ETSI EN 301 489-33-2017 ElectroMagnetic Compatibility (EMC) standard for radio equipment and services Part 33 Specific conditions for Ultra-WideBand (UWB) devices Harmonised Standa.pdf

上传人:appealoxygen216 文档编号:729693 上传时间:2019-01-08 格式:PDF 页数:25 大小:171.77KB
下载 相关 举报
ETSI EN 301 489-33-2017 ElectroMagnetic Compatibility (EMC) standard for radio equipment and services Part 33 Specific conditions for Ultra-WideBand (UWB) devices Harmonised Standa.pdf_第1页
第1页 / 共25页
ETSI EN 301 489-33-2017 ElectroMagnetic Compatibility (EMC) standard for radio equipment and services Part 33 Specific conditions for Ultra-WideBand (UWB) devices Harmonised Standa.pdf_第2页
第2页 / 共25页
ETSI EN 301 489-33-2017 ElectroMagnetic Compatibility (EMC) standard for radio equipment and services Part 33 Specific conditions for Ultra-WideBand (UWB) devices Harmonised Standa.pdf_第3页
第3页 / 共25页
ETSI EN 301 489-33-2017 ElectroMagnetic Compatibility (EMC) standard for radio equipment and services Part 33 Specific conditions for Ultra-WideBand (UWB) devices Harmonised Standa.pdf_第4页
第4页 / 共25页
ETSI EN 301 489-33-2017 ElectroMagnetic Compatibility (EMC) standard for radio equipment and services Part 33 Specific conditions for Ultra-WideBand (UWB) devices Harmonised Standa.pdf_第5页
第5页 / 共25页
点击查看更多>>
资源描述

1、 ETSI EN 301 489-33 V2.1.1 (2017-02) ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 33: Specific conditions for Ultra-WideBand (UWB) devices; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU HARMONISED EUROPEAN STA

2、NDARD ETSI ETSI EN 301 489-33 V2.1.1 (2017-02)2 Reference REN/ERM-EMC-343 Keywords EMC, harmonised standard, radio, UWB ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucrati

3、f enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the pres

4、ent document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network dr

5、ive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in t

6、he present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as a

7、uthorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM,

8、 PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Asso

9、ciation. ETSI ETSI EN 301 489-33 V2.1.1 (2017-02)3 Contents Intellectual Property Rights 5g3Foreword . 5g3Modal verbs terminology 5g31 Scope 6g32 References 6g32.1 Normative references . 6g32.2 Informative references 8g33 Definitions and abbreviations . 8g33.1 Definitions 8g33.2 Abbreviations . 8g34

10、 Test conditions . 8g34.1 General . 8g34.2 Arrangements for test signals . 8g34.2.1 General 8g34.2.2 Arrangements for test signals at the RF input of transmitters . 8g34.2.3 Arrangements for test signals at the RF output of transmitters . 9g34.2.4 Arrangements for test signals at the RF input of rec

11、eivers . 9g34.2.5 Arrangements for test signals at the RF output of receivers . 9g34.2.6 Arrangements for testing transmitter and receiver together (as a system) 9g34.3 Exclusion bands 9g34.3.1 for EMC emission test 9g34.3.2 for EMC immunity test . 9g34.4 Narrow band responses of receivers . 10g34.5

12、 Normal test modulation 10g35 Performance assessment . 10g35.1 General . 10g35.2 Equipment which can provide an UWB communications link . 10g35.3 Equipment which does not provide an UWB communications link . 10g35.4 Ancillary equipment . 10g35.5 Equipment classification 10g36 Performance criteria .

13、11g36.0 Introduction 11g36.1 Performance criteria for continuous phenomena applied to transmitters and receivers . 11g36.2 Performance criteria for transient phenomena applied to transmitters and receivers . 11g36.3 Performance criteria for equipment which does not provide an UWB communication link

14、11g36.4 Performance criteria for ancillary equipment tested on a stand alone basis . 12g37 Applicability overview . 12g37.1 Emission . 12g37.2 Immunity 12g38 Methods of measurement and limits for EMC emissions 12g38.1 Test configuration. 12g38.2 Enclosure port of ancillary equipment measured on a st

15、and alone basis 12g38.2.1 General 12g38.2.2 Test method 13g38.2.3 Limits 13g38.3 DC power input/output ports 13g38.3.1 General 13g38.3.2 Test method 13g38.3.3 Limits 13g38.4 AC mains power input/output ports . 14g38.4.1 General 14g38.4.2 Test method 14g3ETSI ETSI EN 301 489-33 V2.1.1 (2017-02)4 8.4.

