1、 ETSI EN 300 674-2-2 V1.1.1 (2004-08)Candidate Harmonized European Standard (Telecommunications series) Electromagnetic compatibilityand Radio spectrum Matters (ERM);Road Transport and Traffic Telematics (RTTT);Dedicated Short Range Communication (DSRC)transmission equipment (500 kbit/s / 250 kbit/s
2、) operating inthe 5,8 GHz Industrial, Scientific and Medical (ISM) band;Part 2: Harmonized EN under article 3.2of the RSub-part 2: Requirements for the On-Board Units (OBU)ETSI ETSI EN 300 674-2-2 V1.1.1 (2004-08) 2 Reference DEN/ERM-TG29-001-2-2 Keywords data, DSRC, radio, regulation, RTTT, testing
3、 ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can
4、be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the r
5、eference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI docume
6、nts is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permi
7、ssion. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2004. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTMand the TIPHON logo are Trade M
8、arks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI EN 300 674-2-2 V1.1.1 (2004-08) 3 Contents Intellectual Property Rights4 Foreword.4 Introduction 5 1 Sco
9、pe 7 2 References 7 3 Definitions, symbols and abbreviations .8 3.1 Definitions8 3.2 Symbols8 3.3 Abbreviations .8 4 Technical requirements specifications .8 4.1 Environmental conditions.8 4.1.1 Environmental profile .8 4.1.2 Power supply 8 4.2 Conformance requirements 9 4.2.1 Transmitter9 4.2.1.1 M
10、aximum equivalent isotropically radiated power.9 4.2.1.2 Frequency error.9 4.2.1.3 Transmitter spectrum mask .9 4.2.1.4 Unwanted emissions9 4.2.2 Receiver spurious emissions.9 5 Testing for compliance with technical requirements9 5.1 Environmental conditions for testing .9 5.2 Essential radio test s
11、uites9 5.2.1 Transmitter9 5.2.1.1 Maximum equivalent isotropically radiated power.9 5.2.1.2 Frequency error.9 5.2.1.3 Transmitter spectrum mask .9 5.2.1.4 Unwanted emissions10 5.2.2 Receiver spurious emissions.10 5.3 Interpretation of results and measurement uncertainty.10 Annex A (normative): The E
12、N Requirements Table (EN-RT) 11 Annex B (informative): Bibliography.12 Annex C (informative): The EN title in the official languages .13 History 14 ETSI ETSI EN 300 674-2-2 V1.1.1 (2004-08) 4 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been d
13、eclared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, wh
14、ich is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs n
15、ot referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Candidate Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee Electromagnetic compatibilit
16、y and Radio spectrum Matters (ERM). The present document has been produced by ETSI in response to a mandate from the European Commission issued under Council Directive 98/34/EC (as amended) laying down a procedure for the provision of information in the field of technical standards and regulations.
17、The present document is intended to become a Harmonized Standard, the reference of which will be published in the Official Journal of the European Communities referencing the Directive 1999/5/EC 1 of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications
18、 terminal equipment and the mutual recognition of their conformity (“the R Road Transport and Traffic Telematics (RTTT); Dedicated Short Range Communication (DSRC) transmission equipment (500 kbit/s / 250 kbit/s) operating in the 5,8 GHz Industrial, Scientific and Medical (ISM) band, as identified b
19、elow: Part 1: “General characteristics and test methods for Road Side Units (RSU) and On-Board Units (OBU)“; Part 2: “Harmonized EN under article 3.2 of the R Sub-part 1: “Requirements for the Road Side Units (RSU)“; Sub-part 2: “Requirements for the On-Board Units (OBU)“; Technical specifications r
20、elevant to Directive 1999/5/EC 1 are given in annex A. National transposition dates Date of adoption of this EN: 2 April 2004 Date of latest announcement of this EN (doa): 31 July 2004 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 31 January 2005 Date of with
21、drawal of any conflicting National Standard (dow): 31 January 2006 ETSI ETSI EN 300 674-2-2 V1.1.1 (2004-08) 5 Introduction The present document is part of a set of standards designed to fit in a modular structure to cover all radio and telecommunications terminal equipment under the R it provides s
22、cope for standards to be added: - under article 3.2 when new frequency bands are agreed; or - under article 3.3 should the Commission take the necessary decisions without requiring alteration of standards that are already published; it clarifies, simplifies and promotes the usage of Harmonized Stand
23、ards as the relevant means of conformity assessment. ETSI ETSI EN 300 674-2-2 V1.1.1 (2004-08) 7 1 Scope The present document applies to Road Transport and Traffic Telematics (RTTT) systems - with a Radio Frequency (RF) output connection and specified antenna or with an integral antenna; - for data
24、transmission only; - operating on radio frequencies in the 5,725 GHz to 5,875 GHz Industrial, Scientific and Medical (ISM) frequency band. The applicability of the present document covers only the On Board Units (OBUs). The present document does not necessarily include all the characteristics which
