Call C.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AECMA PREN 3484-1997 Aerospace Series Steel FE-CM3801 (X5CrNiCu16-4) as Cast Homogenized Solution Treated and Precipitation Hardened Remelting Stock Edition P2《航空航天系列.钢 FE-CM3801(X.pdf

AECMA PREN 3485-1988 Aerospace Series Steel FE-CM61 Homogenised Solution Treated Precipitation Hardened and Sub Zero Rm Greater Than or Equal to 830 MPa Medium Strength Sand or Inv.pdf

AECMA PREN 3486-1988 Aerospace Series Steel FE-PM67 Solution Annealed and Precipitation Hardened 1400 Less Than or Equal to Rm Less Than or Equal to 1550 Mpa Forgings De Less Than .pdf

AECMA PREN 3487-2006 Aerospace series Steel FE-PA3601 (X6CrNiTi18-10) Air melted Softened Bar for machining a or D less than or equal to 250 mm 500 MPa less than or equal to Rm les.pdf

AECMA PREN 3488-2006 Aerospace series Steel FE-PA3601 (X6CrNiTi18-10) Air melted Softened Sheet and strip a Less than or Equal to 6 mm 500 MPa Less than or Equal to Rm Less than or.pdf

AECMA PREN 3489-1988 Aerospace Series Steel FE-PA13 Softened 500 Less Than or Equal to Rm Less Than or Equal to 750 MPa Tubes for Structures 0 5 Less Than or Equal to a Less Than o.pdf

AECMA PREN 3490-1998 Aerospace Series Steel FE-PL3901 (X15CrNi17-3) Air Melted Hardened and Tempered Bar for Machining De Less Than or Equal to 200 mm 900 MPa Less Than or Equal to.pdf

AECMA PREN 3491-1998 Aerospace Series Steel FE-PL3901 (X15CrNi17-3) Air Melted Hardened and Tempered Forgings De Less Than or Equal to 100 mm 900 MPa Less Than or Equal to Rm Less .pdf

AECMA PREN 3492-1988 Aerospace Series Steel FE-PM44 Hardened and Tempered Bar for Machining De Less Than or Equal to 150 mm Issue P 1《航空航天系列.钢 FE-PM44同质溶液锻造和沉淀硬化处理锻件Rm小于或等于1550MPa .pdf