ETSI TS 100 551-1999 Digital Cellular Telecommunications System (Phase 2+) GSM Public Land Mobile Network (PLMN) Access Reference Configuration《数字蜂窝通信系统(第2+阶段) GSM公共陆地移动网(PLMN)的接入参_1.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DS ISO 7216-1993 Acoustics Agricultural and forestry wheeled tractors and self-propelled machines Measurement of noise emitted when in motion《声学 农业和林业用轮式拖拉机及机动机械运动中发出的噪声测量》.pdf

DS ISO 724-1995 ISO general-purpose metric screw threads - Basic dimensions《ISO通用米制螺纹 基本尺寸》.pdf

DS ISO 7241-1-1989 Hydraulic fluid power - Quick-action couplings -Part 1 Dimensions and requirements《液压传动 快换联接器 第1部分：尺寸和要求》.pdf

DS ISO 7256 1-1984 Sowing equipment Test methods Part 1 Single seed drills (precision drills)《播种设备 试验方法 第1部分 单粒点播机( 精密播种机)》.pdf

DS ISO 7256 2-1984 Sowing equipment Test methods Part 2 Seed drills for sowing in lines《播种设备 试验方法 第2部分 条播机》.pdf

DS ISO 7378-1984 Fasteners Bolts screws and studs Split pin holes and wire holes《紧固件 螺栓 螺钉和双头螺柱 开口销孔和穿丝孔》.pdf

DS ISO 7379-1985 Hexagon socket head shoulder screws《内六角头有肩螺钉》.pdf

DS ISO 7425-1-1992 Hydraulic fluid power Housings for elastomer energized plastic-faced seals Dimensions and tolerances Part 1 Piston seal housings《液压传动 弹性增能塑料面密封套 尺寸和公差 第1部分：活塞密封套.pdf

DS ISO 7434-1986 Slotted set screws with cone point《一字槽锥端紧定螺钉》.pdf