ETSI ETR 153-1994 Methods for Testing and Specification (MTS) Guidance on the Production and Completion of System Conformance Test Report (SCTR) and Protocol Conformance Test Repor.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HB 2624-1976 莫氏锥体转接衬套 外锥按7 24 2-3号.pdf

HB 2625-1976 弹性衬套 d＝1-20.pdf

HB 2629-1976 直柄立铣刀夹头 尾柄按莫氏3-4号.pdf

HB 2630-1976 直柄立铣刀夹头 尾柄按7 24 2-3号.pdf

HB 2631-1976 短锥柄立铣刀夹头 尾柄按莫氏3-5号.pdf

HB 2632-1976 短锥柄立铣刀夹头 尾柄按7 24 2-3号.pdf

HB 2634-1976 套式面铣刀刀杆 尾柄按莫氏3-4号.pdf

HB 2635-1976 套式面铣刀刀杆 尾柄按7 24 2-3号.pdf

HB 2636-1976 铣刀杆 尾柄按莫氏3-4号.pdf