1、 ETSI EN 302 065-5 V1.1.1 (2017-09) Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 5: Devices using UWB technology onboard aircraft HARMONISED EUROPEAN STANDARD ETSI ETSI EN 302 06
2、5-5 V1.1.1 (2017-09) 2Reference DEN/ERM-TGUWB-142 Keywords harmonised standard, radio, SRD, testing, UWB ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la
3、 Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document sh
4、all not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI
5、 Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present docu
6、ment, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by wr
7、itten permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ET
8、SI registered for the benefit of its Members. 3GPPTM and LTE are trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSM and the GSM logo are trademarks registered and owned by the GSM Associat
9、ion. ETSI ETSI EN 302 065-5 V1.1.1 (2017-09) 3Contents Intellectual Property Rights 6g3Foreword . 6g3Modal verbs terminology 6g31 Scope 7g32 References 7g32.1 Normative references . 7g32.2 Informative references 7g33 Definitions, symbols and abbreviations . 8g33.1 Definitions 8g33.2 Symbols 8g33.3 A
10、bbreviations . 8g34 Technical requirements specifications . 9g34.1 Environmental conditions . 9g34.2 General . 9g34.3 Transmitter Conformance Requirements 10g34.3.1 Operating Bandwidth 10g34.3.1.1 Applicability 10g34.3.1.2 Description 10g34.3.1.3 Limits 10g34.3.1.4 Conformance . 10g34.3.2 Maximum Va
11、lue of Mean Power Spectral Density 11g34.3.2.1 Applicability 11g34.3.2.2 Description 11g34.3.2.3 Limits 11g34.3.2.4 Conformance . 11g34.3.3 Maximum Value of Peak Power . 12g34.3.3.1 Applicability 12g34.3.3.2 Description 12g34.3.3.3 Limits 12g34.3.3.4 Conformance . 12g34.3.4 Exterior Limits 12g34.3.5
12、 Total Power. 12g34.3.6 Other Emissions 12g34.3.6.1 Applicability 12g34.3.6.2 Description 13g34.3.6.3 Limits 13g34.3.6.4 Conformance . 13g34.3.7 Transmitter Unwanted Emissions . 13g34.4 Receiver Conformance Requirements 13g34.4.1 General 13g34.4.2 Receiver spurious emissions . 13g34.4.2.1 Applicabil
13、ity 13g34.4.2.2 Description 13g34.4.2.3 Limits 13g34.4.2.4 Conformance . 14g34.4.3 Receiver interference handling . 14g34.4.3.1 Applicability 14g34.4.3.2 Description 14g34.4.3.3 Limits 14g34.4.3.4 Conformance . 14g34.5 Requirements for Spectrum Access 14g34.6 Antenna Requirements . 15g34.7 Other Req
14、uirements and Mitigation techniques . 15g34.7.1 Adaptive/Transmit Power Control (TPC) . 15g3ETSI ETSI EN 302 065-5 V1.1.1 (2017-09) 44.7.1.1 Applicability 15g34.7.1.2 Description 15g34.7.1.3 Limits 15g34.7.1.4 Conformance . 15g34.7.2 Activity Factor 15g34.7.3 Frequency Domain Mitigation 15g34.7.4 Sh
15、ielding Effects . 15g34.7.5 Thermal Radiation 15g34.7.6 Site Registration 16g35 Testing for compliance with technical requirements 16g35.1 Environmental conditions for testing . 16g35.2 General conditions for testing 16g35.2.1 Product information 16g35.2.2 Requirements for the test modulation . 16g3
16、5.2.3 Test conditions, power supply and ambient temperatures 16g35.2.4 Choice of equipment for test suites . 16g35.2.5 Multiple Operating bandwidths and multiband equipment . 16g35.2.6 Testing of host connected equipment and plug-in radio devices 16g35.3 Interpretation of the measurement results 17g
17、35.3.1 General 17g35.3.2 Measurement uncertainty is equal to or lower than maximum acceptable uncertainty . 17g35.3.3 Measurement uncertainty is greater than maximum acceptable uncertainty . 17g35.3.4 Emissions 17g36 Conformance test suits . 17g36.1 Introduction 17g36.2 Initial Measurement steps . 1
18、7g36.3 Radiated measurements 17g36.3.1 General 17g36.3.2 Test sites and general arrangements for measurements involving the use of radiated fields 17g36.3.3 Guidance on the use of a radiation test site . 17g36.3.3.1 General 17g36.3.3.2 Range length . 18g36.3.4 Coupling of signals . 18g36.3.5 Standar
