1、 ETSI TS 102 587-6 V1.2.1 (2010-09)Technical Specification Electromagnetic compatibilityand Radio spectrum Matters (ERM);Peer-to-Peer Digital Private Mobile Radio;Part 6: Interoperability testing; Test Descriptions (TD)ETSI ETSI TS 102 587-6 V1.2.1 (2010-09)2Reference RTS/ERM-TGDMR-297-6 Keywords di
2、gital, interoperability, mobile, radio, testing, TSS Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI
3、IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword T
4、his Technical Specification (TS) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document is part 6 of a multi-part deliverable covering the Electromagnetic compatibility and Radio spectrum Matters (ERM); Peer-to-Peer Digital
5、Private Mobile Radio, as identified below: Part 1: “Conformance testing; Protocol Implementation Conformance Statement (PICS) proforma“; Part 2: “Conformance testing; Test Suite Structure and Test Purposes (TSS Part 3: “Requirements catalogue“; Part 4: “Conformance testing; Abstract Test Suite (ATS)
6、“; Part 5: “Interoperability testing; Interoperability Test Suite Structure and Test Purposes (TSS Part 6: “Interoperability testing; Test Descriptions (TD)“. ETSI ETSI TS 102 587-6 V1.2.1 (2010-09)51 Scope The present document contains the Test Descriptions (TD) for interoperability testing of the
7、ERM; Peer-to-Peer Digital Private Mobile Radio using FDMA with a channel spacing of 6,25 kHz with e.r.p of up to 500 mW as defined in TS 102 490 1. The objective of this test specification is to provide a basis for interoperability tests for ERM Peer-to-Peer Digital Private Mobile Radio equipment gi
8、ving a high probability of inter-operability between different manufacturers ERM DMR equipment. 2 References References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-sp
9、ecific references, the latest version of the reference document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were va
10、lid at the time of publication ETSI cannot guarantee their long term validity. 2.1 Normative references The following referenced documents are necessary for the application of the present document. 1 ETSI TS 102 490 (V1.6.1): “Electromagnetic compatibility and Radio spectrum Matters (ERM); Peer-to-P
11、eer Digital Private Mobile Radio using FDMA with a channel spacing of 6,25 kHz with e.r.p. of up to 500 mW“. 2 Void. 3 Void. 4 ETSI TS 102 587-3: “Electromagnetic compatibility and Radio spectrum Matters (ERM); Peer-to-Peer Digital Private Mobile Radio; Part 3: Requirements catalogue“. 2.2 Informati
12、ve references The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. Not applicable. ETSI ETSI TS 102 587-6 V1.2.1 (2010-09)63 Abbreviations For the purposes of the present document, the foll
13、owing abbreviations apply: CF (Test) ConFiguration CSF Configured Services and Facilities dPMR digital Private Mobile Radio ISDM Individual Short Data Message ISF Initial Services and Facilities OACSU Off Air Call Set-Up PTT Push To Talk RC Requirements Catalogue RQ ReQuirement TD Test DescriptionTP
14、 Test Purpose TSS Test Suite Structure 4 Test Suite Structure (TSS) The Test Suite Structure is based on the dPMR Requirements Catalogue 4. It is defined by the groups within the following specification of test descriptions. The numbering is not contiguous so that new TDs can be added at a later dat
15、e without the need to completely renumber the TSS groups. The test descriptions have been divided into three groups: - Group 1: Common requirements. - Group 2: CSF requirements. - Group 3: ISF requirements. The sub-grouping of these three group follows the structure of the RC. Some of the sub-groups
16、 of the RC contained no testable requirement. Headings for those sub-groups are in this test purpose document in the node group to give a full view on the relation between RQ and TD. Group 1 “ISF CSF Common“ Group 1.1 “All Call“ Group 1.2 “Channel Access“ Group 1.3 “Framing“ Group 1.3.1 “End frame“
17、Group 1.3.2 “Header frames“ Group 1.3.2.1 “Call information field“ Group 1.3.3 “Packet data frame“ Group 1.3.4 “Superframe“ Group 1.3.4.1 “Type 1 data“ Group 1.3.4.2 “Type 2 data“ Group 1.3.4.3 “Voice“ Group 1.4 “Late Entry“ Group 1.5 “Powersave“ Group 1.6 “Talking Party ID“ Group 2 “CSF“ Group 2.1
18、“Broadcast Call“ Group 2.2 “Dialling Plan“ Group 2.3 “Individual Short Data Message“ Group 2.3.1 “ISDM Free Text Message“ Group 2.3.2 “ISDM Precoded Message“ Group 2.3.3 “ISDM Short File Transfer“ Group 2.3.4 “ISDM Status Message“ Group 2.4 “OACSU“ Group 2.5 “Short Appended Data“ Group 2.6 “Slow Use
