ETSI GSM 03 81-1998 Digital Cellular Telecommunications System (Phase 2+) Line Identification Supplementary Services - Stage 2《欧洲数字蜂窝通信系统(第2+阶段) 线路识别补充业务 第2阶段(版本5 2 0)》.pdf

上传人:twoload295 文档编号:733708 上传时间:2019-01-08 格式:PDF 页数:36 大小:1.06MB
下载 相关 举报
ETSI GSM 03 81-1998 Digital Cellular Telecommunications System (Phase 2+) Line Identification Supplementary Services - Stage 2《欧洲数字蜂窝通信系统(第2+阶段) 线路识别补充业务 第2阶段(版本5 2 0)》.pdf_第1页
第1页 / 共36页
ETSI GSM 03 81-1998 Digital Cellular Telecommunications System (Phase 2+) Line Identification Supplementary Services - Stage 2《欧洲数字蜂窝通信系统(第2+阶段) 线路识别补充业务 第2阶段(版本5 2 0)》.pdf_第2页
第2页 / 共36页
ETSI GSM 03 81-1998 Digital Cellular Telecommunications System (Phase 2+) Line Identification Supplementary Services - Stage 2《欧洲数字蜂窝通信系统(第2+阶段) 线路识别补充业务 第2阶段(版本5 2 0)》.pdf_第3页
第3页 / 共36页
ETSI GSM 03 81-1998 Digital Cellular Telecommunications System (Phase 2+) Line Identification Supplementary Services - Stage 2《欧洲数字蜂窝通信系统(第2+阶段) 线路识别补充业务 第2阶段(版本5 2 0)》.pdf_第4页
第4页 / 共36页
ETSI GSM 03 81-1998 Digital Cellular Telecommunications System (Phase 2+) Line Identification Supplementary Services - Stage 2《欧洲数字蜂窝通信系统(第2+阶段) 线路识别补充业务 第2阶段(版本5 2 0)》.pdf_第5页
第5页 / 共36页
点击查看更多>>
资源描述

1、GSM 1 ECHNICAL n GSM 03.81 August 1998 Version 5.2.0 Source: SMG Reference: RGTS/SMG-030381 QR2 ICs: 33.020 Key words: Digital cellular telecommunications system, Global System for Mobile communications (GSM) Digital cellular telecommunications system (Phase 2+); Li ne i dent if cat i on su p p leme

2、 n ta r y services ; Stage 2 (GSM 03.81 version 5.2.0 Release 1996) ETSI European Telecommunications Standards Institute ETSI Secretariat Postal address: F-O6921 Sophia Antipolis CEDEX - FRANCE Office address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE Internet: secretariat Qetsi.

3、fr - http:/www.etsi.fr - http:/www.etsi.org Tel.: +33 4 92 94 42 O0 - Fax: 43 4 93 65 47 16 Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. O European Telecommunications Sta

4、ndards institute 1998. Ali rights reserved. STDmETSI GSM 03.8L-ENGL Page 2 GCM 03.81 Version 5.2.0 Release 1996: August 1998 3998 3q00855 0333347 ObT W Whilst every care has been taken in the preparation and publication of this document, errors in content, typographical or otherwise, may occur. If y

5、ou have comments concerning its accuracy, please write to “ETSI Standards Making Support Dept.“ at the address shown on the title page. Page 3 GSM 03.81 Version 5.2.0 Release 1996: August 1998 Contents Foreword . 5 O Scope . 7 o . 1 0.2 Definitions and abbreviations . 7 Normative references 7 0.2.1

6、Definitions 7 0.2.1.1 0.2.1.2 Definition of line identity . 7 Definition of presentation and screening indicators . 8 0.2.2 Abbreviations . 8 1 Calling iine identification presentation (CLIP) 9 1.1 Handling of calling line identifkation presentation . 9 1.1.1 interrogation 9 1.2 Functions and inform

7、ation flows 9 1.3 Information stored in the HLR 13 1.4 State transition model 13 1.5 Transfer of information from HLR to VLR 13 1.6 Information stored in the VLR 14 1.7 Handover . 14 2 Calling line identification restriction (CLIR) 15 2.1 Handling of calling line identification restriction . 15 2.1.