19、d test methods . 18g36.3.5.1 Generic measurement method . 18g36.3.5.1.1 Calibrated setup . 18g36.3.5.1.2 Substitution method. 18g36.3.6 Standard calibration method . 18g36.4 Conducted measurements . 18g36.4.1 General Setup 18g36.4.2 Specific Setup . 18g36.5 Conformance methods of measurement for tra
20、nsmitter . 18g36.5.1 General 18g36.5.2 Method of measurements of the Ultra Wideband Emissions 18g36.5.3 Operating Bandwidth 19g36.5.4 Mean power spectral density measurements . 19g36.5.5 Peak power measurements 19g36.5.6 Exterior limit measurement. 19g36.5.7 Total Power . 19g36.5.8 Transmitter unwan
21、ted emissions . 19g36.6 Conformance methods of measurement for receiver 19g36.6.1 Receiver spurious emissions . 19g36.6.2 Receiver interference handling . 19g36.7 Conformance test suites for spectrum access . 19g36.8 Conformance test suites for antenna requirements . 20g36.9 Other Test Suites 20g36.
22、9.1 Transmit Power Control 20g36.9.2 Activity Factor 20g36.9.3 Frequency Domain Mitigation 20g36.9.4 Shielding Effects . 20g3ETSI ETSI EN 302 065-5 V1.1.1 (2017-09) 56.9.5 Thermal Radiations . 20g36.9.6 Installation requirements/site registration . 20g3Annex A (informative): Relationship between the
23、 present document and the essential requirements of Directive 2014/53/EU . 21g3Annex B (informative): Application form for testing 22g3B.1 Introduction 22g3B.2 Product Information for ETSI EN 302 065-5, clause 5.2.1 22g3B.2.1 Type of Equipment (stand-alone, combined, plug-in radio device, etc.) 22g3
24、B.2.2 The nominal voltages of the stand-alone radio equipment or the nominal voltages of the combined (host) equipment or test jig in case of plug-in devices . 22g3B.3 Signal related Information for ETSI EN 302 065-5, clause 4.3 . 23g3B.3.1 Introduction 23g3B.3.2 Operating bandwidth(s) of the equipm
25、ent 23g3B.3.3 The worst case mode for each of the following tests 23g3B.4 RX test Information for ETSI EN 302 065-5, clause 4.4 . 23g3B.4.1 Introduction 23g3B.4.2 Performance criterion and level of performance 23g3B.4.3 Interfering signals . 23g3B.5 Information on mitigation techniques as required b
26、y ETSI EN 302 065-5, clause 4.7 24g3B.5.1 Mitigation techniques . 24g3B.6 Additional information provided by the applicant . 24g3B.6.1 About the DUT . 24g3B.6.2 Additional items and/or supporting equipment provided . 24g3Annex C (normative): Procedure for measurement of the porthole attenuation . 26
27、g3Annex D (informative): Measurement antenna, preamplifier, and cable specifications 28g3History 29g3ETSI ETSI EN 302 065-5 V1.1.1 (2017-09) 6Intellectual Property Rights Essential patents IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
28、 pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI S
29、ecretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updat
30、es on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as be
31、ing the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Harmonised European
32、 Standard (EN) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been prepared under the Commissions standardisation request C(2015) 5376 final i.5 to provide one voluntary means of conforming to the essential requi
33、rements of Directive 2014/53/EU on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC i.1. Once the present document is cited in the Official Journal of the European Union under that Directive, compli
34、ance with the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated EFTA regulations. The present document is part 5 of
35、a multi-part deliverable. Full details of the entire series can be found in part 1 i.6. National transposition dates Date of adoption of this EN: 20 June 2017 Date of latest announcement of this EN (doa): 30 September 2017 Date of latest publication of new National Standard or endorsement of this EN
36、 (dop/e): 31 March 2018 Date of withdrawal of any conflicting National Standard (dow): 31 March 2019 Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.
