1、 ETSI EN 302 502 V2.1.1 (2017-03) Wireless Access Systems (WAS); 5,8 GHz fixed broadband data transmitting systems; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU HARMONISED EUROPEAN STANDARD ETSI ETSI EN 302 502 V2.1.1 (2017-03) 2 Reference REN/BRAN-0
2、060021 Keywords access, broadband, digital, fixed networks, harmonised standard, multipoint ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfectu
3、re de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be mo
4、dified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
5、 Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please
6、send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permiss
7、ion of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the
8、ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI EN 302 50
9、2 V2.1.1 (2017-03) 3 Contents Intellectual Property Rights 6g3Foreword . 6g3Modal verbs terminology 6g3Introduction 6g31 Scope 7g32 References 7g32.1 Normative references . 7g32.2 Informative references 7g33 Definitions, symbols and abbreviations . 8g33.1 Definitions 8g33.2 Symbols 9g33.3 Abbreviati
10、ons . 9g34 Technical requirements specification . 10g34.1 Environmental profile . 10g34.2 Conformance requirements 10g34.2.1 Designation of centre frequencies and frequency error 10g34.2.1.1 Definition 10g34.2.1.2 Limits 10g34.2.1.3 Conformance . 10g34.2.2 Transmitter RF output power, EIRP and EIRP
11、spectral density . 10g34.2.2.1 Definition 10g34.2.2.2 Limits 11g34.2.2.3 Conformance . 11g34.2.3 Transmitter unwanted emissions . 11g34.2.3.1 Transmitter unwanted emissions outside the 5 725 MHz to 5 875 MHz band 11g34.2.3.1.1 Definition. 11g34.2.3.1.2 Limits 11g34.2.3.1.3 Conformance . 11g34.2.3.2
12、Transmitter unwanted emissions within the 5 725 MHz to 5 875 MHz band . 11g34.2.3.2.1 Definition. 11g34.2.3.2.2 Limits 12g34.2.3.2.3 Conformance . 12g34.2.4 Transmitter Power Control (TPC) 12g34.2.4.1 Definition 12g34.2.4.2 Limit 12g34.2.4.3 Conformance . 12g34.2.5 Receiver spurious emissions . 13g3
13、4.2.5.1 Definition 13g34.2.5.2 Limit 13g34.2.5.3 Conformance . 13g34.2.6 Dynamic Frequency Selection (DFS) . 13g34.2.6.1 General Requirements . 13g34.2.6.2 DFS Technical requirements specifications 13g34.2.6.2.1 Channel availability check and channel revalidation period . 13g34.2.6.2.2 In-Service Mo
14、nitoring . 14g34.2.6.2.3 Channel Shutdown. 14g34.2.6.2.4 Non-Occupancy Period . 15g34.2.7 Receiver Blocking 15g34.2.7.1 Applicability 15g34.2.7.2 Definition 15g34.2.7.3 Performance Criteria . 15g34.2.7.4 Limits 16g34.2.7.5 Conformance . 16g34.2.8 User Access Restrictions 16g3ETSI ETSI EN 302 502 V2.
15、1.1 (2017-03) 4 4.2.8.1 Definition 16g34.2.8.2 Requirement 16g35 Testing for compliance with technical requirements 17g35.1 Environmental conditions for testing . 17g35.1.1 Introduction. 17g35.1.2 Environmental specifications 17g35.2 Interpretation of the measurement results 17g35.3 Definition of ot
16、her test conditions 18g35.3.1 Test sequences and Traffic load 18g35.3.1.1 General test transmission sequences . 18g35.3.1.2 Test transmission sequences for DFS tests 18g35.3.2 Test frequencies 18g35.3.3 Presentation of Equipment 18g35.3.3.1 Integrated and Dedicated antennas 18g35.4 Radio test suites
17、 19g35.4.1 Product information 19g35.4.2 Frequency error . 19g35.4.2.1 Test conditions 19g35.4.2.2 Test methods . 19g35.4.2.2.1 Conducted measurement 19g35.4.2.2.2 Radiated measurement . 20g35.4.3 Transmitter RF Output Power, EIRP, TPC and EIRP Spectral Density . 20g35.4.3.1 Test conditions 20g35.4.
18、3.2 Test method . 20g35.4.3.2.1 Conducted measurement 20g35.4.3.2.2 Radiated measurement . 23g35.4.4 Transmitter unwanted emissions . 23g35.4.4.1 Transmitter unwanted emissions outside the 5 725 MHz to 5 875 MHz band 23g35.4.4.1.1 Test conditions 23g35.4.4.1.2 Test method . 23g35.4.4.2 Transmitter u
19、nwanted emissions within the 5 725 MHz to 5 875 MHz band . 24g35.4.4.2.1 Test conditions 24g35.4.4.2.2 Test method . 24g35.4.5 Receiver spurious emissions . 25g35.4.5.1 Test conditions 25g35.4.5.2 Test method . 25g35.4.5.2.1 Conducted tests 25g35.4.5.2.2 Radiated tests. 26g35.4.6 Dynamic Frequency S
20、election (DFS) . 26g35.4.6.1 Test conditions 26g35.4.6.1.1 Introduction . 26g35.4.6.1.2 Selection of Radar Test Signals . 26g35.4.6.1.3 Test Set-Up 26g35.4.6.2 Test Method 27g35.4.6.2.1 Conducted measurement 27g35.4.6.2.2 Radiated measurement . 31g35.4.7 Receiver Blocking 32g35.4.7.1 Test conditions
21、 32g35.4.7.2 Test Method 32g35.4.7.2.1 Conducted measurements 32g35.4.7.2.2 Radiated measurements . 33g3Annex A (informative): Relationship between the present document and the essential requirements of Directive 2014/53/EU . 34g3Annex B (normative): Test sites and arrangements for radiated measurem
22、ents . 35g3B.1 Test sites . 35g3B.1.1 Open air test sites . 35g3B.1.2 Anechoic chamber 36g3B.1.2.1 General 36g3B.1.2.2 Description 36g3ETSI ETSI EN 302 502 V2.1.1 (2017-03) 5 B.1.2.3 Influence of parasitic reflections . 36g3B.1.2.4 Calibration and mode of use . 37g3B.2 Test antenna 38g3B.3 Substitut
23、ion antenna . 39g3Annex C (normative): General description of measurement . 40g3C.1 Conducted measurements . 40g3C.2 Radiated measurements 40g3C.3 Substitution measurement 41g3Annex D (normative): Dynamic Frequency Selection (DFS) parameters . 42g3Annex E (informative): Bibliography . 45g3Annex F (i
24、nformative): Change History 46g3History 47g3ETSI ETSI EN 302 502 V2.1.1 (2017-03) 6 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI
25、members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.
