1、ETSI ES 202 912-1 1.1.1 (2003-02) ETSI Standard Access and Terminals (AT); Short Message Service (SMS) for PSTNIISDN; Test Suites for SMS User Based Solution; Part 1 : Protocol Implementation Conformance Statement (PICS) proforma specification user side for Data Link Layer (DLL) Protocol 1 2 ETSI ES
2、 202 912-1 VI .I .I (2003-02) Reference DES/AT-030014-01 Keywords SMS, ISDN, PSTN, PICS ETSI 650 Route des Lucioles F-O6921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 O0 Fax: +33 4 93 65 47 16 Siret No 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-prfecture
3、de Grasse (06) No 7803/88 Important notice Individual copies of the present document can be downloaded from: http:lwmv.etsi .arq The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versio
4、ns, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to rev
5、ision or change of status. Information on the current status of this and other ETSI documents is available at ha p:/pa rta I. etsi I a rgltbistat uslstatus .as p If you find errors in the present document, send your comment to: Cori vriaht Notifica tion No part may be reproduced except as authorized
6、 by written permission. The copyright and the foregoing restriction extend to reproduction in all media. O European Telecommunications Standards Institute 2003. All rights reserved. DECTTM, PLUGTESTSTMand UMTSTMare Trade Marks of ETSI registered for the benefit of its Members. TIPHONTM and the TIPHO
7、N logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI 3 ETSI ES 202 912-1 VI .I .I (2003-02) Contents Intellectual Property Rights . .4 Foreword
8、. 4 Introduction . .4 1 Scope 5 2 References . .5 3 Definitions and abbreviations. . .6 Definitions 6 3.1 3.2 Abbreviations . 6 4 Conformance . .7 Annex A (normative): PICS proformas . 8 A. 1 Guidance for completing the ICs proforma .8 A. 1.1 Purposes and structure . 8 A. 1.2 Abbreviations and conve
9、ntions . 8 A. 1.3 . 10 A.2 Identification of the implementation 1 O 10 10 A.2.1 Date of the statement A.2.2 Implementation Under T cation 11 12 12 Instructions for completing the PICS proforma . . A.2.3 System Under Test (SUT) identification . 11 A.2.4 Product supplier. . . A.2.5 Client (if differen
10、t from . A.2.6 PICS contact person . . A.3 Identification of the reference specification(s) .13 A.4 Global statement of conformance . 13 A.5 PICS proforma tables . 13 A.5.1 Major capabilities . 13 A.5.2 Services-related and terminal capabilities 14 A.5.3 Physical layer (voice band) . A.5.3.2 Physica
11、l layer timers. . A.5.4 Data link layer . Data link layer general message structure and parameters A. 5.4.2 Data link layer messages . A. 5.4.3 Data link layer procedures . A.5.4.4 Data link layer error cause . A. 5.4.5 Data link layer timers and . History . .2 1 15 A.5.3.1 Bit transfer and frame .
12、15 16 16 16 17 18 19 19 Bibliography . 20 A.5.4.1 Annex B (informative): ETSI 4 ETSI ES 202 912-1 VI .I .I (2003-02) Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any
13、, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 3 14: “Intellectual Property Rights (7PRs); Essential, orpotentially Essential, IPRs notlJied to ETSI in respect ofETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on
14、the ETSI Web server (5). All published ETSI deliverables shall include information which directs the reader to the above source of information. Foreword This ETSI Standard (ES) has been produced by ETSI Technical Committee Access and Terminals (AT). The present document is part 1 of a multi-part del
15、iverables covering Short Message Service (SMS) for PSTNASDN; Test Suites for SMS User Based Solution: Part 1: Part 2: Part 3 : Part 4: Part 5: Part 6: Part 7: Part 8: Part 9: Part 10: “Protocol Implementation Conformance Statement (PICS) proforma specification user side for Data Link Layer Protocol
