1、 ETSI EN 301 908-14 V11.1.2 (2017-04) IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 14: Evolved Universal Terrestrial Radio Access (E-UTRA) Base Stations (BS) HARMONISED EUROPEAN STANDARD ETSI ETSI EN 301 908-14 V11.1.2 (2
2、017-04) 2 Reference REN/MSG-TFES-11-14-RED-C1 Keywords 3G, 3GPP, cellular, digital, E-UTRA, IMT, IMT-2000, LTE, mobile, radio, regulation, UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Ass
3、ociation but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or pr
4、int versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept
5、on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx
6、 If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying a
7、nd microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All
8、rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered a
9、nd owned by the GSM Association. ETSI ETSI EN 301 908-14 V11.1.2 (2017-04) 3 Contents Intellectual Property Rights 7g3Foreword . 7g3Modal verbs terminology 7g3Introduction 7g31 Scope 8g32 References 8g32.1 Normative references . 8g32.2 Informative references 9g33 Definitions, symbols and abbreviatio
10、ns . 10g33.1 Definitions 10g33.2 Symbols 15g33.3 Abbreviations . 16g34 Technical requirements specifications . 17g34.1 Environmental profile . 17g34.2 Conformance requirements 17g34.2.1 Introduction. 17g34.2.2 Operating band unwanted emissions 21g34.2.2.1 Definition 21g34.2.2.2 Limits 22g34.2.2.2.0
11、General 22g34.2.2.2.1 Limits for Wide Area BS (Bands 1, 3, 8, 32, 33 and 34) . 23g34.2.2.2.2 Limits for Wide Area BS (Bands 7, 22, 38, 40, 42 and 43) . 25g34.2.2.2.3 Limits for Wide Area BS (Band 20 and 28) 28g34.2.2.2.4 Limits for Local Area BS 29g34.2.2.2.5 Limits for Home BS 31g34.2.2.2.6 Limits
12、for protection of DTT . 32g34.2.2.2.7 Limits for protection of adjacent band services . 33g34.2.2.2.8 Limits for Medium Range BS . 33g34.2.2.2.9 Limits for operation in Band 32 37g34.2.2.3 Conformance . 38g34.2.3 Adjacent Channel Leakage Power Ratio (ACLR) 38g34.2.3.1 Definition 38g34.2.3.2 Void. 39
13、g34.2.3.3 Void. 39g34.2.3.4 Limits 39g34.2.3.4.1 ACLR Limits . 39g34.2.3.4.2 Cumulative ACLR test requirement in non-contiguous spectrum limits . 40g34.2.3.5 Conformance . 41g34.2.4 Transmitter spurious emissions . 42g34.2.4.1 Definition 42g34.2.4.2 Limits 42g34.2.4.2.1 Spurious emissions 42g34.2.4.
14、2.2 Co-existence with other systems . 42g34.2.4.2.3 Protection of the BS receiver of own or different BS 44g34.2.4.2.4 Co-existence with Home BS operating in other bands 44g34.2.4.3 Conformance . 45g34.2.5 Base Station maximum output power . 45g34.2.5.1 Definition 45g34.2.5.2 Limit 46g34.2.5.3 Confo
15、rmance . 46g34.2.6 Transmitter intermodulation . 46g34.2.6.1 Definition 46g34.2.6.2 Limit 46g34.2.6.3 Conformance . 47g3ETSI ETSI EN 301 908-14 V11.1.2 (2017-04) 4 4.2.7 Receiver spurious emissions . 47g34.2.7.1 Definition 47g34.2.7.2 Limit 47g34.2.7.3 Conformance . 48g34.2.8 Blocking characteristic
16、s 48g34.2.8.1 Definition 48g34.2.8.2 Limit 48g34.2.8.3 Conformance . 51g34.2.9 Receiver intermodulation characteristics 51g34.2.9.1 Definition 51g34.2.9.2 Limit 51g34.2.9.3 Conformance . 55g34.2.10 Adjacent Channel Selectivity (ACS) and narrow-band blocking . 55g34.2.10.1 Definition 55g34.2.10.2 Lim
17、it 55g34.2.10.3 Conformance . 59g34.2.11 Home BS output power for adjacent UTRA channel protection. 59g34.2.11.1 Definition 59g34.2.11.2 Limit 59g34.2.11.3 Conformance . 60g34.2.12 Home BS output power for adjacent E-UTRA channel protection . 60g34.2.12.1 Definition and applicability . 60g34.2.12.2
18、Limit 60g34.2.12.3 Conformance . 61g34.2.13 Home BS output power for co-channel E-UTRA protection 61g34.2.13.1 Definition and applicability . 61g34.2.13.2 Limit 62g34.2.13.3 Conformance . 63g34.2.14 Reference sensitivity level 63g34.2.14.1 Definition and applicability . 63g34.2.14.2 Limits 63g34.2.1
19、4.3 Conformance . 64g35 Testing for compliance with technical requirements 64g35.1 Environmental conditions for testing . 64g35.2 Interpretation of the measurement results 65g35.3 Essential radio test suites 66g35.3.0 Introduction. 66g35.3.1 Operating band unwanted emissions 66g35.3.1.0 General 66g3