26、etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to
27、 the present document. Foreword This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Broadband Radio Access Networks (BRAN). The present document has been prepared under the Commissions standardisation request C(2015) 5376 final i.2 to provide one voluntary means of c
28、onforming to the essential requirements of Directive 2014/53/EU on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC i.1. Once the present document is cited in the Official Journal of the European Un
29、ion under that Directive, compliance with the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated EFTA regulations. Na
30、tional transposition dates Date of adoption of this EN: 6 March 2017 Date of latest announcement of this EN (doa): 30 June 2017 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 31 December 2017 Date of withdrawal of any conflicting National Standard (dow): 31 De
31、cember 2018 Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and
32、“must not“ are NOT allowed in ETSI deliverables except when used in direct citation. Introduction The present document covers 5,8 GHz high performance Broadband Fixed Wireless Access systems (BFWA) including equipment which is used in wireless local area networks. Such networks provide high speed da
33、ta communications in between devices connected to the wireless infrastructure. ETSI ETSI EN 302 502 V2.1.1 (2017-03) 7 1 Scope The present document specifies technical characteristics and methods of measurements for Fixed Broadband Data Transmitting Systems intended to operate in the 5,8 GHz band (5
34、 725 MHz to 5 875 MHz). The present document is equally applicable to systems utilizing integral or dedicated antennas. The present document covers the essential requirements of article 3.2 of Directive 2014/53/EU i.1 under the conditions identified in annex A. 2 References 2.1 Normative references
35、References are specific, identified by date of publication and/or edition number or version number. Only the cited version applies. Referenced documents which are not found to be publicly available in the expected location might be found at https:/docbox.etsi.org/Reference/. NOTE: While any hyperlin
36、ks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are necessary for the application of the present document. Not applicable. 2.2 Informative references References are either specific (identified by dat
37、e of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were v
38、alid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. i.1 Directive 2014/53/EU of the European Parliament and
39、 of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC. i.2 Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request to the European
40、 Committee for Electrotechnical Standardisation and to the European Telecommunications Standards Institute as regards radio equipment in support of Directive 2014/53/EU of the European Parliament and of the Council. i.3 ETSI EN 300 019-1-0 (V2.1.2) (09-2003): “Environmental Engineering (EE); Environ
41、mental conditions and environmental tests for telecommunications equipment; Part 1-0: Classification of environmental conditions; Introduction“. i.4 ETSI TR 100 028-1 (V1.4.1) (12-2001): “Electromagnetic compatibility and Radio spectrum Matters (ERM); Uncertainties in the measurement of mobile radio
42、 equipment characteristics; Part 1“. i.5 ETSI TR 100 028-2 (V1.4.1) (12-2001): “Electromagnetic compatibility and Radio spectrum Matters (ERM); Uncertainties in the measurement of mobile radio equipment characteristics; Part 2“. ETSI ETSI EN 302 502 V2.1.1 (2017-03) 8 i.6 CEPT/ECC Report 68 (Riga, J
43、une 2005): “Compatibility studies in the band 5725-5875 MHz between Fixed Wireless Access (FWA) systems and other systems“. 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in Directive 2014/53/EU i.1 and the following
44、 apply: antenna assembly: combination of the antenna (integral or dedicated), its coaxial cable and if applicable, its antenna connector and associated switching components available channel: channel identified as usable as an Operating Channel Broadband Fixed Wireless Access (BFWA): operation of fi
45、xed Point to Point or fixed Point to Multipoint wireless devices or systems used to connect fixed locations burst: period during which radio waves are intentionally transmitted, preceded and succeeded by periods during which no intentional transmission is made dedicated antenna: antenna external to
46、the equipment, using an antenna connector with a cable or a wave-guide NOTE: The antenna has been designed or developed for one or more specific types of equipment. It is the combination of dedicated antenna and radio equipment that is expected to be compliant with the regulations. environmental pro
47、file: declared range of environmental conditions under which equipment within the scope of the present document is required to be compliant in-service monitoring: mechanism to check a channel in use by the device for the presence of a radar signal with a level above the Interference Detection Thresh
48、old integral antenna: antenna designed as a fixed part of the equipment, without the use of an external connector and as such which cannot be disconnected from the equipment by a user with the intend to connect another antenna NOTE 1: An integral antenna may be fitted internally or externally. In th
49、e case where the antenna is external, a non-detachable cable or wave-guide can be used. NOTE 2: Even when equipment with an integral antenna is concerned, it might still be possible to separate the antenna from the equipment using a special tool. In such cases the assessment of the radio equipment and of the antenna against requirements of the present document may be done separately. operating channel: Available Channel on which the FWA device has started transmissions NOTE: An Operating Channel becomes again an Available Channel if the FWA device stopped
