1、 ETSI EN 301 908-14 V11.1.1 (2016-05) IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 14: Evolved Universal Terrestrial Radio Access (E-UTRA) Base Stations (BS) HARMONISED EUROPEAN STANDARD ETSI ETSI EN 301 908-14 V11.1.
2、1 (2016-05) 2 Reference REN/MSG-TFES-11-14-RED Keywords 3G, 3GPP, cellular, digital, E-UTRA, IMT, IMT-2000, LTE, mobile, radio, regulation, UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C As
3、sociation but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or p
4、rint versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept
5、 on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.asp
6、x If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
7、and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All
8、 rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered
9、and owned by the GSM Association. ETSI ETSI EN 301 908-14 V11.1.1 (2016-05) 3 Contents Intellectual Property Rights 6g3Foreword . 6g3Modal verbs terminology 6g3Introduction 6g31 Scope 7g32 References 7g32.1 Normative references . 7g32.2 Informative references 8g33 Definitions, symbols and abbreviati
10、ons . 9g33.1 Definitions 9g33.2 Symbols 13g33.3 Abbreviations . 14g34 Technical requirements specifications . 15g34.1 Environmental profile . 15g34.2 Conformance requirements 16g34.2.1 Introduction. 16g34.2.2 Operating band unwanted emissions 19g34.2.2.1 Definition 19g34.2.2.2 Limits 20g34.2.2.2.0 G
11、eneral 20g34.2.2.2.1 Limits for Wide Area BS (Bands 1, 3, 8, 32, 33 and 34) . 21g34.2.2.2.2 Limits for Wide Area BS (Bands 7, 22, 38, 40, 42 and 43) . 23g34.2.2.2.3 Limits for Wide Area BS (Band 20 and 28) 26g34.2.2.2.4 Limits for Local Area BS 27g34.2.2.2.5 Limits for Home BS 28g34.2.2.2.6 Limits f
12、or protection of DTT . 30g34.2.2.2.7 Limits for protection of adjacent band services . 31g34.2.2.2.8 Limits for Medium Range BS . 31g34.2.2.2.9 Limits for operation in Band 32 35g34.2.2.3 Conformance . 36g34.2.3 Adjacent Channel Leakage Power Ratio (ACLR) 36g34.2.3.1 Definition 36g34.2.3.2 Void. 36g
13、34.2.3.3 Void. 36g34.2.3.4 Limits 37g34.2.3.4.1 ACLR Limits . 37g34.2.3.4.2 Cumulative ACLR test requirement in non-contiguous spectrum limits . 38g34.2.3.5 Conformance . 39g34.2.4 Transmitter spurious emissions . 39g34.2.4.1 Definition 39g34.2.4.2 Limits 40g34.2.4.2.1 Spurious emissions 40g34.2.4.2
14、.2 Co-existence with other systems . 40g34.2.4.2.3 Protection of the BS receiver of own or different BS 42g34.2.4.2.4 Co-existence with Home BS operating in other bands 42g34.2.4.3 Conformance . 43g34.2.5 Base Station maximum output power . 43g34.2.5.1 Definition 43g34.2.5.2 Limit 44g34.2.5.3 Confor
15、mance . 44g34.2.6 Transmitter intermodulation . 44g34.2.6.1 Definition 44g34.2.6.2 Limit 44g34.2.6.3 Conformance . 45g3ETSI ETSI EN 301 908-14 V11.1.1 (2016-05) 4 4.2.7 Receiver spurious emissions . 45g34.2.7.1 Definition 45g34.2.7.2 Limit 45g34.2.7.3 Conformance . 46g34.2.8 Blocking characteristics
16、 46g34.2.8.1 Definition 46g34.2.8.2 Limit 46g34.2.8.3 Conformance . 49g34.2.9 Receiver intermodulation characteristics 49g34.2.9.1 Definition 49g34.2.9.2 Limit 49g34.2.9.3 Conformance . 53g34.2.10 Adjacent Channel Selectivity (ACS) and narrow-band blocking . 53g34.2.10.1 Definition 53g34.2.10.2 Limi
17、t 53g34.2.10.3 Conformance . 56g34.2.11 Home BS output power for adjacent UTRA channel protection. 56g34.2.11.1 Definition 56g34.2.11.2 Limit 57g34.2.11.3 Conformance . 57g34.2.12 Home BS output power for adjacent E-UTRA channel protection . 57g34.2.12.1 Definition and applicability . 57g34.2.12.2 L
18、imit 58g34.2.12.3 Conformance . 58g34.2.13 Home BS output power for co-channel E-UTRA protection 59g34.2.13.1 Definition and applicability . 59g34.2.13.2 Limit 59g34.2.13.3 Conformance . 60g34.2.14 Reference sensitivity level 60g34.2.14.1 Definition and applicability . 60g34.2.14.2 Limits 60g34.2.14