20、5.3.1.1 Initial conditions . 66g35.3.1.2 Procedure 67g35.3.1.3 Test requirement . 67g35.3.2 Adjacent Channel Leakage power Ratio (ACLR) 67g35.3.2.1 Initial conditions . 67g35.3.2.2 Procedure 68g35.3.2.3 Test requirement . 68g35.3.3 Transmitter spurious emissions . 68g35.3.3.0 General 68g35.3.3.1 Ini
21、tial conditions . 68g35.3.3.2 Procedure 69g35.3.3.3 Test requirements 69g35.3.4 Base Station maximum output power . 69g35.3.4.0 General 69g35.3.4.1 Initial conditions . 69g35.3.4.2 Procedure 70g35.3.4.3 Test requirement . 70g35.3.5 Transmitter intermodulation . 70g35.3.5.0 General 70g35.3.5.1 Initia
22、l conditions . 70g35.3.5.2 Procedures . 70g35.3.5.3 Test requirement . 71g3ETSI ETSI EN 301 908-14 V11.1.2 (2017-04) 5 5.3.6 Receiver spurious emissions . 71g35.3.6.0 General 71g35.3.6.1 Initial conditions . 71g35.3.6.2 Procedure 72g35.3.6.3 Test requirement . 72g35.3.7 Blocking characteristics 72g3
23、5.3.7.0 General 72g35.3.7.1 Initial conditions . 72g35.3.7.2 Procedure 73g35.3.7.3 Test requirement . 73g35.3.8 Receiver intermodulation characteristics 74g35.3.8.0 General 74g35.3.8.1 Initial conditions . 74g35.3.8.2 Procedures . 74g35.3.8.3 Test requirement . 74g35.3.9 Adjacent Channel Selectivity
24、 (ACS) and narrow-band blocking . 75g35.3.9.0 General 75g35.3.9.1 Initial conditions . 75g35.3.9.2 Procedure for Adjacent Channel Selectivity . 75g35.3.9.3 Procedure for narrow-band blocking . 75g35.3.9.4 Test requirement . 76g35.3.10 Home BS output power for adjacent UTRA channel protection. 76g35.
25、3.10.1 Initial conditions . 76g35.3.10.2 Procedure 76g35.3.10.3 Test requirement . 77g35.3.11 Home BS output power for adjacent E-UTRA channel protection . 77g35.3.11.1 Initial conditions . 77g35.3.11.2 Procedure 77g35.3.11.3 Test requirement . 78g35.3.12 Home BS output power for co-channel E-UTRA p
26、rotection 78g35.3.12.1 Initial conditions . 78g35.3.12.2 Procedure 78g35.3.12.3 Test requirement . 79g35.3.13 Reference sensitivity level 79g35.3.13.0 General 79g35.3.13.1 Initial conditions . 79g35.3.13.2 Procedure 79g35.3.13.3 Test requirement . 80g3Annex A (informative): Relationship between the
27、present document and the essential requirements of Directive 2014/53/EU . 81g3Annex B (normative): Base Station configurations . 83g3B.1 Reception with multiple receiver antenna connectors, receiver diversity 83g3B.2 Duplexers . 83g3B.3 Power supply options . 83g3B.4 Ancillary RF amplifiers 84g3B.5
28、BS using antenna arrays . 84g3B.5.0 General . 84g3B.5.1 Receiver tests 85g3B.5.2 Transmitter tests . 85g3B.6 Transmission with multiple transmitter antenna connectors 86g3B.7 BS with integrated Iuant BS modem 86g3Annex C (informative): Environmental profile specification . 87g3Annex D (informative):
29、 Bibliography . 88g3ETSI ETSI EN 301 908-14 V11.1.2 (2017-04) 6 Annex E (informative): Change history . 89g3History 90g3ETSI ETSI EN 301 908-14 V11.1.2 (2017-04) 7 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The informa
30、tion pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ET
31、SI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the u
32、pdates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Mobile Standards Group (MSG). For non EU countries the present document may be used for regulatory (Typ
33、e Approval) purposes. The present document has been prepared under the Commissions standardisation request C(2015) 5376 final i.1 to provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation of the laws of the Member States relating to the m
34、aking available on the market of radio equipment and repealing Directive 1999/5/EC i.2. Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with the normative clauses of the present document given in table A-1 confers, within the limits o
35、f the scope of the present document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated EFTA regulations. The present document is part 14 of a multi-part deliverable. Full details of the entire series can be found in part 1 i.7. National trans