8、1 General 15 2.1.2 Permanent mode . 15 2.1.3 Controlling presentation of the CLI when CLIR is provisioned in temporary mode . 15 2.1.4 Interrogation 16 2.2 Functions and information flows 16 2.3 Information stored in the HLR 21 2.4 State transition model 21 2.5 Transfer of information from HLR to VL

9、R 21 2.6 Information stored in the VLR 21 2.7 Handover . 22 2.8 Interworking . 22 3 Connected line identification presentation (COLP) . 23 3.1 Handling of connected line identification presentation . 23 3.1.1 Interrogation 23 3.1.2 Interactions with call forwarding supplementary services . 23 3.2 Fu

10、nctions and information flows 23 3.3 Information stored in the HLR 28 3.4 State transition model 28 3.5 Transfer of information from HLR to VLR 28 3.6 Information stored in the VLR 29 3.7 Handover . 29 4 Connected line identification restriction (COLR) . 30 4.1 Handling of connected line identificat

11、ion restriction . 30 4.1.1 General 30 4.1.2 interrogation 30 4.2 Functions and information flows 30 4.3 information stored in the HLR 34 4.4 State transition model 34 4.5 Transfer of information from HLR to VLR 34 4.6 Information stored in the VLR 34 4.7 Handover . 34 4.8 Interworking . 35 Page 4 GS

12、M 03.81 Version 5.2.0 Release 1996: August 1998 Annex A (informative): Status of Technical Specification GSM 03.81 . 36 History . 37 STD-ETSI GSM 03.8L-ENGL 1998 3q00855 0333350 b54 Page 5 GSM 03.81 Version 5.2.0 Release 1996: August 1998 Foreword This Global System for Mobile communications (GSM) T

13、echnical Specification (GTS) has been produced by the Special Mobile Group (SMG) of the European Telecommunications Standards Institute (ETSI). This GTS defines the stage 2 of the line identification supplementary services for the Digital cellular telecommunications system. The contents of this GTS

14、are subject to continuing work within SMG and may change following formal SMG approval. Should TC-SMG modify the contents of this GTS it will then be republished by ETSI with an identifying change of release date and an increase in version number as follows: Version 5.x.y where: 5 indicates GSM Rele

15、ase 1996 of Phase 2+ x the second digit is incremented for all other types of changes, .e. technical enhancements, corrections, updates, etc. the third digit is incremented when editorial only changes have been incorporated in the specification; y The specification from which this GTS has been deriv

16、ed was originally based on CEPT documentation, hence the presentation of this GTS may not be entirely in accordance with the ETSVPNE rules. STD*ETSI GSM 03-BL-ENGL 1998 II 3400855 033115L 590 9 Page 7 GSM 03.81 Version 5.2.0 Release 1996: August 1998 O Scope This specification gives the stage 2 desc

17、ription of the call identification supplementary services. The group line identification supplementary services are divided into the following four supplementary services: - Calling line identification presentation CLIP (clause 1); - Calling line identification restriction CLIR (clause 2); - Connect

18、ed line identification presentation COLP (clause 3); - Connected line identification restriction COLR (clause 4). o. 1 Normative references This specification incorporates by dated and undated reference, provisions from other publications. These normative references are cited at the appropriate plac

19、es in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this specification only when incorporated in it by amendment or revision. For undated references, the latest edition of the publication referred

20、 to applies. GSM 01.04 (ETR 350): “Digital cellular telecommunications system (Phase 2+); Abbreviations and acronyms“. GSM 03.1 1 (ETS 300 928): “Digital cellular telecommunications system; Technical realization of supplementary services“. 0.2 Definitions and abbreviations 0.2.1 Definitions 0.2.1.1

21、Definition of line identity The line identity is made up of the following information units: - - Optionally subaddress information. For mobile originated calls, the ISDNNSISDN shall always be provided within the network. The subaddress shall only be included if it is provided by the user (or user eq