16、1“; “Test Suite Structure and Test Purposes (TSS “Abstract Test Suite (ATS) user side for Data Link Layer (DLL) Protocol 1“; “Protocol Implementation Conformance Statement (PICS) proforma specification user side for Data Link Layer (DLL) Protocol 2“; “Test Suite Structure and Test Purposes (TSS “Abs
17、tract Test Suite (ATS) user side for Data Link Layer (DLL) Protocol 2“; “Test Suite Structure and Test Purposes (TSS “Abstract Test Suite (ATS) user side for functional tests Protocol 1“; “Test Suite Structure and Test Purposes (TSS “Abstract Test Suite (ATS) user side for functional tests Protocol
18、2“. I n t rod uct ion To evaluate conformance of a particular implementation, it is necessary to have a statement of which capabilities and options have been implemented for a given protocol. Such a statement is called an Implementation Conformance Statement (ICs). An ICs stating what capabilities a
19、nd options have been implemented for a particular protocol is called a protocol ICs. This is commonly abbreviated to “PICS“. ETSI 5 ETSI ES 202 912-1 VI .I .I (2003-02) 1 Scope The present document provides the Protocol Implementation Conformance Statement (PICS) proformas for Terminal Equipment imp
20、lementing the Short Message Service (SMS) for PSTNASDN as defined in ES 201 912 i for the Data Link Layer, protocol 1, in compliance with the relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 5. Terminal equipment implementing the Short Message Service (SMS)
21、for PSTNASDN perform circuit-switched voice-band connections to the SM-SC, following the basic call procedures of ISDN or PSTN. PICS for these procedures are not within the scope of the present document. Protocol Implementation Conformance Statements related to the Physical Layer are made to a small
22、 extent, mainly by referring to the FSK protocol as defiied in EN 300 659-1 2 and EN 300 659-2 3. Detailed conformance statements related to the Physical Layer are not within the scope of the present document. Terminal Equipment implementing the Short Message Service (SMS) for PSTNASDN according to
23、protocol 1 are required to implement the Transfer Layer according to TS 100 901 4. PICS for the Transfer Layer are not within the scope of the present document. The supplier of a protocol 1 implementation in a terminal equipment that is claimed to conform to ES 201 912 i, is required to complete a c
24、opy of the PICS proforma provided in annex A of the present document and is required to provide the information necessary to identisl both the supplier and the implementation. 2 Re fe re nces The following documents contain provisions which, through reference in this text, constitute provisions of t
25、he present document. References are either specific (identified by date of publication andor edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. Referenced documents which are not fo
26、und to be publicly available in the expected location might be found at htlu:/docbox.etsi.or:eerence. il ETSI ES 201 912 (Vl.l.1): “Access and Terminals (AT); Short Message Service (SMS) for PSTNASDN; Short Message Communication between a fixed network Short Message Terminal Equipment and a Short Me
27、ssage Service Centre“. ETSI EN 300 659-1 (V1.3.1): “Access and Terminals (AT); Analogue access to the Public Switched Telephone Network (PSTN); Subscriber line protocol over the local loop for display (and related) services; Part 1 : On-hook data transmission“. ETSI EN 300 659-2 (V1.3.1): “Access an
28、d Terminals (AT); Analogue access to the Public Switched Telephone Network (PSTN); Subscriber line protocol over the local loop for display (and related) services; Part 2: Off-hook data transmission“. ETSI TS 100 901 (V7.4.0): “Digital cellular telecommunications system (Phase 2+) (GSM); Technical r
29、ealization of the Short Message Service (SMS) (GSM 03.40 version 7.4.0 Release 1998)“. 21 31 41 51 ISO/IEC 9646-7: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 7: Implementation Conformance Statements“. ETSI 6 ETSI ES 202 912-1 VI .I .