19、r Data“ Group 2.7 “Type 3 data“ Group 3 “ISF“ ETSI ETSI TS 102 587-6 V1.2.1 (2010-09)75 Test Descriptions (TD) Configurations that are referenced by test descriptions are shown in annex A. 5.1 ISF CSF Common Group 1 ISF CSF Common 5.1.1 All Call Group 1.1 All Call Test Description Identifier: TD_PMR
20、_0824_01 Test Purpose: TP_PMR_0824_01 Summary: Support of all call with any specific callee ID Roles: ISF Configuration: CF_IDPMRISF_01 References: RQ_001_0824, RQ_001_0824 - ISF QE1 and EUT with QE1 and EUT in standby and using_compatible_vocoders ensure that when QE1 uses Common_ID 255 and EUT use
21、s another Common_ID and QE1_User makes a Call to EUT then EUT_User receives the Call - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Pre-test conditions: Select same RF channel for both QE1 and EUT Select 255 as Common ID on QE1 Select a different Common ID on EUT Step Test Sequence
22、Verdict Pass Fail 1 Cause QE1 to make a call 2 Check that EUT receives the call yes no Observations: Test Description Identifier: TD_PMR_0824_02 Test Purpose: TP_PMR_0824_02 Summary: All call with all call callee ID Roles: ISF Configuration: CF_IDPMRISF_01 References: RQ_001_0824, RQ_001_0824 - ISF
23、QE1 and EUT with QE1 and EUT in standby and using_compatible_vocoders ensure that when QE1 and EUT using Common_ID 255 and QE1_User makes a Call to EUT then EUT_User receives the Call - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Pre-test conditions: Select same RF channel for both
24、 QE1 and EUT Select 255 as Common ID on both QE1 and EUT Step Test Sequence Verdict Pass Fail 1 Cause QE1 to make a call 2 Check that EUT receives the call Yes No Observations: ETSI ETSI TS 102 587-6 V1.2.1 (2010-09)8Test Description Identifier: TD_PMR_0824_03 Test Purpose: TP_PMR_0824_03 Summary: A
25、ll call with all call callee ID Roles: ISF Configuration: CF_IDPMRISF_01 References: RQ_001_0824, RQ_001_0824 - ISF QE1 and EUT with QE1 and EUT in standby and using_compatible_vocoders ensure that when EUT uses Common_ID 255 and QE1 uses another Common_ID and QE1_User makes a Call then EUT_User doe
26、s not receive the Call - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Pre-test conditions: Select same RF channel for both QE1 and EUT Select 255 as Common ID on EUT Select a different value of Common ID on QE1 Step Test Sequence Verdict Pass Fail 1 Cause QE1 to make a call 2 Check
27、if EUT receives the call No Yes Observations: Test Description Identifier: TD_PMR_0858_01 Test Purpose: TP_PMR_0858_01 Summary: All call with all call callee ID Roles: ISF Configuration: CF_IDPMRISF_01 References: RQ_001_0858, RQ_001_0858 - ISF QE1 and EUT with QE1 and EUT in standby and using_compa
28、tible_vocoders ensure that when EUT uses Common_ID 255 and QE1 uses another Common_ID and QE1_User makes a Call then EUT_User does not receive the Call - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Pre-test conditions: Select same RF channel for both QE1 and EUT Select 255 as Commo
29、n ID on EUT and QE1 Step Test Sequence Verdict Pass Fail 1 Cause QE1 to make a call 2 Check if EUT receives the call Yes No Observations: Test Description Identifier: TD_PMR_0858_02 Test Purpose: TP_PMR_0858_02 Summary: All call with all call callee ID Roles: ISF Configuration: CF_IDPMRISF_01 Refere
30、nces: RQ_001_0858, RQ_001_0858 - ISF QE1 and EUT with QE1 and EUT in standby and using_compatible_vocoders ensure that when EUT uses Common_ID 255 and QE1 uses Common_ID 255 and QE1_User makes a Call then EUT_User does receive the Call ETSI ETSI TS 102 587-6 V1.2.1 (2010-09)9- xxxxxxxxxxxxxxxxxxxxxx
31、xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Pre-test conditions: Select same RF channel for both QE1 and EUT Select 255 as Common ID on EUT Select a different value of Common ID on QE1 Step Test Sequence Verdict Pass Fail 1 Cause QE1 to make a call 2 Check if EUT receives the call No Yes Observations: E
32、nd group 1.1 5.1.2 channel access Group 1.2 Channel Access Test Description Identifier: TD_PMR_1006_01 Test Purpose: TP_PMR_1006_01 Summary: Automatic call termination within 180 seconds Roles: ISF Configuration: CF_IDPMRISF_01 References: RQ_001_1006 - ISF QE1 and EUT with (EUT and QE1 using same C
33、ommon_ID and powersave_disabled and using_compatible_vocoders) and QE1 and EUT in standby ensure that when EUT_User makes a PTT_Call and PTT_Key is not released then QE1_User receives PTT_Call and EUT terminates the PTT_Call after 180 seconds - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
34、xxxxxx Pre-test conditions: Select same RF channel for both QE1 and EUT Select same Common ID for both QE1 and EUT Step Test Sequence Verdict Pass Fail 1 Cause EUT to make a voice call to QE1 and start timer 2 Keep EUT transmitting until QE1 stops receiving the voice call 3 Stop timer when QE1 stops