22、uipment). The calling line identity is the line identity of the calling party. The connected line identity is the line identity of the connected party. The subscribers international ISDN/MSISDN number; The additional calling line identity provides additional line information for the purpose of the c

23、alling line identification presentation service (CLIP). The additional connected line identity provides additional line information for the purpose of the connected line identification presentation service (COLP). For mobile originating calls the user (or user equipment) has no possibility to provid

24、e an additional line identity. For mobile terminating calls the user (or user equipment) has no possibility to provide an additional connected line identity. Previous page is blank Page 8 GSM 03.81 Version 5.2.0 Release 1996: August 1998 0.2.1.2 Definition of presentation and screening indicators In

25、 addition to, or instead of, the line identity or additional line identity, the network may send a presentation indicator (Pi) and/or a screening indicator (SI) or additional screening indicator (asi) to the MS as follows: - Presentation Indicator: a) Presentation allowed; b) Presentation restricted

26、; c) Number not available. - Screening indicator/additional Screening indicator: a) b) User provided, not screened; c) network provided. User provided, verified and passed; The screening indicator or additional screening indicator applies to the ISDN/MSISDN or the number given as additional line ide

27、ntity respectively. 0.2.2 Abbreviations Abbreviations used in this specification are listed in GSM 01.04. STD*ETSI GSM 03-81-ENGL 1778 M 3400855 0331153 3b3 M Interrogate CLIP Release Complete Acknowledge (SI, PI=restricted, LI) NOTE: *. SI: PI: LI: A subaddress may be received from the MS screening

28、 indicator presentation indicator line identity 1 Figure 2.6: Information flow for calling line identification restriction in permanent or temporary mode with the default value “presentation restricted“ MS set-up NOTE: MS C . (present CLI) * MAF 004 VLR MSCb/LE n info request MAF 003 info acknowledg

29、e I I I I * I I info request III II I -I I I II ImFI I II II II I II II III II II III II II II Set-up rn II 10031 I I 004 I I I info acknowledge I I I I I (SI,PI=pres allowed,LI) I I I *. NOTE: , A subaddress may be received from the MS SI: screening indicator PI: presentation indicator LI: line ide

30、ntity Figure 2.8 : Information flow for calling line identification restriction in temporary mode with default value “presentation allowed“ MS MS C VLR MSCb/LE I I I I I -I I I I info request 1 n n I I I i I I Acknowledge 1 I Figure 4.1 : Interrogation of connected line identification restriction 4.

31、2 Functions and information flows The following Mobile Additional Functions have been identified for the PLMN: MAF040 Determination of the connected line identification restriction subscription The ability of a PLMN component to determine whether the supplementary service is provisioned for the mobi

32、le subscriber. See figure 4.2. Location: VLR. MAF041 Determination of the connected party number for offering to the calling party The ability of a PLMN component to determine and to forward the connected line identity and related indications to the calling party. See figure 4.3. Location: terminati

33、ng MSC. The information flow is shown in figures 4.4. STD-ETSI GSM 03-81-ENGL 1998 a 3400855 0331175 T24 M Page 31 GSM 03.81 Version 5.2.0 Release 1996: August 1998 Process COLR-MAF040 , . . . . . . . . . . I. I !Figure 4.2 “i initiate handling of COIR I no sei provision indication = not provisioned 381 -42(1) set provision indication = continue handling ? COLR: Connected Une Identification Restriction. Figure 4.2: MAF040 Determination of connected line identification restriction subscription (VW

