1、 ETSI TS 102 708-1-1 V1.1.1 (2010-03)Technical Specification Intelligent Transport Systems (ITS);RTTT;Test specifications for High Data Rate (HDR) datatransmission equipment operating in the 5,8 GHz ISM band;Part 1: Data Link Layer;Sub-Part 1: Protocol Implementation ConformanceStatement (PICS) prof
2、orma specificationETSI ETSI TS 102 708-1-1 V1.1.1 (2010-03) 2Reference DTS/ITS-0020002 Keywords DSRC, MAC, LLC, PICS, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non l
3、ucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived differe
4、nce in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that
5、 the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/por
6、tal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2010. All rights reserved. DECTTM, PLUG
7、TESTSTM, UMTSTM, TIPHONTM, the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. LTE is a Trade Mark of ETSI currently being registered for
8、 the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 102 708-1-1 V1.1.1 (2010-03) 3Contents Intellectual Property Rights 4g3Foreword . 4g31 Scope 5g32 References 5g32.1 Normative references
9、 . 5g32.2 Informative references 6g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 6g34 Overview of the templates 6g35 Conformance requirement concerning PICS 6g3Annex A (normative): PICS proforma for HDR DSRC data link layer . 7g3A.1 Guidance for completing the PICS pro
10、forma . 7g3A.1.1 Purposes and structure 7g3A.1.2 Abbreviations and conventions 7g3A.1.3 Instructions for completing the PICS proforma 9g3A.2 Identification of the implementation 9g3A.2.1 Date of the statement 9g3A.2.2 Implementation Under Test (IUT) identification . 9g3A.2.3 System Under Test (SUT)
11、identification 10g3A.2.4 Product supplier 10g3A.2.5 Client (if different from product supplier) 10g3A.2.6 PICS contact person . 11g3A.3 Identification of the protocol 11g3A.4 Global statement of conformance . 12g3A.5 General requirements . 12g3A.6 LLC Data Service . 12g3A.6.1 LLC Frame format 12g3A.
12、6.2 LLC Address and Information Fields . 12g3A.6.3 Protocol procedures 13g3A.6.4 LLC frame size and timing . 13g3History 14g3ETSI ETSI TS 102 708-1-1 V1.1.1 (2010-03) 4Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The inf
13、ormation pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from th
14、e ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR
15、 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Intelligent Transport System (ITS). The present document is part 1, sub-part 1 of a multi-
16、part deliverable covering the test specifications for High Data Rate (HDR) Dedicated Short Range Communication (DSRC), as identified below: Part 1: “Data Link Layer“; Sub-part 1: “Protocol Implementation Conformance Statement (PICS) proforma specification“; Sub-part 2: “Test Suite Structure and Test
17、 Purposes (TSS Sub-part 3: “Abstract Test Suite (ATS) and partial PIXIT proforma“; Part 2: “Application Layer Common Application Service Elements“. ETSI ETSI TS 102 708-1-1 V1.1.1 (2010-03) 51 Scope The present document specifies Protocol Implementation Conformance Statement (PICS) proformas for the
18、 OSI data link layer of HDR DSRC as defined in ES 200 467-1 1, in compliance with the relevant requirements, and in accordance with the relevant guidance given in ISO/IEC 9646-7 3 and in ETS 300 406 4. This proforma is intended for use by suppliers of equipment which is claimed to conform to the HDR
19、 DSRC data link layer, as specified in ES 200 674-1 1. To evaluate conformance of a particular implementation, it is necessary to have a statement of which capabilities and options have been implemented for a telecommunication specification. Such a statement is called an Implementation Conformance S
20、tatement (ICS). The present document provides proforma ICS templates, to be filled in by equipment suppliers. 2 References References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For a specific reference, subsequent revisions do not
21、 apply. Non-specific reference may be made only to a complete document or a part thereof and only in the following cases: - if it is accepted that it will be possible to use all future changes of the referenced document for the purposes of the referring document; - for informative references. Refere
22、nced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity. 2.1 Normative references Th
23、e following referenced documents are indispensable for the application of the present document. For dated references, only the edition cited applies. For non-specific references, the latest edition of the referenced document (including any amendments) applies. 1 ETSI ES 200 674-1: “Electromagnetic c
24、ompatibility and Radio spectrum Matters (ERM); Road Transport and Traffic Telematics (RTTT); Part 1: Technical characteristics and test methods for High Data Rate (HDR) data transmission equipment operating in the 5,8 GHz Industrial, Scientific and Medical (ISM) band“. 2 ISO/IEC 9646-1: “Information
25、 technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1: General concept“. 3 ISO/IEC 9646-7: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 7: Implementation Conformance Statements“. 4 ETSI ETS
26、 300 406: “Methods for testing and Specification (MTS); Protocol and profile conformance testing specifications; Standardization methodology“. ETSI ETSI TS 102 708-1-1 V1.1.1 (2010-03) 62.2 Informative references The following referenced documents are not essential to the use of the present document
27、 but they assist the user with regard to a particular subject area. For non-specific references, the latest version of the referenced document (including any amendments) applies. Not applicable. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and d
28、efinitions given in ES 200 674-1 1, ISO/IEC 9646-1 2, ISO/IEC 9646-7 3 and the following apply: Implementation Conformance Statement (ICS): statement made by the supplier of an implementation or system claimed to conform to a given specification, stating which capabilities have been implemented ICS
29、proforma: document, in the form of a questionnaire, which when completed for an implementation or system becomes an ICS 3.2 Abbreviations For the purposes of the present document, the abbreviations given in ES 200 674-1 1, ISO/IEC 9646-1 2, ISO/IEC 9646-7 3 and the following apply: DSRC Dedicated Sh