35、 receiving 4 Check that timer value is 180 seconds or less Yes No Observations: Test Description Identifier: TD_PMR_1006_02 Test Purpose: TP_PMR_1006_02 Summary: Automatic call termination within 180 seconds Roles: CSF Configuration: CF_IDPMRCSF_01 References: RQ_001_1006 - CSF QE1 and EUT with (EUT
36、 and QE1 powersave_disabled and using_compatible_vocoders) QE1 in standby ensure that when EUT_User makes a Voice_Transmission addressed to QE1 and PTT_Key is not released then QE1_User receives Voice_Transmission and EUT terminates the Voice_Transmission after 180 seconds - xxxxxxxxxxxxxxxxxxxxxxxx
37、xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx ETSI ETSI TS 102 587-6 V1.2.1 (2010-09)10Pre-test conditions: Select same RF channel for both QE1 and EUT Select or enter a talkgroup address for QE1 on EUT Step Test Sequence Verdict Pass Fail 1 Cause EUT to make a voice call to QE1 and start timer 2 Keep EUT t
38、ransmitting until QE1 stops receiving the voice call 3 Stop timer when QE1 stops receiving 4 Check that timer value is 180 seconds or less Yes No Observations: Test Description Identifier: TD_PMR_1006_03 Test Purpose: TP_PMR_1006_03 Summary: Automatic call termination within 180 seconds and call res
39、ume Roles: ISF Configuration: CF_IDPMRISF_01 References: RQ_001_1006 - ISF QE1 and EUT with (EUT and QE1 using same Common_ID and powersave_disabled and using_compatible_vocoders) and EUT in call_timeout_terminated ensure that when EUT_User releases and presses PTT_Key again then QE1_User receives P
40、TT_Call - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Pre-test conditions: Select same RF channel for both QE1 and EUT Select same Common ID for both QE1 and EUT Step Test Sequence Verdict Pass Fail 1 Cause EUT to transmit until QE1 stops receiving the call 2 De-key the transmitter
41、 of the EUT 3 Re-key the transmitter of the EUT 4 Check if QE1 starts to receive the call from EUT Yes No Observations: Test Description Identifier: TD_PMR_1006_04 Test Purpose: TP_PMR_1006_04 Summary: Automatic call termination within 180 seconds and call resume Roles: CSF Configuration: CF_IDPMRCS
42、F_01 References: RQ_001_1006 - CSF QE1 and EUT with (EUT and QE1 powersave_disabled) and EUT in call_timeout_terminated ensure that when EUT_User releases and presses the PTT_Key again then QE1_User receives Voice_Transmission - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Pre-test
43、conditions: Select same RF channel for both QE1 and EUT Select or enter a talkgroup address for QE1 on EUT Step Test Sequence Verdict Pass Fail 1 Cause EUT to transmit until QE1 stops receiving the call 2 De-key the transmitter of the EUT 3 Re-key the transmitter of the EUT 4 Check if QE1 starts to
44、receive the call from EUT Yes No Observations: ETSI ETSI TS 102 587-6 V1.2.1 (2010-09)11Test Description Identifier: TD_PMR_1008_01 Test Purpose: TP_PMR_1008_01 Summary: Channel access in own call Roles: ISF Configuration: CF_IDPMRISF_02 References: RQ_001_1008, RQ_001_1008 - ISF QE1, QE2 and EUT wi
45、th (EUT and QE1 and QE2) using the same Common_ID and using_compatible_vocoders) and QE1 is transmitting ensure that when EUT_User makes PTT_Call then QE2_User receives the PTT_Call from EUT - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Pre-test conditions: Select same RF channel f
46、or QE1, QE2 and EUT Select same Common ID for QE1, QE2 and EUT Step Test Sequence Verdict Pass Fail 1 Cause QE1 to make a voice call to QE2 2 Cause EUT to make a voice call to QE2 while QE1 is still transmitting 3 Check if QE2 receives the voice call from EUT Yes No Observations: Test Description Id
47、entifier: TD_PMR_1008_02 Test Purpose: TP_PMR_1008_02 Summary: Channel access in own call Roles: CSF Configuration: CF_IDPMRCSF_02 References: RQ_001_1008 - CSF QE1, QE2 and EUT with (EUT and QE1 and QE2) using the same call_group and using_compatible_vocoders) and QE1 is transmitting Voice_Transmis
48、sion to EUT ensure that when EUT_User makes a Voice_Transmission to QE2 then QE2_User receives the Voice_Transmission from EUT - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Pre-test conditions: Select same RF channel for QE1, QE2 and EUT Select same Talkgroup address for QE1, QE2 a
49、nd EUT Step Test Sequence Verdict Pass Fail 1 Cause QE1 to make a voice call to QE2 2 Cause EUT to make a voice call to QE2 while QE1 is still transmitting 3 Check if QE2 receives the voice call from EUT Yes No Observations: ETSI ETSI TS 102 587-6 V1.2.1 (2010-09)12Test Description Identifier: TD_PMR_1009_01 Test Purpose: TP_PM