25、may be required by a user, nor does it necessarily represent the optimum performance achievable. The present document complies with ECC/DEC/(02)01 5 and CEPT/ERC/REC 70-03 6. It is a specific standard covering various RTTT applications. The present document applies to the following radio equipment t
26、ypes operating in all or in part of the following service frequency bands given in table 1: Table 1: Frequency bands and centre frequencies fTxallocated for DSRC Pan European Service Frequencies National Service Frequencies Channel 1 5,795 GHz to 5,800 GHz, ftX= 5,7975 GHz Channel 2 5,800 GHz to 5,8
27、05 GHz, ftX= 5,8025 GHz Channel 3 5,805 GHz to 5,810 GHz, ftX= 5,8075 GHz Channel 4 5,810 GHz to 5,815 GHz, ftX= 5,8125 GHz The present document is intended to cover the provisions of Directive 1999/5/EC 1 (R Road Transport and Traffic Telematics (RTTT); Dedicated Short Range Communication (DSRC) tr
28、ansmission equipment (500 kbit/s / 250 kbit/s) operating in the 5,8 GHz Industrial, Scientific and Medical (ISM) band; Part 1: General characteristics and test methods for Road Side Units (RSU) and On-Board Units (OBU)“. 5 ECC/DEC/(02)01: “ECC Decision of 15 March 2002 on the frequency bands to be d
29、esignated for the co-ordinated introduction of Road Transport and Traffic Telematic Systems“. 6 CEPT/ERC/REC 70-03: “Relating to the use of Short Range Devices (SRD)“. 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given i
30、n the R - it shows the status of each EN-R, whether it is essential to implement in all circumstances (Mandatory), or whether the requirement is dependent on the provider having chosen to support a particular optional service or functionality (Optional). In particular it enables the EN-Rs associated
31、 with a particular optional service or functionality to be grouped and identified; - when completed in respect of particular equipment it provides a means to undertake the static assessment of conformity with the EN. Table A.1: EN Requirements Table (EN-RT) for OBUs EN Reference EN 300 674-2-2 Comme
32、nt No. Reference EN-R (see note 1) Status Transmitter 1 4.2.1.1 Maximum equivalent isotropically radiated power M (see note 2) 2 4.2.1.2 Frequency error M (see note 2) 3 4.2.1.3 Transmitter spectrum mask M (see note 2) 4 4.2.1.4 Unwanted emissions M (see note 2) Receiver 5 4.2.2 Receiver spurious em
33、issions M (see note 3) NOTE 1: These EN-Rs are justified under article 3.2 of the R Reference Clause reference number of conformance requirement within the present document; EN-R Title of conformance requirement within the present document; Status Status of the entry as follows: M Mandatory, shall b
34、e implemented under all circumstances; O Optional may be provided, but if provided shall be implemented in accordance with the requirements; O.n this status is used for mutually exclusive or selectable options among a set. The integer “n“ shall refer to a unique group of options within the EN-RT. A
35、footnote to the EN-RT shall explicitly state what the requirement is for each numbered group. For example, “It is mandatory to support at least one of these options“, or, “It is mandatory to support exactly one of these options“. Comments To be completed as required. ETSI ETSI EN 300 674-2-2 V1.1.1
36、(2004-08) 12Annex B (informative): Bibliography Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a procedure for the provision of information in the field of technical standards and regulations. ETSI EN 301 489: “Electromagnetic compatibility and Radio spe
37、ctrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services“. ETSI ETSI EN 300 674-2-2 V1.1.1 (2004-08) 13Annex C (informative): The EN title in the official languages Language EN title Czech Danish DutchEnglish Electromagnetic compatibility and Radio spectrum
38、Matters (ERM); Road Transport and Traffic Telematics (RTTT); Dedicated Short Range Communication (DSRC) transmission equipment (500 kbit/s / 250 kbit/s) operating in the 5,8 GHz Industrial, Scientific and Medical (ISM) band; Part 2: Harmonized EN under article 3.2 of the R Sub-part 2: Requirements f
39、or the On-Board Units (OBU) Estonian Finnish French German Greek Hungarian Icelandic Italian Latvian Lithuanian Maltese Polish Kompatybilno Elektromagnetyczna i Zagadnienia Widma Radiowego (ERM) - Transport drogowy i telematyka trafiku (RTTT) - Wydzielona czno maego zasigu (DSRC),urzdzenia transmisy
40、jne (500 kbit/s / 250 kbit/s) pracujce w pamie czstotliwoci 5,8 GHz wydzielonym do zastosowania przemysowego, naukowego i medycznego (ISM) - Cz 2-2: Zharmonizowana EN zapewniajca spenienie zasadniczych wymaga zgodnie z artykuem 3.2 dyrektywy R&TTE. Wymagania dotyczce zespow instalowanych na pojedzie
41、 (OBU). Portuguese Slovak Slovenian Spanish Swedish ETSI ETSI EN 300 674-2-2 V1.1.1 (2004-08) 14History Document history V1.1.1 February 1999 Publication as ES 200 674-2 V1.1.1 July 2003 Public Enquiry PE 20031121: 2003-07-23 to 2003-11-21 V1.1.1 February 2004 Vote V 20040402: 2004-02-02 to 2004-04-02 V1.1.1 August 2004 Publication