19、.3 Conformance . 61g35 Testing for compliance with technical requirements 61g35.1 Environmental conditions for testing . 61g35.2 Interpretation of the measurement results 61g35.3 Essential radio test suites 63g35.3.0 Introduction. 63g35.3.1 Operating band unwanted emissions 63g35.3.1.0 General 63g35
20、.3.1.1 Initial conditions . 63g35.3.1.2 Procedure 64g35.3.1.3 Test requirement . 64g35.3.2 Adjacent Channel Leakage power Ratio (ACLR) 64g35.3.2.1 Initial conditions . 64g35.3.2.2 Procedure 65g35.3.2.3 Test requirement . 65g35.3.3 Transmitter spurious emissions . 65g35.3.3.0 General 65g35.3.3.1 Init
21、ial conditions . 65g35.3.3.2 Procedure 66g35.3.3.3 Test requirements 66g35.3.4 Base Station maximum output power . 66g35.3.4.0 General 66g35.3.4.1 Initial conditions . 66g35.3.4.2 Procedure 67g35.3.4.3 Test requirement . 67g35.3.5 Transmitter intermodulation . 67g35.3.5.0 General 67g35.3.5.1 Initial
22、 conditions . 67g35.3.5.2 Procedures . 67g35.3.5.3 Test requirement . 68g3ETSI ETSI EN 301 908-14 V11.1.1 (2016-05) 5 5.3.6 Receiver spurious emissions . 68g35.3.6.0 General 68g35.3.6.1 Initial conditions . 68g35.3.6.2 Procedure 69g35.3.6.3 Test requirement . 69g35.3.7 Blocking characteristics 69g35
23、.3.7.0 General 69g35.3.7.1 Initial conditions . 69g35.3.7.2 Procedure 70g35.3.7.3 Test requirement . 70g35.3.8 Receiver intermodulation characteristics 70g35.3.8.0 General 70g35.3.8.1 Initial conditions . 70g35.3.8.2 Procedures . 71g35.3.8.3 Test requirement . 71g35.3.9 Adjacent Channel Selectivity
24、(ACS) and narrow-band blocking . 71g35.3.9.0 General 71g35.3.9.1 Initial conditions . 71g35.3.9.2 Procedure for Adjacent Channel Selectivity . 72g35.3.9.3 Procedure for narrow-band blocking . 72g35.3.9.4 Test requirement . 72g35.3.10 Home BS output power for adjacent UTRA channel protection. 73g35.3
25、.10.1 Initial conditions . 73g35.3.10.2 Procedure 73g35.3.10.3 Test requirement . 73g35.3.11 Home BS output power for adjacent E-UTRA channel protection . 73g35.3.11.1 Initial conditions . 73g35.3.11.2 Procedure 74g35.3.11.3 Test requirement . 74g35.3.12 Home BS output power for co-channel E-UTRA pr
26、otection 74g35.3.12.1 Initial conditions . 74g35.3.12.2 Procedure 75g35.3.12.3 Test requirement . 75g35.3.13 Reference sensitivity level 76g35.3.13.0 General 76g35.3.13.1 Initial conditions . 76g35.3.13.2 Procedure 76g35.3.13.3 Test requirement . 76g3Annex A (normative): Relationship between the pre
27、sent document and the essential requirements of Directive 2014/53/EU . 77g3Annex B (normative): Base Station configurations . 79g3B.1 Reception with multiple receiver antenna connectors, receiver diversity 79g3B.2 Duplexers . 79g3B.3 Power supply options . 79g3B.4 Ancillary RF amplifiers 80g3B.5 BS
28、using antenna arrays . 80g3B.5.1 Receiver tests 81g3B.5.2 Transmitter tests . 81g3B.6 Transmission with multiple transmitter antenna connectors 81g3B.7 BS with integrated Iuant BS modem 82g3Annex C (informative): Environmental profile specification . 83g3Annex D (informative): Bibliography . 84g3His
29、tory 85g3ETSI ETSI EN 301 908-14 V11.1.1 (2016-05) 6 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and ca
30、n be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETS
31、I IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword
32、 This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Mobile Standards Group (MSG). For non EU countries the present document may be used for regulatory (Type Approval) purposes. The present document has been prepared under the Commissions standardisation request C(20
33、15) 5376 final i.1 to provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC i.2. Once the present docume
34、nt is cited in the Official Journal of the European Union under that Directive, compliance with the normative clauses of the present document given in table A-1 confers, within the limits of the scope of the present document, a presumption of conformity with the corresponding essential requirements