16、3 Limits 14g38.4.3.1 General 14g38.4.3.2 AC Power port used for power supply only 14g38.4.3.3 AC power input port also used for PLC Communications 14g38.5 Harmonic current emissions (AC mains input port) . 15g38.6 Voltage fluctuations and flicker (AC mains input port) . 15g38.7 Wired network ports .

17、 15g38.7.1 General 15g38.7.2 Test method 15g38.7.3 Limits 15g39 Test methods and levels for immunity tests . 16g39.1 Test configuration. 16g39.2 Radio frequency electromagnetic field (80 MHz to 6 000 MHz) . 16g39.2.1 General 16g39.2.2 Test method 16g39.2.3 Performance criteria 16g39.3 Electrostatic

18、discharge 17g39.3.1 General 17g39.3.2 Test method 17g39.3.3 Performance criteria 17g39.4 Fast transients, common mode . 17g39.4.1 General 17g39.4.2 Test method 17g39.4.3 Performance criteria 18g39.5 Radio frequency, common mode 18g39.5.1 General 18g39.5.2 Test method 18g39.5.3 Performance criteria 1

19、8g39.6 Transients and surges in the vehicular environment . 18g39.6.1 General 18g39.6.2 Test method 19g39.6.3 Performance criteria 19g39.7 Voltage dips and interruptions 19g39.7.1 General 19g39.7.2 Test method 19g39.7.3 Performance criteria 19g39.8 Surges . 20g39.8.1 General 20g39.8.2 Test method 20

20、g39.8.2.0 General 20g39.8.2.1 Test method for wired network ports directly connected to outdoor cables 20g39.8.2.2 Test method for wired network ports connected to indoor cables . 20g39.8.2.3 Test method for mains ports 20g39.8.3 Performance criteria 21g3Annex A (informative): Relationship between t

21、he present document and the essential requirements of Directive 2014/53/EU . 22g3Annex B (informative): Change history . 24g3History 25g3ETSI ETSI EN 301 489-33 V2.1.1 (2017-02)5 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ET

22、SI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is availa

23、ble from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 00

24、0 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has

25、 been prepared under the Commissions standardisation request C(2015) 5376 final i.2 to provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipme

26、nt and repealing Directive 1999/5/EC i.1. Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present document, a presump

27、tion of conformity with the corresponding essential requirements of that Directive, and associated EFTA regulations. The present document is part 33 of a multi-part deliverable. Full details of the entire series can be found in part 1 1. National transposition dates Date of adoption of this EN: 27 J

28、anuary 2017 Date of latest announcement of this EN (doa): 30 April 2017 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 31 October 2017 Date of withdrawal of any conflicting National Standard (dow): 31 October 2018 Modal verbs terminology In the present documen

29、t “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except whe

30、n used in direct citation. ETSI ETSI EN 301 489-33 V2.1.1 (2017-02)6 1 Scope The present document, together with ETSI EN 301 489-1 1, specifies technical characteristics and methods of measurements for radio devices based on UWB technology in respect of ElectroMagnetic Compatibility (EMC). The prese

31、nt document applies to fixed, mobile or portable UWB devices, e.g.: stand alone radio equipment with or without its own control provisions; plug-in radio devices intended for use with, or within, a variety of host systems, e.g. personal computers, hand-held terminals, etc.; plug-in radio devices int

32、ended for use within combined equipment, e.g. cable modems, set-top boxes, access points, etc.; combined equipment or a combination of a plug-in radio device and a specific type of host equipment; equipment for use in road and rail vehicles; ground and wall probing radar equipment; (tank) level prob

33、ing radar equipment; material sensing devices. NOTE: If a system includes transponders, these are measured together with the transmitter and examples of Ultra-WideBand equipment are given in the related harmonised standards of article 3.2 of Directive 2014/53/EU i.1. Technical specifications related