36、position dates Date of latest announcement of this EN (doa): 31 July 2017 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 31 January 2017 Date of withdrawal of any conflicting National Standard (dow): 31 January 2018 Modal verbs terminology In the present docum
37、ent “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except w
38、hen used in direct citation. Introduction The present document is part of a set of standards developed by ETSI that are designed to fit in a modular structure to cover radio equipment within the scope of the Radio Equipment Directive i.2. The present document is produced following the guidance in ET
39、SI EG 203 336 i.3 as applicable. ETSI ETSI EN 301 908-14 V11.1.2 (2017-04) 8 1 Scope The present document applies to the following radio equipment types: 1) Base Station for Evolved Universal Terrestrial Radio Access (E-UTRA). This radio equipment type is capable of operating in all or any part of t
40、he operating bands given in table 1-1. Table 1-1: E-UTRA Base Station operating bands E-UTRA band Direction of transmission E-UTRA Base Station operating bands 1 Transmit 2 110 MHz to 2 170 MHz Receive 1 920 MHz to 1 980 MHz 3 Transmit 1 805 MHz to 1 880 MHz Receive 1 710 MHz to 1 785 MHz 7 Transmit
41、 2 620 MHz to 2 690 MHz Receive 2 500 MHz to 2 570 MHz 8 Transmit 925 MHz to 960 MHz Receive 880 MHz to 915 MHz 20 Transmit 791 MHz to 821 MHz Receive 832 MHz to 862 MHz 22 Transmit 3 510 MHz to 3 590 MHz Receive 3 410 MHz to 3 490 MHz 28 Transmit 758 MHz to 803 MHz Receive 703 MHz to 748 MHz 32 (no
42、te 1) (note 2) Transmit 1 452 MHz to 1 496 MHz Receive N/A 33 Transmit and Receive 1 900 MHz to 1 920 MHz 34 Transmit and Receive 2 010 MHz to 2 025 MHz 38 Transmit and Receive 2 570 MHz to 2 620 MHz 40 Transmit and Receive 2 300 MHz to 2 400 MHz 42 Transmit and Receive 3 400 MHz to 3 600 MHz 43 Tra
43、nsmit and Receive 3 600 MHz to 3 800 MHz NOTE 1: Restricted to E-UTRA operation when carrier aggregation is configured. The downlink operating band is paired with the uplink operating band (external) of the carrier aggregation configuration that is supporting the configured Pcell. NOTE 2: Radio equi
44、pment in band 32 is only allowed to operate between 1 452 MHz and 1 492 MHz. The present document covers requirements for E-UTRA Base Stations for 3GPP Release 8, 9, 10 and 11. This includes the requirements for E-UTRA Base Station operating bands and E-UTRA CA operating bands from 3GPP Release 12.
45、The present document covers the essential requirements of article 3.2 of Directive 2014/53/EU i.2 under the conditions identified in annex A. 2 References 2.1 Normative references References are specific, identified by date of publication and/or edition number or version number. Only the cited versi
46、on applies. Referenced documents which are not found to be publicly available in the expected location might be found at https:/docbox.etsi.org/Reference/. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The fo
47、llowing referenced documents are necessary for the application of the present document. ETSI ETSI EN 301 908-14 V11.1.2 (2017-04) 9 1 ETSI TS 136 141 (V11.14.0) (01-2016): “LTE; Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (BS) conformance testing (3GPP TS 36.141 version 11.14.0
48、 Release 11)“. 2 ETSI TS 125 104 (V11.12.0) (01-2016): “Universal Mobile Telecommunications System (UMTS); Base Station (BS) radio transmission and reception (FDD) (3GPP TS 25.104 version 11.12.0 Release 11)“. 3 ETSI TS 125 105 (V11.9.0) (01-2016): “Universal Mobile Telecommunications System (UMTS);
49、 Base Station (BS) radio transmission and reception (TDD) (3GPP TS 25.105 version 11.9.0 Release 11)“. 4 ETSI TS 136 104 (V11.14.0) (01-2016): “LTE; Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (BS) radio transmission and reception (3GPP TS 36.104 version 11.14.0 Release 11)“. 5 ETSI TS 125 141 (V11.12.0) (01-2016): “Universal Mobile Telecommunications System (UMTS); Base Station (BS) conformance testing (FDD) (3GPP TS 25.141 version 11.12.0 Release 11)“. 6 ETSI TS 136 211 (V11.6.0) (10-2014): “LTE; Evolved Universal Terrestrial R