30、I (2003-02) 3 3.1 Definitions and abbreviations De fi nit ions For the purposes of the present document, the terms and definitions given in ES 201 912 i, ISOAEC 9646-7 5 and the following apply: Implementation Conformance Statement (ICs): statement made by the supplier of an implementation or system
31、 claimed to conform to a given specification, stating which capabilities have been implemented NOTE: The ICs can take several forms: protocol ICs, profile ICs, profile specific ICs, and information object ICs. Protocol Implementation Conformance Statement (PICS): ICs for an implementation or system
32、claimed to conform to a given protocol specification PICS proforma: document, in the form of a questionnaire, which when completed for an implementation or system becomes a PICS SM-Call: incoming call for a SM-TE where the CLI contains the address of an SM-SC stored in the SM-TE 3.2 Abbreviations Fo
33、r the purposes of the present document, the following abbreviations apply: Call CLIP CM DLL DMI DTMF FSK GSM ICs ISDN IS0 IUT MSC PICS PSTN SIM SM SME SMS SM-SC SM-TE SM-TL SUT TL UBS Synonymous for voice-band connection Calling Line Identification Presentation Connection Manager Data Link Layer Del
34、iver Mode Identifier Dual Tone Multi-Frequency Frequency Shift Keying Global System for Mobile Communication Implementation Conformance Statement Integrated Services Digital Network International Standard Organization Implementation Under Test Message Sequence Chart Protocol ICs Public Switched Tele
35、phone Network Subscriber Identification Module Short Message(s) Short Message Entity Short Message Service Short Message Service Centre Short Message Terminal Equipment Short Message Transfer Layer System Under Test Transfer (layer) User Based Solution ETSI 7 ETSI ES 202 912-1 VI .I .I (2003-02) 4 C
36、onformance A PICS proforma that conforms to this PICS proforma specification shall be technically equivalent to annex A, and shall preserve the numbering and ordering of the items in annex A. A PICS that conforms to this PICS proforma specification shall: a) b) describe an implementation which confo
37、rms to ES 201 912 i for Protocol 1; be a conforming PICS proforma, which has been completed in accordance with the instructions for completion given in clause A. 1 ; include the information necessary to uniquely identiSl both the supplier and the implementation. c) ETSI 8 ETSI ES 202 912-1 VI .I .I
38、(2003-02) Annex A (normative): PICS proformas Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that users of the present document may freely reproduce the PICS proforma in this annex so that it can be used for its intended purposes and m
39、ay further publish the completed PICS. A. 1 Guidance for completing the ICs proforma A. 1.1 Purposes and structure The purpose of this PICS proforma is to provide a mechanism whereby a supplier of an implementation of the requirements defined in ES 201 912 for Protocol 1, may provide information abo
40、ut the implementation in a standardised manner. The PICS proforma is subdivided into clauses as follows: A. 1 : guidance for completing the various parts of the PICS proforma; A.2: identification of the implementation; A.3: identification of the protocols to which this PICS proforma applies; A.4: gl
41、obal statement of conformance; A.5: PICS proforma tables; - Major capabilities; - Services-related and addressing capabilities; - Physical layer-related PICS; - Data link layer-related PICS. A. 1.2 Abbreviations and conventions The PICS proformas contained in this annex are presented in tabular form
42、 in accordance with the guidelines presented in ISO/IEC 9646-7. A prerequisite line after a clause or before a table title indicates that the whole clause or the whole table is not required to be completed (not applicable) if the predicate is FALSE. A prerequisite line takes the form: Prerequisite:
43、. Notations used inside PICS tables: “Item“ column: The item column contains identifiers related to the items in the table rows. A PICS item is uniquely identified by its identifier throughout all PICS proformas of the present document. “Item description“ column: The item description column describe
44、s in free text each respective item (e.g. parameters, timers, etc.). It implicitly means “is supported by the implementation?“. ETSI 9 ETSI ES 202 912-1 VI .I .I (2003-02) “Reference“ column: The reference column makes reference to clause(s) of one or more standards in the “References“ clause. Since
45、 ES 201 912 is the main standard on which the PICS relate, all references giving clauses numbers without prefixed document reference number, are understood to refer to clauses of ES 201 912. References to other standards are preceded by the standards document reference number n. In case of mixed ref
46、erences, those of ES 201 912 (if any) appear first. When a particular paragraph is referenced inside a clause, the “ character followed by the number of the paragraph within the clause is indicated. All paragraphs except table headers, figure footers or contents of tables are counted, starting from
47、1. “Status“ column: The following notations are used for the status column: M O NIA 0.n mandatory - the capability shall be supported. optional - the capability may be supported or not. not applicable - in the given context, it is impossible to use the capability. qualified optional - for mutually e
48、xclusive or selectable options from a set. “n“ is an integer which identifies an unique group of related optional items. Cm conditional a (possibly nested) construction is defined, where the block between contains a qualifier (Boolean expression) and the blocks before and after contain a more specif
49、ic status reference, where all forms of status notations defined above and including the notation are allowed inside the blocks. The definitions follow the PICS table rows containing items, and are local to the table. References to items of the current table inside the conditions block of definitions are made by giving the item identifier without a prefix. References to items of other PICS tables in the present document are made by giving the item identifier preceded by the table number plus a “.“ character (see examples below). Examples for status