展开阅读全文
相关资源
猜你喜欢
  • BS QC 400203-1993 Specification for fixed resistors for use in electronic equipment Blank detail specification Fixed power resistors heat-sink types Assessment level H《电子设备用固定电阻器规范 空白详细规范 固定功率.pdf BS QC 400203-1993 Specification for fixed resistors for use in electronic equipment Blank detail specification Fixed power resistors heat-sink types Assessment level H《电子设备用固定电阻器规范 空白详细规范 固定功率.pdf
  • BS QC 760000-1990 Harmonized system of quality assessment for electronic components Film and hybrid film integrated circuits Generic specification《电子元器件质量评估协调体系 薄膜和混合薄膜集成电路 一般规范》.pdf BS QC 760000-1990 Harmonized system of quality assessment for electronic components Film and hybrid film integrated circuits Generic specification《电子元器件质量评估协调体系 薄膜和混合薄膜集成电路 一般规范》.pdf
  • BS S 148-1969 Specification for low nickel-chromium steel (bar for the manufacture of forged bolts only)《仅用于锻制螺栓的低镍-铬钢棒规范》.pdf BS S 148-1969 Specification for low nickel-chromium steel (bar for the manufacture of forged bolts only)《仅用于锻制螺栓的低镍-铬钢棒规范》.pdf
  • BS S 153-1976 Specification 21 2% nickel-chromium-molybdenum steel billets bars forgings and parts (1230-1430 MPa limiting ruling section 40 mm)《规范 5 2%镍-铬-钼钢方坯、棒材、锻件及零件(1230-1430MPa 限定等圆断面40mm)》.pdf BS S 153-1976 Specification 21 2% nickel-chromium-molybdenum steel billets bars forgings and parts (1230-1430 MPa limiting ruling section 40 mm)《规范 5 2%镍-铬-钼钢方坯、棒材、锻件及零件(1230-1430MPa 限定等圆断面40mm)》.pdf
  • BS S 154-1976 Specification 21 2% nickel-chromium-molybdenum steel billets bars forgings and parts (880-1080 MPa limiting ruling section 150 mm)《规范 5 2%镍-铬-钼钢方坯、棒材、锻件及零件规范(880-1080MPa 限定等圆断面150m.pdf BS S 154-1976 Specification 21 2% nickel-chromium-molybdenum steel billets bars forgings and parts (880-1080 MPa limiting ruling section 150 mm)《规范 5 2%镍-铬-钼钢方坯、棒材、锻件及零件规范(880-1080MPa 限定等圆断面150m.pdf
  • BS S 156-1976 Specification for 4% nickel-chromium-molybdenum case-hardening steel (vacuum arc remelted) billets bars forgings and parts (1320-1520 MPa)《4%镍-铬-钼表面硬化钢(真空电弧重熔)坯、棒材、锻件及零件规范(1320-1520M.pdf BS S 156-1976 Specification for 4% nickel-chromium-molybdenum case-hardening steel (vacuum arc remelted) billets bars forgings and parts (1320-1520 MPa)《4%镍-铬-钼表面硬化钢(真空电弧重熔)坯、棒材、锻件及零件规范(1320-1520M.pdf
  • BS S 157-1976 Specification 3% nickel-chromium-molybdenum case-hardening steel billets bars forgings and parts (1180-1380 MPa)《规范 3%镍-铬-钼表面硬化钢方坯、棒材、锻件及零件(1180-1380MPa)》.pdf BS S 157-1976 Specification 3% nickel-chromium-molybdenum case-hardening steel billets bars forgings and parts (1180-1380 MPa)《规范 3%镍-铬-钼表面硬化钢方坯、棒材、锻件及零件(1180-1380MPa)》.pdf
  • BS S 158-1977 Specification for 1% chromium-molybdenum steel bars for the manufacture of forged bolts and forged nuts《锻制螺栓和螺母的含1%铬-钼钢棒规范》.pdf BS S 158-1977 Specification for 1% chromium-molybdenum steel bars for the manufacture of forged bolts and forged nuts《锻制螺栓和螺母的含1%铬-钼钢棒规范》.pdf
  • BS S 162-1990 Specification for 18% nickel-cobalt-molybdenum maraging steel forging stock forgings bars and parts (1800 MPa double vaccuum melted)《锻坯、锻件、棒材和零件用18%镍-钴-钼马氏体时效钢(1800MPa 双倍真空熔化)规范》.pdf BS S 162-1990 Specification for 18% nickel-cobalt-molybdenum maraging steel forging stock forgings bars and parts (1800 MPa double vaccuum melted)《锻坯、锻件、棒材和零件用18%镍-钴-钼马氏体时效钢(1800MPa 双倍真空熔化)规范》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1