35、of that Directive, and associated EFTA regulations. The present document is part 14 of a multi-part deliverable. Full details of the entire series can be found in part 1 i.7. National transposition dates Date of adoption of this EN: 20 April 2016 Date of latest announcement of this EN (doa): 31 July
36、 2016 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 31 January 2017 Date of withdrawal of any conflicting National Standard (dow): 31 January 2018 Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“,
37、 “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. Introduction The present document is pa
38、rt of a set of standards developed by ETSI that are designed to fit in a modular structure to cover radio equipment within the scope of the Radio Equipment Directive i.2. The present document is produced following the guidance in ETSI EG 203 336 i.3 as applicable. ETSI ETSI EN 301 908-14 V11.1.1 (20
39、16-05) 7 1 Scope The present document applies to the following radio equipment types: 1) Base Station for Evolved Universal Terrestrial Radio Access (E-UTRA). This radio equipment type is capable of operating in all or any part of the operating bands given in table 1-1. Table 1-1: E-UTRA Base Statio
40、n operating bands E-UTRA band Direction of transmission E-UTRA Base Station operating bands 1 Transmit 2 110 MHz to 2 170 MHz Receive 1 920 MHz to 1 980 MHz 3 Transmit 1 805 MHz to 1 880 MHz Receive 1 710 MHz to 1 785 MHz 7 Transmit 2 620 MHz to 2 690 MHz Receive 2 500 MHz to 2 570 MHz 8 Transmit 92
41、5 MHz to 960 MHz Receive 880 MHz to 915 MHz 20 Transmit 791 MHz to 821 MHz Receive 832 MHz to 862 MHz 22 Transmit 3 510 MHz to 3 590 MHz Receive 3 410 MHz to 3 490 MHz 28 Transmit 758 MHz to 803 MHz Receive 703 MHz to 748 MHz 32 (note) Transmit 1 452 MHz to 1 496 MHz Receive N/A 33 Transmit and Rece
42、ive 1 900 MHz to 1 920 MHz 34 Transmit and Receive 2 010 MHz to 2 025 MHz 38 Transmit and Receive 2 570 MHz to 2 620 MHz 40 Transmit and Receive 2 300 MHz to 2 400 MHz 42 Transmit and Receive 3 400 MHz to 3 600 MHz 43 Transmit and Receive 3 600 MHz to 3 800 MHz NOTE: Restricted to E-UTRA operation w
43、hen carrier aggregation is configured. The downlink operating band is paired with the uplink operating band (external) of the carrier aggregation configuration that is supporting the configured Pcell. The present document covers requirements for E-UTRA Base Stations for 3GPP Release 8, 9, 10 and 11.
44、 This includes the requirements for E-UTRA Base Station operating bands and E-UTRA CA operating bands from 3GPP Release 12. The present document contains requirements to demonstrate that Radio equipment both effectively uses and supports the efficient use of radio spectrum in order to avoid harmful
45、interference. 2 References 2.1 Normative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced d
46、ocument (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee th
47、eir long term validity. The following referenced documents are necessary for the application of the present document. ETSI ETSI EN 301 908-14 V11.1.1 (2016-05) 8 1 ETSI TS 136 141 (V11.14.0) (01-2016): “LTE; Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (BS) conformance testing (
48、3GPP TS 36.141 version 11.14.0 Release 11)“. 2 ETSI TS 125 104 (V11.12.0) (01-2016): “Universal Mobile Telecommunications System (UMTS); Base Station (BS) radio transmission and reception (FDD) (3GPP TS 25.104 version 11.12.0 Release 11)“. 3 ETSI TS 125 105 (V11.9.0) (01-2016): “Universal Mobile Tel
49、ecommunications System (UMTS); Base Station (BS) radio transmission and reception (TDD) (3GPP TS 25.105 version 11.9.0 Release 11)“. 4 ETSI TS 136 104 (V11.14.0) (01-2016): “LTE; Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (BS) radio transmission and reception (3GPP TS 36.104 version 11.14.0 Release 11)“. 5 ETSI TS 125 141 (V11.12.0) (01-2016): “Universal Mobile Telecommunications System (UMTS); Base Station (BS) conformance testing (FDD) (3GPP TS 25.141 version 11.12.0 Release 11)“. 6 ETSI TS 136 211 (V11.6.0) (10-2014): “LTE; Evo