34、 to the antenna port and emissions from the enclosure port of Ultra-WideBand (UWB) equipment are not included in the present document. Such technical specifications are found in the relevant product standards for the effective use of the radio spectrum. The present document specifies the applicable

35、test conditions, performance assessment and performance criteria for Ultra-WideBand (UWB) equipment and associated ancillary equipment. Examples of Ultra-WideBand equipment are given in the related harmonised standards. In case of differences (for instance concerning special conditions, definitions,

36、 abbreviations) between the present document and ETSI EN 301 489-1 1, the provisions of the present document take precedence. The environmental classification and the emission and immunity requirements used in the present document are as stated in ETSI EN 301 489-1 1, except for any special conditio

37、ns included in the present document. The present document covers the essential requirements of article 3.1b of Directive 2014/53/EU i.1 under the conditions identified in annex A. 2 References 2.1 Normative references References are specific, identified by date of publication and/or edition number o

38、r version number. Only the cited version applies. Referenced documents which are not found to be publicly available in the expected location might be found at https:/docbox.etsi.org/Reference/. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guar

39、antee their long term validity. The following referenced documents are necessary for the application of the present document. ETSI ETSI EN 301 489-33 V2.1.1 (2017-02)7 1 ETSI EN 301 489-1 (V2.1.1) (02-2017): “ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Comm

40、on technical requirements; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU and the essential requirements of article 6 of Directive 2014/30/EU“. 2 ETSI EN 302 065-1 (V2.1.1) (11-2016): “Short Range Devices (SRD) using Ultra Wide Band technology (UWB)

41、; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 1: Requirements for Generic UWB applications“. 3 ETSI EN 302 065-2 (V2.1.1) (11-2016): “Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonised Standard covering the essent

42、ial requirements of article 3.2 of the Directive 2014/53/EU; Part 2: Requirements for UWB location tracking“. 4 ETSI EN 302 065-3 (V2.1.1) (11-2016): “Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonised Standard covering the essential requirements of article 3.2 of the Direc

43、tive 2014/53/EU; Part 3: Requirements for UWB devices for ground based vehicular applications“. 5 ETSI EN 302 065-4 (V1.1.1) (11-2016): “Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/E

44、U; Part 4: Material Sensing devices using UWB technology below 10,6 GHz“. 6 ETSI EN 302 066 (V2.1.1) (01-2017): “Short Range Devices (SRD); Ground- and Wall- Probing Radar applications (GPR/WPR) imaging systems; Harmonised Standard covering the essential requirements of article 3.2 of the Directive

45、2014/53/EU“. 7 ETSI EN 302 372 (V2.1.1) (12-2016): “Short Range Devices (SRD); Tank Level Probing Radar (TLPR) equipment operating in the frequency ranges 4,5 GHz to 7 GHz, 8,5 GHz to 10,6 GHz, 24,05 GHz to 27 GHz, 57 GHz to 64 GHz, 75 GHz to 85 GHz; Harmonised Standard covering the essential requir

46、ements of article 3.2 of the Directive 2014/53/EU“. 8 ETSI EN 302 729 (V2.1.1) (12-2016): “Short Range Devices (SRD); Level Probing Radar (LPR) equipment operating in the frequency ranges 6 GHz to 8,5 GHz, 24,05 GHz to 26,5 GHz, 57 GHz to 64 GHz, 75 GHz to 85 GHz; Harmonised Standard covering the es

47、sential requirements of article 3.2 of the Directive 2014/53/EU“. 9 CENELEC EN 55032:2015: “Electromagnetic compatibility of multimedia equipment - Emission Requirements“. 10 CENELEC EN 61326-1:2013: “Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: Gener

48、al requirements“. 11 CENELEC EN 61326-2-3:2013: “Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning

49、“. 12 CENELEC EN 61326-2-5:2013: “Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with interfaces according to IEC 61748-1, CP 3/2“. 13 CENELEC EN 61000-6-2:2005: “Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments“. 14 CENELEC EN 61000-6-3:2007 “Electromagnetic compatibility (EMC) - Part 6-3: Generic sta

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 标准规范 > 国际标准 > 其他

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1