30、ort Range Communication FCS Frame Check Sequence ICS Implementation Conformance Statement IUT Implementation Under Test LLC Logical Link Control MAC Medium Access Control OBU On Board Unit, an alternative descriptor to Mobile Equipment PICS Protocol Implementation Conformance Statement RSU Road Side
31、 Unit, an alternative descriptor to Fixed Equipment RTTT Road Transport and Traffic Telematics SUT System Under Test 4 Overview of the templates The present document contains common PICS templates for On Board Unit (OBU) and Road Side Unit (RSU), for the OSI data link layer of HDR DSRC. 5 Conformanc
32、e requirement concerning PICS The actual PICS proforma to be filled in by a supplier shall be technically equivalent to the text of the PICS proforma given in annex A, and shall preserve the numbering/naming and ordering of the proforma items. An ICS which conforms to the present document shall be a
33、 conforming PICS proforma completed in accordance with the instructions for completion given at the start of each annex. ETSI ETSI TS 102 708-1-1 V1.1.1 (2010-03) 7Annex A (normative): PICS proforma for HDR DSRC data link layer Notwithstanding the provisions of the copyright clause related to the te
34、xt of the present document, ETSI grants that users of the present document may freely reproduce the PICS proforma in this annex so that it can be used for its intended purposes and may further publish the completed PICS. A.1 Guidance for completing the PICS proforma A.1.1 Purposes and structure The
35、purpose of this PICS proforma is to provide a mechanism whereby a supplier of an implementation of the requirements defined in ES 200 674-1 1 may provide information about the implementation in a standardized manner. The PICS proforma is subdivided into clauses for the following categories of inform
36、ation: - guidance for completing the PICS proforma; - identification of the implementation; - identification of the protocol; - global statement of conformance; - PICS proforma tables. A.1.2 Abbreviations and conventions The PICS proforma contained in this annex is comprised of information in tabula
37、r form in accordance with the guidelines presented in ISO/IEC 9646-7 3. Item column The item column contains a number which identifies the item in the table. Item description column The item description column describes in free text each respective item (e.g. parameters, timers, etc.). It implicitly
38、 means “is supported by the implementation?“. ETSI ETSI TS 102 708-1-1 V1.1.1 (2010-03) 8Status column The following notations, defined in ISO/IEC 9646-7 3, are used for the status column: m mandatory - the capability is required to be supported. o optional - the capability may be supported or not.
39、n/a not applicable - in the given context, it is impossible to use the capability. x prohibited (excluded) - there is a requirement not to use this capability in the given context. o.i qualified optional - for mutually exclusive or selectable options from a set. “i“ is an integer which identifies an
40、 unique group of related optional items and the logic of their selection which is defined immediately following the table. ci conditional - the requirement on the capability (“m“, “o“, “x“ or “n/a“) depends on the support of other optional or conditional items. “i“ is an integer identifying an uniqu
41、e conditional status expression which is defined immediately following the table. Reference column The reference column makes reference to ES 200 674-1 1, except where explicitly stated otherwise. Support column The support column shall be filled in by the supplier of the implementation. The followi
42、ng common notations, defined in ISO/IEC 9646-7 3, are used for the support column: Y or y supported by the implementation. N or n not supported by the implementation. N/A, n/a or - no answer required (allowed only if the status is n/a, directly or after evaluation of a conditional status). NOTE: As
43、stated in ISO/IEC 9646-7 3, support for a received PDU requires the ability to parse all valid parameters of that PDU. Supporting a PDU while having no ability to parse a valid parameter is non-conformant. Support for a parameter on a PDU means that the semantics of that parameter are supported. Val
44、ues allowed column The values allowed column contains the type, the list, the range, or the length of values allowed. The following notations are used: - range of values: example: 5 20 - list of values: , , ., example: 2 ,4 ,6 ,8, 9 example: 1101B, 1011B, 1111B example: 0AH, 34H, 2FH - list of named
45、 values: (), (), ., () example: reject(1), accept(2) - length: size ( ) example: size (1 8) Values supported column The values supported column shall be filled in by the supplier of the implementation. In this column, the values or the ranges of values supported by the implementation shall be indica
46、ted. ETSI ETSI TS 102 708-1-1 V1.1.1 (2010-03) 9References to items For each possible item answer (answer in the support column) within the PICS proforma a unique reference exists, used, for example, in the conditional expressions. It is defined as the table identifier, followed by a solidus charact
47、er “/“, followed by the item number in the table. If there is more than one support column in a table, the columns are discriminated by letters (a, b, etc.), respectively. EXAMPLE 1: A.5/4 is the reference to the answer of item 4 in table 5 of annex A. EXAMPLE 2: A.6/3b is the reference to the secon
48、d answer (i.e. in the second support column) of item 3 in table 6 of annex A. Prerequisite line A prerequisite line takes the form: Prerequisite: . A prerequisite line after a clause or table title indicates that the whole clause or the whole table is not required to be completed if the predicate is
49、 FALSE. A.1.3 Instructions for completing the PICS proforma The supplier of the implementation shall complete the PICS proforma in each of the spaces provided. In particular, an explicit answer shall be entered, in each of the support or supported column boxes provided, using the notation described in clause A.1.2. If necessary, the supplier may provide additional comments in space at the bottom of the tables or separately. A.2 Identification of the implementation Identification of the Implementation Under Test (IUT) an