37、2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI EN 302 065-5 V1.1.1 (2017-09) 71 Scope The present document applies to transceivers, transmitters and receivers util
38、izing Ultra WideBand (UWB) technologies and used onboard aircraft, i.e. radio links for intra-aircraft communications purposes inside an aircraft. The present document applies to impulse, modified impulse and RF carrier based UWB communication technologies. The present document applies to UWB equipm
39、ent with an output connection used with a dedicated antenna or UWB equipment with an integral antenna. Equipment covered by the present document operates in accordance with CEPT ECC/DEC(12)03 i.2 “The harmonised conditions for UWB applications onboard aircraft“. These radio equipment types are capab
40、le of operating in all or part of the frequency bands given in table 1. Table 1: Permitted ranges of operation in accordance with CEPT ECC/DEC(12)03 i.2 Permitted range of operation (see note 1) Transmit 30 MHz to 10,6 GHz Receive 30 MHz to 10,6 GHz Intended ranges of operation (preferred range of o
41、perating bandwidth), see note 2 Transmit 6,0 GHz to 6,650 GHz Receive 6,0 GHz to 6,650 GHz Transmit 6,6752 GHz to 8,5 GHz Receive 6,6752 GHz to 8,5 GHz NOTE 1: Limits in table 2 clause 4.3.2 and table 3 clause 4.3.3 are to be met. NOTE 2: This is the preferred range for the operating bandwidth, as d
42、efined in clause 4.3.1. 2 References 2.1 Normative references References are specific, identified by date of publication and/or edition number or version number. Only the cited version applies. Referenced documents which are not found to be publicly available in the expected location might be found
43、at https:/docbox.etsi.org/Reference/. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are necessary for the application of the present document. 1 ETSI EN 303 883 (V1.1.1) (09
44、-2016): “Short Range Devices (SRD) using Ultra Wide Band (UWB); Measurement Techniques“. 2 ETSI TS 103 361 (V1.1.1) (03-2016): “Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Receiver technical requirements, parameters and measurement procedures to fulfil the requirements of the D
45、irective 2014/53/EU“. 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced docu
46、ment (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. ETSI ETSI EN 302 065-5 V1.1.1 (2017-09) 8The following referenced documents are not necessary for the application of the
47、present document but they assist the user with regard to a particular subject area. i.1 Directive 2014/53/EU of the European Parliament and of the council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repe
48、aling directive 1999/5/EC. i.2 CEPT ECC/DEC(12)03 of 2 November 2012: “The harmonised conditions for UWB applications onboard aircraft“. i.3 Commission Decision 2014/702/EU of 7 October 2014 amending Decision 2007/131/EC on allowing the use of the radio spectrum for equipment using ultra-wideband te
49、chnology in a harmonised manner in the Community (notified under document C(2014) 7083). i.4 CEPT/ERC Recommendation 74-01: “Unwanted emissions in the spurious domain“. i.5 Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request to the European Committee for Electrotechnical Standardisation and to the European Telecommunications Standards Institute as regards radio equipment in support of Directive 2014/53/EU of the European Parliament and of the Council. i.6 ETSI EN 302 065-1 (V2.1.1): “Short Range Devices (SRD)
